Votos - 3, Puntuación media: 4.3
(
)
)
|
Resumen del manual
System Configurations & Part Numbers 26 NEW SYSTEMS MFR-2210 MFR-2220 MFR-2240 MFR-2241 MFR-2211 MFR-2222 Example MFR-2241MFR-2xxx MFR-x2xx MFR-xx4x MFR-xxx1 = 2 Outputs = 2 Dual, no pump = 4 Tweezers = 1 Cartridge Confidential and Proprietary to OK International. © OK International All rights reserved. System Configurations & Part Numbers 26 NEW SYSTEMS MFR-2210 MFR-2220 MFR-2240 MFR-2241 MFR-2211 MFR-2222 Example MFR-2241MFR-2xxx MFR-x2xx MFR-xx4x MFR-xxx1 = 2 Outputs = 2 Dual, no pump = 4 Tweezers = 1 Cartridge Power Supply Comparison MFR-PS1K (Existing) Power: 50W Output: dual switched Two position switch-left or right Markings on front panel: none Sleep function: “Auto-Standby”, user selectable to one hour Auto-off: user adjustable to 2.5 hours MFR-PS2200 (New) Power: 60W Output: dual simultaneous Three position switch: left, center (both) or right Markings on front panel: “I II I” Sleep function: via Auto Sleep Workstands Auto-Off: fixed at two hours Confidential and Proprietary to OK International. © OK International All rights reserved. Confidential and Proprietary to OK International. © OK International All rights reserved. 4 Hand-piece Guide New Hand-piece Existing Hand-pieces Description Tips & Cartridges MFR-H1-SC MFR-HSR Hand-piece, soldering cartridge SFP & RFP MFR-H2-ST MFR-HPS Hand-piece, soldering tip SFV MFR-H4-TW MFR-HPT Hand-piece, tweezers cartridge TFP Design Change of New Hand-pieces The new hand-pieces, MFR-H1-SC, MFR-H2-ST & MFR-H4-TW, do not contain the motion switch which detects movement and activates the “Auto-Standby” or “Auto-Off” modes in the existing model, MFR-PS1K. Backwards Compatibility: New Hand-pieces to Old Power Supply The new hand-pieces can be used with the old power supplies (MFR-PS1K) but MUST also include an Auto Sleep Workstand (WS1). NOTE: When the new hand-pieces are used with the MFR-PS1K, the “Auto-Off” function will not function. WHILE THE NEW HAND-PIECES CAN BE USED WITH THE EXISTING POWER SUPPLY (MFR-PS1K), IT IS NOT RECOMMENDED. Forward Compatibility: Old Hand-pieces to New Power Supply The new power supply (MFR-PS2200) will operate all of the old hand-pieces. HOWEVER, the old handpieces must use Auto Sleep Workstands to retain the "sleep" function. Confidential and Proprietary to OK International. © OK International All rights reserved. 5 Upgrade Kits New Upgrade Kit Existing Upgrade Kit Hand-piece Workstand MFR-UK1 MFR-SRC-AD MFR-H1-SC: hand-piece, solder cartridge WS1: Sleeper workstand, black cradle MFR-UK2 MFR-PST-AD MFR-H2-ST: hand-piece, solder tip WS1: sleeper workstand, black cradle MFR-UK4 MFR-PTZ-AD MFR-H4-TW: hand-piece, precision tweezers MFR-WSPT: workstand, black cradle Upgrade Kits allow the user to add hand-pieces and workstands as needed. There is no financial “penalty” for adding to an existing system. Confidential and Proprietary to OK International. © OK International All rights reserved. 5Upgrade Kits New Upgrade Kit Existing Upgrade Kit Hand-piece Workstand MFR-UK1 MFR-SRC-AD MFR-H1-SC: hand-piece, solder cartridge WS1: Sleeper workstand, black cradle MFR-UK2 MFR-PST-AD MFR-H2-ST: hand-piece, solder tip WS1: sleeper workstand, black cradle MFR-UK4 MFR-PTZ-AD MFR-H4-TW: hand-piece, precision tweezers MFR-WSPT: workstand, black cradle Upgrade Kits allow the user to add hand-pieces and workstands as needed. There is no financial “penalty” for adding to an existing system. ...