Votos - 6, Puntuación media: 4.2
(
)
)
|
Resumen del manual
a. Contact local solid waste authorities for instructions on correct disposal or recycling of a propane cylinder. Never puncture or set fire to an empty propane cylinder. b. Keep valve protective caps in place when cylinders are not in use. c. Never use a propane tank if it shows signs of: Dents, corrosion, gouges, bulges, fire damage, leakage, excessive rust, or any other form of visual external damage. d. Store propane cylinders properly: • Store the cylinder in a well-ventilated area marked for cylinder storage only. • Store propane cylinders away from oxidizing or corrosive gas cylinders. • Store empty cylinders away from full cylinders and label empty cylinders clearly. • Do not store propane fuel in temperatures exceeding 120° F. • Keep the propane cylinder upright when using and storing. SKU 91894 For technical questions, please call 1-800-444-3353. Page 3 SPECIFIC PRODUCT WARNINGS (continued) SPECIFIC PRODUCT WARNINGS (continued) . Risk of FIRE. a. Before each use, always check all propane connections and joints to make sure no leaks are present. Also check hoses for cracks or excessive wear. Always replace a damaged hose. b. If, while using the Propane Torch, you notice the odor of propane, immediately shut off the propane fueling the Torch. Extinguish all open flames, and carefully check for leaks by using soapy water. Never use a flame to check for leaks. If the odor continues, do not use the Torch and move the propane tank outside, if it is not already outside. Call your local propane supplier for assistance. c. Make sure the Hand Wheel (13) is turned to its “OFF” position and the propane tank (not included) is removed when the Propane Torch is not in use. d. Never use gasoline, kerosene, or other highly volatile fluids as a starter as they can explode. e. Never leave the Propane Torch unattended once it is lit. f. Keep a fire extinguisher handy. Always keep a commercial fire extinguisher nearby the Propane Torch in case of accidental fire. g. Do not clean the Propane Torch with cleaners that are combustible or corrosive. h. Do not paint any part of the Propane Torch. i. Never smoke while using the Propane Torch. Make sure all surrounding flames are extinguished. j. Do not use this product with any fuels other than propane. 4. The Burner (20) gets VERY HOT during use. a. Do not aim the Burner (20) at yourself, others, or animals. Keep spectators clear of the work area. b. Always allow sufficient time for the Propane Torch to completely cool down before storing. 5. Never reach across the Propane Torch while in use. Be aware that parts of the Propane Torch become extremely hot during operation. 6. Maintain labels and nameplates on the Propane Torch. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement. 7. WARNING! The brass components of this product contain lead, a chemical known to the State of California to cause birth defects (or other reproductive harm). (California Health & Safety Code 25249.5, et seq.) 8. WARNING! This product, when used with propane fuel, produces chemicals known to the State of California to cause cancer and birth defects (or other reproductive harm). (California Health & Safety Code 25249.5, et seq.) SKU 91894 For technical questions, please call 1-800-444-3353. Page 4 Assembly Assembly Your Propane Torch comes fully assembled. Operation To assist you with operation please refer to the Operational Figure on this page. You should also refer to the Assembly Diagram on page 7 and the Parts List on page 6. Never force the tool or attachment to do the work of a larger industrial tool. It is designed to do the job better and more safely at the rate for which it was intended. This tool is designed to be used and operated on L.P. Gas (Propane) which is found in a disposable Propane bottle. Step 1) Make sure that the Hand Wheel (13) is tightened completely before attaching the torch. Firmly insert the Gas Inlet (1) into the Propane canister and screw the Gas Inlet into place. It is normal for some propane to escape while doing this. If you continue to smell or hear gas leaking, tighten to torch or reinstall it. Warning: Make sure the work area is clear of people and animals. Always move the Burner Nozzle in a controlled manner. Always be alert to the path of the flame! Step 2) While making sure that you are clear of the outlet of the Torch, open the Hand Wheel slightly to allow L.P. gas to flow to the Burner Nozzle (20). Draw out the flame by placing a long lit match stick or similarly lit device near the Propane Torch’s Burner Nozzle. This will create a flame. Step 3) Adjust the flame to a reasonable level by turning the Hand Wheel (13). Note: The lit burner should operate with a blue flame with a small yellow tip. Adjust the knob if the flame is sputtering or popping. Gas Inlet Burner Nozzle (20) Hand Wheel (13) SKU 91894 For technical questions, please call 1-800-444-3353. Page 5 Operation (continued) Operation (continued)...