Votos - 5, Puntuación media: 4.4
(
)
)
|
Resumen del manual
J Pull the mains plug after each use. Never let the cord 18 hang down over the edge of the work surface so that the appliance can not be pulled down accidentally. J Let the appliances completely cool down, before you remove the remaining water from the base of the appliance/water tank 10. J aTTEnTIOn! HaZarD OF FIrE! Do not operate the steamer in the proximity of or below curtains, wall cupboards or other inflammable materials. J Place the appliance on a heat resistant surface (no varnished tables, no table cloths). Do not operate it in the vicinity of other sources of heat (oven, gas flame). Otherwise, the appliance and / or pieces of furniture may be damaged. J Place the appliance on an even, stable surface at a safe distance to walls and cupboards in order to avoid any damage caused by steam rising. GB/IE Safety/Prior to Initial Use/Initial Operation J J J Always fill the base of the appliance / water tank 10 with sufficient water for the period of steaming. Do not cover the base of the appliance / water tank 10 with aluminium foil or any other material. If not observed, this can lead to an overheating of the appliance. Damage of the appliance is the consequence. Never immerse the appliance in water and always pull the mains plug before cleaning or transporting it. FOOD-SaFE! The taste and smell of your food are not detrimentally affected by this product. J J J J J J J avoid the hazard of life by electric shock: Make sure that the details on the rating label are in conformity with your mains voltage. Only connect the unit to alternating current. Do not at all operate this unit with an external timer or a separate telecontrol system. Check the power cord 18 regularly for damage or deterioration. Do not operate the appliance when the power cord 18 or the mains plug is damaged. aTTEnTIOn! A damaged power cord 18 presents a hazard of life by electric shock. Have appliances, which do not work faultlessly or which are damaged, immediately and only checked and repaired by the after-sales service. Do not use the power cord 18 for unplugging the appliance. Keep the power cord 18 away from hot surfaces, sharp edges and mechanical forces. Damaged or entangled cords 18 increase the risk of an electric shock. Do not operate the appliance outside. Never let the power cord 18 become wet or damp during operation. Unplug the power cord 18 when you are not operating the appliance. Q Use Original accessories J Only use accessories and additional equipment stated in the instruction manual. The use of other products or accessories than recommended in the instruction manual may present a risk of injuries for you. Q Prior to Initial Use J Clean all detachable parts prior to the initial use with warm soapy water and dry them carefully. Wipe the interior of the base of the appliance/ water tank 10 with a damp cloth. Q Initial Operation Observe the mains voltage. The mains voltage of the power source must be in conformity with the details on the rating label of the appliance. Appliances declared with 230V can also be operated with 220V. j Place the base of the appliance 10 on a stable, even surface. j Then place the black turbo ring 8 onto the heating element 11 mounted in the centre. Make sure that the larger side faces downwards. j Now fill the base of the appliance/water tank 10 with cold water up to the MAX mark 19. note: Consider that the base of the appliance/ water tank 10 has to be filled with water at least up to the MIN mark 9 . aTTEnTIOn! HaZarD OF BUrnS! Make sure that the water does not exceed the MAX mark 19. Otherwise, hot water may spurt out of the appliance during operation. aTTEnTIOn! Do not add anything like seasonings etc. to the water. This may affect the steam flow and/or damage the surface of the base of the appliance/water tank 10 and the heating element 11. j Now place the black condensate collection basin 7 onto the base of the appliance 10. Make sure that the semi-circular elevation GB/IE points to the front towards the keypad and is level. Thus, the turbo ring 8 will be kept in position. j Place the food in the steam trays 3 , 4 , 6 . j Ensure that all parts are positioned correctly before switching on the appliance. aTTEnTIOn! Never use bowls or other parts, not especially produced for this appliance. Otherwise, there may be the risk of injuries and / or damage of the appliance. j Now place the steam trays 3 , 4 , 6 in 1 -2 -3 succession (please see the markings on the handles) on top of the condensate collection basin 7 . j Place the cover 1 centrically so that the upper steam tray 3 is completely closed and no steam can exhaust. j Connect the mains plug 18 to a suitable socket. j The LC display 13 shows “45” (see Fig. B). Now your steamer is ready for use. Q Setting the clock Proceed as follows: j Simultaneously press the PROG 17 and ON/ OFF 14 buttons for 2 -3 seconds. A signal tone will be heard on releasing the buttons. j Press the PLUS button 16 to increase the time indicator 20 by 10 minutes ea...