Iniciar sesión:
Votos - 5, Puntuación media: 3.8 ( )

Manual de usuario Motion, modelo CL900 TABLET PC FWS-001

Fabricar: Motion
Tamaño del archivo: 328.88 kb
Nombre del archivo: FWS-001_CL900_Mini-SAR.pdf
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


Keep this document nearby, so you can refer to it later. For detailed operating instructions and safety information, see The Motion Tablet PC model FWS-001 is marketed and/or known as the CL900. Note: The Motion Tablet PC model FWS-001 is compliant to the IEC/EN 60950-1:2006+A11:2009 Safety Standard for Information Technology Equipment. Symbol description The following symbols may appear on the products or accessories. Federal Communications Commission Compliance with Nemko CCL for general product safety in accordance with UL 60950-1 (ITE) and CAN/CSA C22.2 No. 60950-1 (ITE) Canada Interference-Causing Equipment Standard #3 Class B devices Canada ICES-003,Class B Compliance with R&TTE Directive 1999/5/EC for radio frequency devices Conformite Europene; compliance to EMC and Low Voltage Directives of the European Union Product complies with 2002/ 96/EC Compliance with the Independent Communications Authority of South Africa Compliance with Australian and New Zealand EMC, EMR, Radio communication, and Telecommunication Standards (A-Tick symbol) Compliance with the Korea Certification Commission for EMC, Safety, and Telecommunications Infocomm Development Authority for Singapore Normalizacion Y Certification Electronica A.C. (NYCE) Instituto Argentino de Normalizacion y Certificacion (IRAM) Agencia Nacional de Telecomunicacoes (ANATEL) Specifications On Off (Storage) Temperature 5–45° C 0–45° C (with SSD option) -20–60° C Humidity 8–90% RH 5–95% RH Air pressure 697–1060 hPa 187–1060 hPa Power supply (ITE) Delta Electronics, SADP-65NB Rev. BB Input: 1.5 A, 100–240 VAC, 47–63 Hz Output: 19 V DC, 3.42 A The power supply is compliant with UL 60950-1, CAN/CSA C22.2 No. 60950-1, and IEC/EN 60950-1 Product safety information Motion Tablet PCs are designed to optimize safety, minimize strain, and withstand the rigors of portability. However, to further reduce the risk of injury or damage to the unit, you should observe certain precautions. Mounting and installation disclaimer Motion Computing shall not be liable under any theory of liability (including, without limitation, contract, tort or statutory law) for any loss, damage, personal injury, or other damage of any nature (including, without limitation, direct, special, incidental or consequential damages) arising directly or indirectly as a result of improper or inappropriate placement, installation, or use of its products or any other application. To safely install and use Motion products, full consideration of occupants, systems (e.g., the location of fuel lines, navigation systems, brakes lines, electrical, drive train or other systems), air-bags and other back-up, warning or safety equipment is required. Without limiting the foregoing, Motion specifically disclaims any responsibility for the placement, use, or installation of its products not consistent with (i) the original manufacturer’s or governmental or regulatory specifications and recommendations for the environment where the products will be placed, used, or installed, (ii) Motion written product instruction sheets, or (iii) workmanship standards. Setup precautions • Read the installation instructions before connecting the Tablet PC to the power supply. • If you put the Tablet PC in a docking station, place it on a level surface so it does not fall over and damage the unit, the docking station, or other components. • When you move the Tablet PC between environments with very different humidity and/or temperature ranges, allow sufficient time to adjust to the new humidity or temperature. • Do not drop the Tablet PC or subject it to other mechanical shocks as this can cause cosmetic imperfections and/or cause system malfunctions. • Do not apply heavy pressure to the Tablet PC or subject it to strong impact. Excessive pressure or impact can cause damage to Tablet PC components or otherwise cause malfunctions. • Do not place the Tablet PC in an unsteady location. If the Tablet PC is placed in an unsteady location, such as on an unstable stand or incline, the Tablet PC may drop or tip over and cause injury. • Do not place the Tablet PC in direct sunlight or next to equipment that generates heat. This can damage the equipment and components, and may generate heat or fire. • Do not use the Tablet PC AC adapter for other equipment. This can generate heat or fire. In addition, do not use other AC adapters with the Tablet PC. • When using the Tablet PC for long periods of time, rest your eyes for approximately ten to fifteen minutes every hour. Failing to rest your eyes can cause eye strain and other deterioration of eye health. Basic personal safety precautions • Do not attempt to service the Tablet PC nor its components yourself. Perform only those service procedures for which Motion provides special instructions, for example installing a peripheral device. • Turn off the Tablet PC completely to clean it, its components, or chassis, or perform operations requiring similar steps. To d...


Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría