Votos - 3, Puntuación media: 4.7 ( )

Fabricar: Sony Tamaño del archivo: 1.86 mb Nombre del archivo: Idioma del manual:

However, this does not guarantee that all SD memory cards or SDHC memory cards will be compatible with your tablet device. Related Topic Inserting/Removing an SD Memory Card Notes on Using SD Memory Cards File transfer e Your tablet device is equipped with a USB Micro-A/B connector. You can use that to connect your tablet device to a computer or a USB device via USB. 1. Connect a USB device to your tablet device using a designated USB adapter cable SGPUC1 (sold separately) and a commercially available Micro-USB cable. Hint To connect to your computer, use a commercially available Micro-USB cable. Charging the battery via USB is not supported when your tablet device is connected to a computer or a charger. The power supply capacity is 500 mA when your tablet device is connected to a USB device. Related Topic Notes on Connecting Your Tablet Device and a Computer with a USB Cable Copying Data on a Computer to Your Tablet Device File transfer Do not turn off your tablet device while reading and writing data via USB. Do not unplug the USB cable from your tablet device while reading and writing data via USB. Doing so may cause loss of your data. Use a commercially available Micro-USB cable to connect your tablet device and a computer. Related Topic Connecting a USB Device Copying Data on a Computer to Your Tablet Device e Using a designated Sony cradle (SGPDS1, sold separately) for your tablet device lets you charge your tablet device easily or hold it at an easy-to-read angle [Details]. You can select an app to start when your tablet device is set in a cradle. Setting your tablet device in a cradle 1. Slide the foot of the cradle to its upper position. That allows you to plug in or unplug the AC adapter. 2. Plug the AC adapter in to the power cord connector at the bottom of a cradle. 3. Plug the AC adapter in to the AC outlet (wall socket). 4. Align the charge connector of your tablet device with that inside the upper slot of the cradle. 5. 5. 6. Make sure the charge indicator is lit. Note When you hold or unplug the AC adapter, do not touch its terminal area. Pulling the cable of the AC adapter forcedly when unplugging it from the cradle may break the AC adapter or cradle. So, be sure to hold the foot of the cradle. When using the cradle foot at its lower position, run the AC adapter cord through the cutout of the cradle foot to prevent the cradle from falling over. When placing your tablet device in the cradle while the strap attached, make sure the strap does not get caught between the tablet device and the cradle. Hint When you set your tablet device while in use in the cradle, or when you turn on your tablet device in the cradle, you will be prompted to select which app you want to start next time you use the cradle. If you check [None] and [Use by default for this action], you can continue using the app in use, without the app selection screen being displayed for the future. To change the app to start when you set your tablet device in a cradle, tap [ Apps & Widgets] - [ Settings] - [Cradle]. Removing your tablet device from a cradle 1. Lift your tablet device up in a straight line. Related Topic Adjusting the Cradle Angle e You can adjust the cradle angle according to how you use your tablet device by sliding the cradle foot to its upper or lower position. Slide the cradle foot to its lower position to use your tablet device as a photo frame or a table-top clock. Slide the cradle foot to its upper position when operating the touch screen or connecting a keyboard (sold separately). Note When using the cradle foot at its lower position, run the AC adapter cord through the cutout of the cradle foot to prevent the cradle from falling over. Related Topic Using the Tablet Device with the Cradle ) Front 1. Microphone 2. IR data port 3. Ambient light sensor 4. Touch screen 5. Front camera lens Side 1. Notification LED 2. (Power) button 3. Charge indicator [Details] 4. VOL + / - (Volume) buttons The VOL + button has a tactile dot to help you operate your tablet device easier. 5. 5. 6. Built-in speaker (R) Rear 1. Rear camera lens 2. (Headphone) jack 3. USB Micro-A/B connector 4. SD memory card slot 5. SIM card slot 6. SIM card eject hole 7. Built-in speaker (L) 8. Strap hole 9. Charge connector Related Topic Parts and Controls (Cradle) Attaching the Strap to Your Tablet Device About the Home Screen ) 1. Power cord connector 2. Charge connector (inside the upper slot) Related Topic Parts and Controls (Tablet Device) Attaching the Strap to Your Tablet Device s AC adapter AC power cord (mains lead) Strap Quick Start Guide Important Information e Tablet device Make sure you close any connector covers and keep them secure. Clean the cabinet with a soft, dry or slightly moistened cloth with a mild detergent solution. Do not use a detergent solution for cleaning the touch screen. Do not use an abrasive pad, scouring powder, or solvent such as alcohol or benzine, as these may damage the f...

Descargar ahora

Introduzca dos números de la imagen: