Votos - 3, Puntuación media: 4 ( )

Fabricar: Sony Tamaño del archivo: 1.77 mb Nombre del archivo: Idioma del manual:

Do not use your tablet device without the battery pack inserted. About battery discharge After charging, the battery gradually loses its charge even if it is not used. If it is left unused for a long time, the battery charge may be depleted. We recommend recharging the battery before use. If you do not use your tablet device for an extended period of time, fully charge the battery every six months. About battery life Battery life varies depending on usage, settings, and temperatures. About battery deterioration and replacement The capacity of the battery pack gradually declines through repeated recharging and discharging. As a result, the battery life may become short or the battery pack may not perform optimally even when fully charged. If the battery life has become short, replace it with a new battery pack specified by Sony. If the battery pack quickly runs out of power after being fully charged or will no longer accept a charge, replace it with a new one. Related Topic Turning On Your Tablet Device Shutting Down Your Tablet Device Turning the Screen On/Off (Sleep Mode) Notes on Using the AC Adapter Charging the Battery Installing/Removing a Battery Pack Reducing Battery Consumption k To install a battery pack 1. Press the two buttons to open the bottom cover. 2. Orient the contacts as shown, and then insert the battery pack. 3. Close the bottom cover. Note If you insert the battery pack into your tablet device with the touch screen lid opened, the backlight of the LCD screen may be lit for a few seconds, and then go out. This does not indicate a malfunction. To remove a battery pack 1. Press the two buttons to open the bottom cover. 2. 2. Related Topic Turning On Your Tablet Device Shutting Down Your Tablet Device Turning the Screen On/Off (Sleep Mode) Notes on Using the AC Adapter Charging the Battery Notes on Using the Battery Reducing Battery Consumption n Tap Selects an icon or option. Tapping twice quickly allows you to zoom in or out images or other screen items. Tap & hold Opens an option menu. Drag Moves an item or scrolls a page slowly. Flick Scrolls a page quickly. Pinch Zooms in or out. Notes on the Screen Handling the Touch Screen n Notes on handling the touch screen and LCD screen are explained here. Notes on the touch screen Your tablet device uses a capacitive touch screen. Tap the screen directly with your fingertip. Do not scratch it or tap it with sharp objects such as a needle, pen, or fingernails. You cannot operate the touch screen with a stylus. If you tap the touch screen with gloved fingers, the touch screen may operate incorrectly or may not operate at all. Do not operate your tablet device with objects on the touch screen. If the touch screen is touched by objects other than your fingertip, it may not react correctly. Do not put the touch screen close to other electrical devices. Electrostatic discharges can make the touch screen malfunction. If there are water droplets on the touch screen, or if you touch it with wet fingertips, the touch screen may not react correctly. Do not put the touch screen close to water. The touch screen may malfunction in humid conditions or when exposed to water. The touch screen may not react correctly due to noise from the AC power cord (mains lead) during charging the battery. Disconnect the AC power cord (mains lead), and operate your tablet device on the battery only. Notes on the LCD screen Do not leave the LCD screen facing the sun. Be sure to block direct sunlight when using your tablet device near a window. Using your tablet device in low temperature conditions may produce a residual image on the LCD screen. This does not indicate a malfunction. The screen will return to normal when the tablet device returns to normal temperature. The LCD screen becomes warm during operation. This is normal and does not indicate a malfunction. The LCD screen is manufactured using high-precision technology. You may, however, see tiny black points and/or bright points (red, blue, or green) on the LCD screen. This is a normal result of the manufacturing process and does not indicate a malfunction. The LCD screen is made of glass. If the glass is damaged (crack, etc.), do not touch the touch screen nor try to repair it by yourself. Handle the LCD screen carefully as it is vulnerable to dropping or mechanical shock. We cannot guarantee any damages caused by customers due to wrong handling. Do not exert excessive pressure on the LCD screen lid with the lid closed as doing so may scratch or dirty the LCD screen. You may see a difference in color or brightness between upper and lower LCD screens. This is a normal result of the manufacturing process and does not indicate a malfunction. Related Topic How to Use the Touch Screen Handling the Touch Screen n Use a soft, dry or slightly moistened cloth to wipe the surface of the touch screen. Rubbing the surface hard with a dry cloth may damage the screen. Do not ...

Descargar ahora

Introduzca dos números de la imagen: