Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Placas - W3-810 (918.12 kb)
Placas - W3-810 (307.91 kb)
Placas - W3-810 (307.91 kb)
Resumen del manual
Mass(g) Mass loss (%) (=<0.1% Voltage(V) Voltage Retention (%)(=>90 P.2/8 UN Test Data (Model:1UPF476790-2-T1031) 1.Test Item: Vibration (T3) 2.Test Purpose: This test simulates vibration during transport. 3.Test Procedure: Cells and batteries are firmly secured to the platform of the vibration machine without distorting the cells in such a manner as to faithfully transmit the vibration. The vibration shall be a sinusoidal waveform with a logarithmic sweep between 7 Hz and 200 Hz and back to 7 Hz traversed in 15 minutes.This cycle shall be repeated 12 times for a total of 3 hours for each of three mutually perpendicular mounting positions of the cell. One of the directions of vibration must be perpendicular to the terminal face. The logarithmic frequency sweep is as follows: from 7 Hz a peak acceleration of 1gn is maintained until 18 Hz is reached. The amplitude is then maintained at 0.8 mm(1.6 mm total excursion) and thefrequency increased until a peak acceleration of 8gn occurs (approximately 50Hz).A peak acceleration of 8 gn is then maintained until the frequency is increased to 200Hz. SANYO Internal Procedure: As above. 4.Test Requirements: No mass loss(less than 0.1%),no leakage,no venting,no disassembly,no rupture and no fire,and the voltage retention is not less than 90%. 5.Test Date: 2010/12/21 6.Test Data Before test After test Before test After test 1 160.18 160.19 0.01 4.14 4.14 100.0 0 PASS 2 161.36 161.37 0.01 4.14 4.14 100.0 0 PASS 3 159.98 160.00 0.01 4.14 4.14 100.0 0 PASS 4 159.80 159.82 0.01 4.14 4.14 100.0 0 PASS 5 159.89 159.90 0.01 4.13 4.13 100.0 0 PASS 6 159.70 159.72 0.01 4.14 4.14 100.0 0 PASS 7 159.80 159.82 0.01 4.14 4.14 100.0 0 PASS 8 159.34 159.34 0.00 4.12 4.12 100.0 0 PASS Notes: L-Leakage, V-Venting, D-Disassembly, R-Rupture, F-Fire, 0-No leakage, no venting, no disassembly, no rupture & no fire Other event Result Judgement At first cycle,in fully charged states PASS After 50 cycles ending in fully charged states Battery No. Mass(g) Mass loss (%) (=<0.1% Voltage(V) Voltage Retention (%)(=>90 P.3/8 UN Test Data (Model:1UPF476790-2-T1031) 1.Test Item: Shock (T4) 2.Test Purpose: This test simulates possible impacts during transport. 3.Test Procedure: Test cells and batteries shall be secured to the testing machine by means of a rigid mount which will support all mounting surfaces of each test battery. Each cell or battery shall be subjected to a half-sine shock of pack acceleration of 150 g n and pulse duration of 6 milliseconds. Each cell or battery shall be su...
Otros modelos de este manual:Placas - W3-810P (307.91 kb)