Votos - 3, Puntuación media: 3.7
(
)
)
|
Resumen del manual
If a disc is playing press the STOP button to stop playback before you begin the programming steps below. 1.) Move the FUNCTION selector to CD, insert your disc in the player, close the door, and wait until the total track number appears in the display. 2.) Press the CD PROGRAM button once. The PROGRAM Indicator and program memory “00” begin flashing in the display. 3.) Use the / buttons to select the first track to be programmed. (Example: Track 08). 4.) When track number “08”flashes in the display, press the PROGRAM button once again to enter the track “08”in program memory number “01”. Track number “08”disappears and “00”flashes again in the display, indicating that you may now select a track to be entered in program memory number “02”. 5.) Use the or buttons to select the next track to be programmed. When the desired track number appears in the display press the PROGRAM button again to enter that track in the program memory. 6.) Repeat Step 5 until you have entered up to 19 tracks in the program memory. When the memory is full, the “––”flashes in the LCD display 11 PD5201_D022403.p65 11 24/2/2003, 15:05 7.) To begin programmed playback press the PLAY/ PAUSE button. The LCD display will show the first programmed track and playback will begin on that track. The PROGRAM Indicator flashes. After the last programmed track has played the player stops but the programmed tracks remain in the memory. To play the programmed tracks again, press the PROGRAM button and then the PLAY/PAUSE button. To cancel the programmed sequence from memory, press the STOP button at programming mode, open the CD door, or move the FUNCTION selector to the POWER OFF position. Program Repeat Playback You can use the Program and Repeat features together to continuously repeat a programmed sequence of tracks. First, program the desired tracks according to Steps 1 through 7 on pages 11-12. When Programmed Playback begins press the REPEAT button twice to activate the All Tracks Repeat feature. The REPEAT ALL Indicator appears in LCD display and all the tracks in your programmed sequence will be repeated continuously. To cancel Programmed Repeat Playback press the STOP button until both the PROGRAM and REPEAT Indicators go ‘Off’. 12 PD5201_D022403.p65 12 24/2/2003, 15:05 STEREO HEADPHONE JACK Connect a set of stereo headphones (not included) with a 3.5mm mini plug to the Phones jack (located at back panel) for private listening without disturbing others. Before putting on the headphones reduce the VOLUME control to a low level, then put the headphones on and gradually increase the VOLUME control to a comfortable listening level. The built in speakers are automatically disconnected when headphones are connected to the headphone jack. 13 PD5201_D022403.p65 13 24/2/2003, 15:05 CARE AND MAINTENANCE CARE AND MAINTENANCE COMPACT DISC CARE • To remove a disc from its storage case, press down on the center of the case and lift the disc out, holding it carefully by the edges. • Fingerprints and dust should be carefully wiped off the disc’s recorded surface with a soft cloth.Unlike conventional records, compact discs have no grooves to collect dust and microscopic debris, so gently wiping with a soft cloth should remove most particles. Wipe in a straight line from the inside to the outside of the disc. Small dust particles and light stains will have absolutely no effect on reproduction quality. • Clean the disc periodically with a soft, lint-free, dry cloth. Never use detergents or abrasive cleaners to clean the disc. If necessary, use a CD cleaning kit. • Never write on or affix labels to the surface of compact discs. CARE OF THE CABINET If the cabinet becomes dusty wipe it with a soft dry dust cloth. Do not use any wax, polish sprays, or abrasive cleaners on the cabinet. CAUTION Never allow any water or other liquids to get inside the unit while cleaning. 14 PD5201_D022403.p65 14 24/2/2003, 15:05 TROUBLESHOOTING GUIDE Should this unit exhibit a problem, check the following before seeking service. Symptom Possible Cause Solution Noise or sound Station not tuned properly for Retune the AM or FM distorted on AM or FM AM or FM. broadcast station. broadcasts. FM: Telescopic antenna is not Extend FM Telescopic extended. antenna. AM: The bar antenna is not Reposition the unit until positioned correctly. best reception is obtained. AM or FM, no sound. FUNCTION switch is not set to Set FUNCTION switch to AM or FM. AM or FM position. Volume at minimum. Increase Volume. Compact Disc Player CD Player will not play. FUNCTION switch is not set to Set FUNCTION switch to CD. CD. CD is not installed or installed Insert CD with Iabel side incorrectly. up. CD skips while playing. Disc is dirty or scratched. Wipe disc with cloth or use another disc. TO FIND THE LOCATION AND PHONE NUMBER OF YOUR NEAREST SERVICE CENTER PERMITTED TO PERFORM WARRANTY... CALL TOLL FREE: 1-800-695-0098 SERVICE FOR CUSTOMER SERVICE, PLEASE WRITE TO: Emerson Radio Corp. Consumer Affairs Dept...