Votos - 3, Puntuación media: 4.3
(
)
)
|
Resumen del manual
100% compatibility cannot be guaranteed. This is not an indication of any problems with your player. 1.) Slide the CD door OPEN switch to the right to unlock and open the CD door. 2.) Place your CD on the center spindle with the printed label side facing up. Press downward on the disc near the center hole until the disc is fully seated on the spindle. 3.) Close the CD door and connect the headphones to the headphone jack (green color) by pushing the headphone plug the into headphone jack until a ‘click’ sound is heard. 4.) Press the PLAY/PAUSE button to begin playback. The display will briefly show “60 SEC”, then “ – – “ flashes while the player reads the disc. The total tracks and playing time will appear briefly in the display and then the playback will begin on track 1. The display will show the elapsed playing time of the track being played. 5.) Adjust the VOLUME, and BASS BOOST controls as desired. OPEN HD8118_022004.p65 11 20/2/2004, 11:37 6.) Playback will continue until the end of the disc, then the player will stop automatically and the display will again show the total tracks and playing time on the disc. After approximately 30 seconds the power switches ‘Off’ automatically to conserve the batteries and the display goes blank. To stop playback before the disc ends press the STOP button at any time. Press the STOP button after the disc has stopped to shut the power ‘Off’ completely. PAUSE CONTROL To pause momentarily during playback press the PLAY/PAUSE button again. The elapsed time display flashes. The sound stops but the disc continues to spin. Press the PLAY/PAUSE button once more to cancel Pause mode and resume normal playback. The elapsed time display stops flashing. SKIP/SEARCH CONTROLS Press the SKIP FWD or SKIP REV buttons repeatedly during playback to skip to higher or lower numbered tracks. Playback will begin on the selected track. To search within a track at high speed to locate a specific musical passage depress and hold either the SKIP FWD or SKIP REV controls. The player will search rapidly forward or backward as long as the buttons are depressed. The volume is automatically muted during high speed search. Watch the elapsed time display. When the time display reaches the desired point, release the buttons. Normal playback will resume at that point and the volume returns to normal level. 12 HD8118_022004.p65 12 20/2/2004, 11:37 PLAY MODE BUTTON Pressing the MODE button during playback cycles the player through the following four special playback modes: (Repeat 1 Track) ALL (Repeat All Tracks) INTRO SHUFF (Shuffle) Playback. REPEAT PLAYBACK The player can be programmed to continuously repeat a single track or the entire disc automatically. One Track Repeat During playback press the SKIP FWD or SKIP REV buttons to select the track to be repeated, then press the MODE button once. The indicator appears in the display and the selected track will be repeated continuously. Press the STOP button to cancel Repeat 1 playback. All Tracks Repeat Press the PLAY/PAUSE button to begin playback, then press the MODE button twice. The ALL indicator will appear in the display and the entire disc will be repeated continuously. Press the STOP button to cancel All Track Repeat playback. 13 HD8118_022004.p65 13 20/2/2004, 11:37 INTRO (Intro Scan) PLAYBACK The Intro Scan feature plays only the first 10 seconds of each track on the disc. This feature is useful when you are trying to find a particular song but you cannot remember the title. 1.) Load your disc in the player as usual and press the PLAY/PAUSE button to begin playback. 2.) When playback begins press the MODE button 3 times. The INTRO indicator flashes. 3.) Press the PLAY/PAUSE button once more. The INTRO indicator stops flashing and remains ‘On’. The player backs up to the beginning of track 1, plays the first 10 seconds of each track on the disc, and then stops. To cancel Intro Scan playback press the STOP button. SHUFFLE (Random) PLAYBACK When Shuffle playback is selected all the tracks on the disc will be played back in random order. 1.) Load your disc in the player as usual and press the PLAY/PAUSE button to begin playback. 2.) When playback begins press the MODE button 4 times. The SHUFF indicator flashes. 3.) Press the PLAY/PAUSE button once more. The SHUFF indicator stops flashing and remains ‘On’. The player randomly selects a track for playback. After each track has played once the player stops. To cancel Shuffle playback press the STOP button. 14 HD8118_022004.p65 14 20/2/2004, 11:37 PROGRAMMED PLAYBACK You can program up to 20 tracks on a disc to play in any desired order. NOTE: You can program a disc either during playback or in Stop mode. 1.) Press the PROG button once. The PROG indicator and the Program Number ‘01’ appear, and the track number ‘00’ flashes. 2.) Press the SKIP FWD or SKIP REV button to select the first track to be programmed. Example: Track 2. 3.) When the desired track number is flashing in the display press the PRO...