Votos - 2, Puntuación media: 3.5
(
)
)
|
Resumen del manual
11 HD7090_ib072902.p65 11 29/7/2002, 18:33 INTRO SCAN This feature plays only the first 10 seconds of each track on the disc. 1.) At stop mode press the MODE button 3 times. The “INT”indicator appears in the display. 2.) Press PLAY/PAUSE button to begin playback. 3.) The player begins track 1 and plays just the first 10 seconds of each track on the disc. When the first 10 seconds of each track has been played, the player stops. To cancel Intro Scan press the STOP button or press the MODE button until none of the special playback mode indicators appear in the display. RANDOM PLAYBACK Use Random playback to play all the tracks on a disc in a random order selected by the CD player. 1.) At stop mode press the MODE button 4 times. The “RND”indicator appears in the display. 2.) Press PLAY/PAUSE button to begin playback. 3.) The player randomly selects the first track for playback and continues randomly selecting tracks until every track on the disc has been played once. After all tracks have been played the player stops. • To cancel Random playback, press the STOP button, or press the MODE button until no special mode indicators remain in the display. 12 HD7090_ib072902.p65 12 29/7/2002, 18:33 PROGRAMMED PLAYBACK You can program the player to play only the tracks that you want to hear, in the specific order that you want to hear them. Up to a total of 20 tracks can be programmed. You may program certain tracks to play more than once if desired. Note: The player can be programmed when it is in the Stop mode or while playing. 1.) Press the PROG (Program) button. "PRG" indicator and Track No. "00" flash. Program No “01” appears in the display. 2.) Press SKIP or SKIP button until the first track to be programmed appears in the display. Example: Track # 7. 3.) Press the PROG (Program) button again to enter the selected track in the memory. The track indicator returns to a "00" and the Program No. advances to "02". 4.) Repeat Steps 2 and 3 until you have entered up to a total of 20 tracks in the memory. 5.) Press the PLAY/PAUSE button to begin programmed playback. The “PRG”indicator stops flashing and remains in the display. The player will play the tracks you selected in the programmed order. When the last track has played the player stops and the total tracks and playing time appear. • To cancel programmed playback press the STOP button twice. The program mm will also be canceled if the CD Door is opened or if the power is interrupted. 13 HD7090_ib072902.p65 13 29/7/2002, 18:33 ELECTRONIC ANTI-SKIP PROTECTION This CD player is equipped with an automatic 45 second Electronic Anti-Skip Memory that will eliminate virtually all skipping under normal conditions. When you press the PLAY/PAUSE button to begin playback the player immediately begins ss to store 45 seconds of music in a solid state memory that is impervious to shock. The player is always reading the disc 45 seconds ahead of the music you are hearing and storing that information in the memory. If the player is subjected to shock or bumps of less than 45 seconds duration you will not notice them at all. If the bumps last longer than 45 seconds the anti-skip memory may be depleted and the player may skip or stop. When playback begins the Anti-Skip indicator comes on and a series of "bars" appear in the display. When all 5 "bars" appear the Anti-Skip memory contains 45 seconds of music and is "full". If the player is bumped or shaken the "bars" may start to disappear as the memory is depleted. If all 5 "bars" disappear the memory is empty and the player may skip if the bumps continue. When the bumps stop the memory starts to fill up again and all 5 "bars" will reappear. .. 14 HD7090_ib072902.p65 14 29/7/2002, 18:33 15 CARE AND MAINTENANCE CLEANING THE CABINET Wipe with a soft cloth. If the cabinet is very dirty, dampen the cloth with a weak solution of neutral detergent and water, and then wipe clean. CLEANING THE LENS A dirty lens will cause sound skipping and, if the lens is very dirty, the CD may not work. Open the disc cover and clean the lens as follows: DUST OR DRY PARTICLES Using a camera lens brush/blower, blow on the lens several times, then wipe it lightly with the brush to remove dust. Then, blow on the lens once more. FINGERPRINTS To remove fingerprints from the lens, use a cotton swab starting in the middle and working to the outside edge. Use only very light pressure on the lens to avoid forcing it out of alignment. CLEANING THE DISC When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center out. NOTE: Do not use solvents such as benzine, thinner; commercially available cleaners or anti-static spray intended for analog discs. HD7090_ib072902.p65 15 29/7/2002, 18:33 TROUBLESHOOTING GUIDE If you experience a problem with this unit, check the chart below before calling for service. SYMPTOM CAUSE SOLUTION Unit will not turn on. Weak or dead Recharge batteries or batteries. replace batteries. AC adapter not Check AC adapter c...