Votos - 1, Puntuación media: 4
(
)
)
|
Resumen del manual
Usually the words on the screen will change color in time with the music to help you sing along at the proper tempo, even if you do not know the song. Most CD+G Karaoke discs have all of the songs recorded twice, first with music only, and then with music and vocal together. For example, if you purchase a CD+G disc containing four songs, tracks one through four will have the music only without vocals, and tracks five through eight will have the same four songs recorded with music on the left channel and the vocal tracks on the right channel. If you wish to sing along “solo” without any other vocals, you should select tracks one through four (for example). If you wish to sing a “duet” or be part of a group, select tracks five through eight (for example) that contain both the music and vocals. NOTE: Make sure the BALANCE control is set to the center position so you can hear both the vocal and music tracks at an equal level. MICROPHONE FEEDBACK: “Feedback” is a howling or screeching sound that occurs when the microphone comes too close to the speaker(s). To avoid microphone feedback, keep the microphone as far away from the speakers as the microphone cable will allow. If you must bring the microphone close to the speakers, such as when you are changing a disc or adjusting one of the other controls on the front of the unit, set the microphone ON/OFF switch to the OFF position. 12 MKS2420 O/M.it.QXD 6/30/03 10:45 AM Page 13 OPERATION (CONTINUED) PLAYING CASSETTE TAPES OR KARAOKE 1 32 21 Press the POWER button . to turn the unit on; the POWER indicator will light. Slide the FUNCTION switch . to the TAPE position. Adjust the MASTER VOLUME . and TONE . controls as desired. 2 1 4 Press the STOP/EJECT ( ) button to open the Cassette Door and insert a cassette with the open end facing down. 7 8 To advance or rewind the tape rapidly, press either the F.FWD (....) . or REWIND (....) . button. When you reach the desired point, press the PLAY (..) button . to resume normal playback. 13 2 5 6 When the tape reaches the end, the auto-stop mechanism activates, the PLAY (..) button is released and the tape motor shuts off. Press the STOP/EJECT ( ) button to open the Cassette Door and remove the tape. 13 Press the PLAY (..) button to begin playback. To pause playback momentarily, press the PAUSE ( ) button. The tape movement stops but the tape motor is still running. Press the PAUSE ( ) button again to release pause and resume normal playback. KARAOKE: If you would like to sing along with a tape, simply play the tape, insert a microphone and sing along! To stop playback before the tape ends, press the STOP/EJECT ( ) button. The PLAY (..) button is released and the tape motor shuts off. MKS2420 O/M.it.QXD 6/30/03 10:45 AM Page 14 OPERATION (CONTINUED) KARAOKE RECORDING FROM A CD OR CD+G (COMPACT DISC + GRAPHICS) DISC You can record onto a cassette tape from a CD+G karaoke disc or standard CD. CD+G discs combine the recorded music with an additional video track that displays the song lyrics on a television screen. As the song plays, the words to be sung are highlighted in a different color. 1 12 32 Press the STOP/EJECT ( ) button to open the Cassette Door and insert a cassette with the open end facing down. Slide the FUNCTION switch to the CDG position. Insert the microphone into the appropriate jack. Press the PAUSE ( ) button ., then press the RECORD button . (the PLAY button will be automatically depressed). 4 7 Adjust the AUTO VOCAL control for the best balance between playback and microphone levels. IMPORTANT: This feature only works with multiplex CDs. Turn the microphone on using the Microphone ON/OFF switch. Sing or talk into the microphone(s) and both the CD/CD+G and the microphone(s) will be recorded onto the cassette. 1 2 1 6 1 25 Adjust the MIC1/MIC2 VOLUME controls . as desired. Increasing this control will increase the volume of the respective microphone. Adjust the ECHO control . to add an echo effect to your voice. The ECHO control . is variable so add as much or as little reverb as desired. Press the PAUSE button . to release pause and then press the CD Play/Pause (... to start CD/CD+G playback. If connected to a TV and using a CD+G disc, the image and lyrics will appear on the TV. 8 When you are finished recording, press the STOP/EJECT ( ) button to stop the tape. NOTES: • Refer to SAFEGUARD AGAINST ACCIDENTAL ERASURE section (page 15) if the RECORD button cannot be pressed. • Keep the microphone away from the unit to avoid feedback. 14 MKS2420 O/M.it.QXD 6/30/03 10:45 AM Page 15 CARE AND MAINTENANCE SAFEGUARD AGAINST ACCIDENTAL ERASURE When a new recording is made, any program material previously recorded is automatically erased and only the new recording remains. To safeguard valuable recordings from being erased accidentally, the cassette and the deck are equipped with a special device. On the back of the cassette there is an erase prevention tab on each side. To prevent accidental erasing, break out these ta...