Votos - 3, Puntuación media: 4.7
(
)
)
|
Resumen del manual
ANTI-SHOCK starts flashing. • If ANTI-SKIP key is pressed, then disappears. TO PLAY FROM STOP MODE • Press PLAY/PAUSE button, then the display changes to 01 00:00 and starts play. • When the memory is full, ANTI-SHOCK stops flashing. TO STOP Press STOP key and the TOC is displayed. TO PAUSE Press PLAY/PAUSE button, then pause on/off alternately. When the player is paused the time display is flashes. flashing. 7 REPEAT/PLAY MODES Every time the MODE button is pressed, the corresponding mode appears in the display window. MODE MODE MODE MODE REPEAT ALL INTRO RANDOM REPEAT 1NORMAL During playback When this is showing on the LCD display. The current track X 1 on the disc will be repeated. MODE When this is showing on the During playback LCD display. All tracks on the disc will be repeated. X 2 MODE NOTE: In normal mode none of the above symbols show in the display. NORMAL PLAYBACK Plays the entire disc. A indicator appears on the display when the batteries need to be changed. 8 INTRO PLAY 1. Press MODE button three times, then INT is displayed. 2. Press PLAY / PAUSE button, and starts INTRO play from track no. 01. 3. Select INTRO mode during play, INT will flash. • Press PLAY/PAUSE button, INT stops flashing and INTRO play from track no. 01. • Press >>I to hear the INTRO to the next track. • Press I<<, to hear the INTRO of the previous track PROGRAM PLAY • Programs can be set in the STOP mode or normal play mode. This allows selected tracks on the disc to be played in any order desired. To set the program play 1. Press the PROG button, then PRG and starts flash. 2. Press I<< or >>I to select the desired track. 3. When desired track is displayed, press PROG button to register. Then track No. display change to 00 again. 4. Repeat step 2 and 3 to program the order of more tracks. Up to 20 tracks can be programmed into memory. To complete programming and start play Press PLAY/PAUSE button, then PRG stops flash and starts play soon. To clear programming • Set the first program track to 00 and press the PLAY/PAUSE (>II) button. • Open the door. • Power Off 9 10 11 Press I<< lightly and repeatedly. Press >>I lightly and repeatedly. Locating a Particular Point in a track Keep I<< depressed Keep >>I depressed Low level audio will be heard during the search process to assist in locating the correct point in the track. Locating a Particular track MAINTENANCE Cleaning the Case Wipe with a soft cloth. If the case is very dirty, dampen the cloth with a weak solution of neutral detergent and water, and then wipe clean. Cleaning the Lens A dirty lens will cause sound skipping and, if the lens is very dirty, the CD may not work. Open the disc cover and clean the lens as described below. • Dust or Dry Particles Using a camera lens brush/blower, blow on the lens couple times, then wipe it lightly with the brush to remove dust. Then, blow on the lens once more. • Fingerprints If the lens cannot be cleaned by using a brush/blower, use a dry cotton swab starting in the middle and working to the outside edge. To go back to the beginning of the current or a previous track. To go to the beginning of following tracks To search backwards within a track at high speed. To search forward within a track at high speed RANDOM PLAY Enables all the tracks on a disc to be played in a Random (Shuffle) sequence. 1. Press MODE button four times, then RND is displayed. 2. Press PLAY/PAUSE button, then the track No. is selected at random and starts play. 3. To select RANDOM mode during play, press the MODE button until RND starts to flash. • Press PLAY/PAUSE button or I<< or >>I, and begin RANDOM play. SKIP AND SEARCH FUNCTION USING ANTI-SHOCK AND SKIP FREE PROTECTION FEATURE Note the " " indicator appears on display as being empty when the player is first activated. It immediately begins to store sound data in the memory bank, the indicator appears to be " " when the data buffer is full. When the laser loses tracking due to mechanical shock, the data stream into the memory is interrupted but the data output from the memory buffer continues, so the sound is not interrupted. As the data is read from the memory, the indicator changes from " " to " ". Once the laser locks again on the CD track, the data stream is fed to the memory and joined to the previous data (see indicator changes) at higher speed, this provides higher level shock protection than the traditional one. CAUTION If the unit is subject to excessive and continuous repeated shock, it will cause the sound skip. Also note the " " indicator will appear empty. NOTES • When the "ANTI-SHOCK" is operating, the battery consumption is higher because the disc rotates faster than normal and also the memory circuitry is activated. • When the digital anti-skip function is switched "ON" or "OFF", the sound will be interrupted. This is a normal occurrence. • Remember that conditions such as dirty, scratched or warped discs may cause skipping or noise, thereby affecting performance of the "ANTI-SHOCK" syst...