8 7. HD Radio Operation Entering Mode Select Menu Leave and re-enter the SAT mode to enter the Mode Select Menu. This can be accomplished by pressing the “BAND” button a few times until XM is displayed on the screen. Once in the Mode Select Menu, turn the rotary knob in the top right hand corner to scroll through available sources. Once “HD RADIO” is displayed, press the “FWD>>” button to select the mode. If you are currently in “SAT” mode you will need to press the “>I SEEK” button instead of “FWD>>” to select “HD RADIO” mode. Tune Up Turn the rotary tune knob to the right to manually tune up. Seek Up Press the “>I SEEK” button to seek up to next available station. Tune Down Turn the rotary tune knob to the left to manually tune down. Seek Down Press the “I>” button. Turn the tune knob in the upper right corner to select the preset location (1-18) where you wish to store the preset. when the preset position is displayed (for example PRE1) press “I>” button to enter the preset menu. use the tune knob in the upper right corner to scroll through the stored preset stations. when the desired preset is displayed, press the “>I SEEK” button to select it. Exit menus Press the “<I” button to seek up to the next available station. 8. Selecting AUX Input Entering Mode Select Menu Leave and re-enter the SAT Mode to enter the Mode Select Menu. This can be accomplished by pressing the “BAND” button a few times until XM is displayed on the screen. Once in the Mode Select Menu, turn the rotary knob in the top right hand corner to scroll through available sources. Once “AUX” is displayed, press the “FWD>>” button to select the displayed mode. If you are currently in “SAT” mode you will need to press the “>I SEEK” button instead of “FWD>>” to select “AUX” mode. Selecting between AUX1 / AUX2 If you are currently inAUX1 orAUX2 mode turn the rotary knob to enter the mode select menu .Once AUX1 or AUX 2 is displayed on the screen press the “FWD>>” button to select. 9. Selecting Factory Installed Sat (if equipped) Leave and re-enter the SAT Mode to enter the Mode Select Menu. This can be accomplished by pressing the “BAND” button a few times until XM is displayed on the screen. Once in the Mode Menu, turn the rotary knob in the top right hand corner to scroll through available sources. Once “SAT” is displayed, press the “FWD>>” button to select that mode. Factory Sat Operation Refer to the owners’ manual that came with your vehicle. 10. iPod Operation (Navigation) Entering Mode Select Menu Leave and re-enter the SAT mode to enter the Mode Select Menu. This can be accomplished by pressing the “FM” button then pressing the “XM” button, XM will be displayed on the screen. Once in the Mode Select Menu, turn the rotary tune knob in the top right hand corner to scroll through available sources. Once “IPOD” is displayed, press the “>” button on the screen to select the displayed mode. If you are currently in “SAT” mode you will need to press the “>I SEEK” button instead of the “>” button to select “IPOD” mode. Next Track Turn the rotary tune knob to the right one notch to advance to the next track. Previous Track Turn the rotary tune knob to the left one notch to move back to the previous track. Fast Forward Press “>I SEEK” to fast forward the song that is playing. Press “>I SEEK” again, while in same menu, to resume play. Rewind Press “>I SEEK” to rewind the song that is playing. Press 10 “>I SEEK” again to resume play. Menu Down / Select Press the “>” button on the screen to make a selection or move down one folder in the “BROWSE”menu. Menu Up Press the “<” button on the screen to move up one folder or exit the menu. Steering Wheel Controls Press the “^” button to advance to the next track. Press the “Ў” button to return to the previous track. Press the “>I” button to enter the browse menu. Press the “^” or “Ў” buttons while in the browse menu to scroll through the menus. Press the “>I” button wh...
)
