Votos - 5, Puntuación media: 3.4
(
)
)
|
Resumen del manual
See your TV owner’s manual for details. Or, keep changing channels at the TV until you see the DVD logo or DVD playback on the TV screen. (The DVD Player power must be on.) . Set the Stereo to the correct channel or “source” mode. . Do not connect the DVD Player’s AUDIO OUT jacks to the PHONO IN jack of your Stereo. . Depending on your connection, you may need to purchase additional cables. . You only need one audio connection and one video connection. . If you do not connect the DVD Player to a Dolby Digital-compatible Stereo, set DOLBY DIGITAL to OFF on the DVD Player. Details are on pages 11 and 39. Playing a Disc when the settings are wrong could distort the sound or damage the speakers. Once you determine the best option, find your choice on pages 9-13. Follow the specific steps for the hookup you chose. MDV410/430 2/7/02 11:18 AM Page 9 Hookups (cont’d) 9 Connecting the DVD Player to a TV only TV has AUDIO (red and white) and VIDEO (yellow) IN jacks VIDEO IN LEFT AUDIO IN RIGHT AUDIO IN R L AUDIO OUTCOAXIAL VIDEO OUT Cb S-VIDEO OUT Y Cr VIDEO L/MONO AUDIO R in DIGITAL AUDIO OUT PCM/MULTICHANNEL COMPONENT VIDEO OUT 2 Back of TV (example only) 1 1 1 Connect the supplied red and white audio cables to the red and white AUDIO OUT jacks on the DVD Player and to the red and white AUDIO IN jacks on the TV, matching the cable colors to the jack colors. 2 2 Connect the supplied yellow video cable to the VIDEO OUT jack on the DVD Player and to the VIDEO IN jack on the TV. 3 3 Connect the TV’s power cord to a power outlet. Turn on the TV and set it to the Audio/Video In channel, which also may be referred to as A/V In or Auxiliary In. This channel usually is near channel 00. See your TV owner’s manual for details. 4 4 Connect the DVD Player’s power cord to a power outlet. Press the POWER y yy button to turn on the DVD Player. You should see the DVD logo on the TV screen. If you do not, check your connections and make sure the TV is set to the correct Audio/Video In channel. MDV410/430 2/7/02 11:18 AM Page 10 10 Hookups (cont’d) Connecting the DVD Player to a TV only TV has AUDIO (red and white) and S-VIDEO IN jacks VIDEO L/MONO in AUDIO R S-VIDEO IN LEFT AUDIO IN RIGHT AUDIO IN R L AUDIO OUTCOAXIAL VIDEO OUT Cb S-VIDEO OUT Y Cr DIGITAL AUDIO OUT PCM/MULTICHANNEL COMPONENT VIDEO OUT 1 2 Back of TV (example only) 1 1 Connect the supplied red and white audio cables to the red and white AUDIO OUT jacks on the DVD Player and to the red and white AUDIO IN jacks on the TV, matching the cable colors to the jack colors. 2 2 Connect an S-Video cable (not supplied) to the S-VIDEO OUT jack on the DVD Player and to the S-VIDEO IN jack on the TV. 3 3 Connect the TV’s power cord to a power outlet. Turn on the TV and set it to the S-VIDEO IN channel. This channel may be near channel 00. See your TV owner’s manual for details. 4 4 Connect the DVD Player’s power cord to a power outlet. Press the POWER y yy button to turn on the DVD Player. You should see the DVD logo on the TV screen. If you do not, check your connections and make sure the TV is on the correct S-Video In channel. MDV410/430 2/7/02 11:18 AM Page 11 Hookups (cont’d) 11 Connecting to a TV and a Stereo that is Dolby Digital or MPEG compatible Some Discs are recorded in a 5.1 channel Dolby Digital Surround format. These Discs will sound best if you connect the DVD Player to a Stereo that has Dolby Digital. . Set DOLBY DIGITAL to ON if you connect the Player to a Dolby Digital-compatible Stereo. Details are on page 39. . If you play an MPEG audio disc and connect the Player to an MPEG-compatible Stereo, set MPEG to ON. Details are on page 39. . Select 5.1 channel Dolby Digital Surround sound if available in the DVD’s menu. . This DVD Player does not support the Digital Theater System (DTS). DVD Player VIDEO L/MONO AUDIO R VIDEO IN Back of TV (example only) COAXIAL DIGITAL AUDIO IN Back of Stereo (example only) 1 2 1 1 Connect a coaxial digital audio cable (not supplied) to the COAXIAL jack on the DVD Player and to the COAXIAL DIGITAL AUDIO IN jack on the Stereo. 2 2 Connect the supplied yellow video cable to the yellow VIDEO OUT jack on the DVD Player and to the VIDEO IN jack on the TV. You may use S-Video or Component Video (MDV430 only) if S-Video or Component Video is available on your TV. See pages 10 and 12 for these optional video connections. Remember, you only need one video connection between the TV and the DVD Player. 3 3 Plug in the Stereo’s power cord. Turn on the Stereo and select the Auxiliary IN station. During Disc playback, you will adjust the volume at the Stereo. See your Stereo owner’s manual for details. 4 4 Plug in the TV’s power cord. Turn on the TV and set it to the correct Video In channel. During Audio CD playback, you may check the Disc status on your TV screen. During DVD playback, you will watch the program on the TV. See your TV owner’s manual for details. 5 5 Connect the DVD Player’s power cord to a power outlet. Press the POWER y yy butto...