Iniciar sesión:
Votos - 1, Puntuación media: 3 ( )

Manual de usuario Lenoxx Electronics, modelo CD-916

Fabricar: Lenoxx Electronics
Tamaño del archivo: 408.35 kb
Nombre del archivo: cb6f7db0-8025-44ee-8c03-afc0375c064a.pdf
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


Touching the headphones wire during FM play may affect reception of weak stations. When using the LINE OUT jack to connect with home stereo, the line out cable can also be used as FM antenna. To have better FM reception, it is also recommended to insert the headphones and adjust its position, for use as the FM antenna. NOTE 2: Slide the MONO/STEREO switch to MONO can reduce the noise and improve the effect of the FM reception, because stereo broadcasts are weaker by nature. NOTE 3: This set uses an analog (rotary) tuner with a digital display. The digital display is very useful when locating your favorite station and also assists you to pinpoint the exact tuning frequency. This set does not have radio memory presets. 9 IB-CD916(CDR79AD-60J8)-WM-E-010805 IB-CD916(CDR79AD-60J8)-WM-E-010805.pmd 10 2/23/2005, 11:49 AM A dirty lens will cause sound skipping. If the lens is very dirty, the player may not work. We suggest using a special cleaning disk (not included) available in most music and Hi-Fi stores. However, if you do not have one, you may use a cotton swab very slightly dampened with alcohol to clean the lens. Cleaning the cabinet Wipe with a soft cloth. If the cabinet is very dirty, dampen (not dripping wet) the cloth with a weak solution of soapy water, and then wipe clean. Cleaning the Discs • Fingerprints should be carefully wiped from the surface of disc with a soft cloth. Unlike conventional records, compact discs have no grooves to collect dust and microscopic dirt, so gently wiping them with a soft cloth should remove most particles. Wipe in a straight motion from the center to the edge. Handling Compact Discs • Dirty, scratched or warped discs may cause skipping or noise. • Handle the disc only by the edges. To keep clean, do not touch its surface. • Discs should be stored in their cases after use to avoid scratches. • Do not expose discs to direct sunlight, high humidity, high temperatures, or dust, etc. Prolonged exposure to extreme temperatures can warp the disc (such as leaving the discs in your car during summertime). • Do not stick or write anything on either side of disc. Sharp writing instruments, or the inks used in some felt-tip pens, may damage its surface. To Remove the Disc Open the CD DOOR by sliding the DOOR OPEN switch, hold the disc by the edge while slightly pressing on the center spindle as illustrated, then lift it from the edge to release and remove. NOTE: Always press the STOP/OFF button and • Never use thinner, benzine, record wait for the disc to stop rotating before cleaner or antistatic spray on a compact disc. Such chemicals can damage its plastic surface. sliding the DOOR remove the disc. OPEN button to 10 IB-CD916(CDR79AD-60J8)-WM-E-010805 IB-CD916(CDR79AD-60J8)-WM-E-010805.pmd 11 2/23/2005, 11:49 AM S Do not take the set apart. The laser beam used in the set may harm your eyes. Refer servicing to qualified service personnel only. Do not insert pins or coins, clips, or any objects inside the set. This set is equipped with a safety device which automatically turns the laser beam off when the disc door is opened. Do not drop the set or subject it to strong shocks. Doing so could result in damage. Do not place the set in locations where the temperature is high, or in humid or dusty locations, or locations with long heavy vibrations, or tilted surfaces. The set’s cabinet may warp or the set may be damaged if it is placed in direct sunlight, near heaters (where the temperature is 1400F/600C or higher) or in cars with the windows closed. In the summer, the temperature may get as high as 2120F/1000C or more. Use the set within a temperature range of 410F/50C to 950F/350C. Use ONLY the DC 4.5V 600mA AC ADAPTOR with polarity , others may damage your set. Disconnect the ADAPTOR from the wall outlet when the set is not to be used for an extended period of time (3 days or more). When cleaning your set, use a soft dry cloth. Do not use solvents or commercially available cleaners, as they may damage or discolor the finish. Do not wear headphones while operating a motor vehicle. This could create a traffic hazard and is illegal in many areas. Do not use this set when bicycling or running. The headphones supplied with your set provide superb stereo listening while allowing you to hear some outside sounds when listening at normally low volume levels. Listening at extremely high volume levels minimizes the intrusion of outside noise/ sounds. In the interest of safety, it is strongly advised against the use while engaging in activities where the exclusion of external sounds (whistles, horns, sirens, traffic, etc.). Also loud volume can hurt your ears. If you notice that the sound has become weak or distorted or if tracks do not change, this is an indication that your batteries are weak. Replace both batteries at the same time (see Using With Batteries). Your CD-916 is identified by a serial number located in the BATTERY COMPARTMENT. Record this number in the space provided below. Model ...

Otros modelos de este manual:
Jugadores - CD-916 (408.35 kb)

Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría