Votos - 4, Puntuación media: 3.3
(
)
)
|
Resumen del manual
Then, it will choose a new disc randomly, excluding the discs already played, and play continuously. The sequence differs each time. In the full random play mode Once the changer has played the maximum 250 tracks, it will select a new random sequence and will continue playing. To repeat the same track over and over To repeat the programmed tracks 1 .Select the desired track using the program play procedure on page 12. 2. Press REPEAT to display “O ” ■ 3. Press ►. To cancel repeat mode REPEAT Press REPEAT again. The “ O ” indicator will go out. Skip function To skip discs Use this function to skip discs when selecting a disc which you wish to listen to. DISC SKIP You can use this function in stop, sequential play, one disc random play and disc grouping play modes. disc skip Press either DISC SKIP (- or +) until I..........—1—3 you reach the desired disc. Skips backwards to the preceding disc. +: Skips forward to next disc. Note: The changer skips over empty slots. Note • This function does not work in the full disc random play mode or during program play. • If you attempt to use this function during single disc play, the changer will cancel single disc play. For your reference If you press the DISC SKIP buttons intermittently, the slot Nos change slowly. If you hold the buttons down, the changer fastskips through numbers. To skip tracks Use this function to skip tracks when selecting a track which you wish to listen to. | | Press either or until you Ъ reach the desired track. : You can skip backward. ►►I : You can skip forward. /— ► /_/ DISC o n • n n U "N /_/ •/_/ /_/ TRACK MIN SEC Track number at the playing position In the sequential/single disc/disc grouping/program play mode You can skip only within the current disc. In the program play mode, you can skip from one track to another in the programmed sequence. : You can skip to the beginning of the track being played. If you press this button again quickly, you can skip to the beginning of the previous track. Remember that in a backward skip, the current track is included in the count. ►H : You can skip as many tracks as the number of times you press the button. In the random play mode : You can skip to the beginning of the current track. ►H : You can skip to the beginning of a next track in the random order the changer has selected. You can also skip tracks when the changer is in the stop mode (except during random play) or pause mode. i6 ID scan function SL-MC400 only Time mode selection SL-MC300 only This function is convenient to use when searching for a desired track. The function will search from the beginning of the track for a loud section, and will play 10 seconds of the track centering around that point. The order of scanning is the same as for play mode. ID SCAN Press ID SCAN. ID scan will start. Illuminates When the desired track has been found: Press ►. The changer will play the track from the beginning. To cancel ID scan id scan Press ID SCAN while this function is in operation. The “ID” indicator will go out. The changer will continue to play from the track being played. (Only available from the remove control.) The various time information of the current disc can be displayed. TIME MODE O Ö O O 1/A 2/B 3/0 GROUP ENTEF O O O O Ö Ö Ô Ô ÔÔÔÔ DfâC ENTER O O O O O h=mB> Ö ö oo/ oo 6 o CtD cb [In the play or pause mode] Press TIME MODE. The information will change (as described below) each time you press the button. ► © Track number and elapsed play time of the current track Total remaining time on the disc 1 I ► / DISC _ c n • 1 1 1 1 • 1 f r 1 1 MIN SEC Track number and remaining time of the current track ----© Total elapsed play time on the disc In all play modes When track number 21 or greater is playing, display < shows In the program/random play mode The displayed information will alternate between displays © and © each time the button is pressed. When you stop playing and then start play again, the display will return to display ©. Concerning compact discs n COMPACT log® With this changer, you can only play compact discs having this mark: DIGITAL AUDIO Handling precautions To open the compact disc case, gently press the sides of the top and pull up. To remove the disc from the case, press the center holder and lift the disc, holding by the edges. 7 Center holder (sJjù \ To return the disc to the case, insert the disc with the label facing up and press downward at the center. Hold compact discs by the edges so as not to soil the surface with fingerprints. Fingerprints, dirt and scratches can cause skipping and distortion. Jj /fjjf / (\gj|/\ \ Technical specifications ■ AUDIO No. of channels Frequency response Output voltage Dynamic range S/N Total harmonic distortion Wow and flutter DA converter Output impedance Load impedance ■ PICKUP Wavelength ■ GENERAL Power consumption Power supply Di...