Votos - 4, Puntuación media: 4.3
(
)
)
|
Resumen del manual
In step 2: Connect the stereo headphones to the [E] jack. (Plug in firmly.) .Play stops automatically when all the tracks have been played. .If the unit has been connected to the car audio system, adjust the volume level between 4 and 6 on the unit, then adjust the volume level on the system. For your reference: “)” indication This indication appears for about 30 seconds if [1/;] is pressed when no disc is loaded in the unit or if the disc is not properly secured. 3 4 1 6 2 LR NOR RESUME RANDOM VOLUME 5 46 OPEN HOLD OPR OFF 5 S-XBS / Label must face upward. Track number in play Elapsed playing time of each track Plug type: 3.5 mm (1/8 in.) stereo Close the lid. Operation Button Display/reference To pause play Press during play. / Press again to restart play. S-XBS To stop play Stop mode Press during play. OPR OFF S-XBS Total number of tracks Total playing time To turn off the unit Off mode Press during stop mode. OPR OFF Skip forward/ backward (skip function) Press during play. (Press [:] twice to skip to the beginning of the previous track.) Press and hold during play. Backward Forward .During program play (page 4), these buttons are used to skip forward or back through the programmed sequence of tracks. .During random play (page 4), the skip buttons cannot be used to skip back to tracks that were played previously in the random sequence. .During program play, random play or 1-track repeat play (page 4), search operation is limited to the current track only. Rapid forward/ backward (search function) Anti-Skip System This system deals with skipping in a variety of ways: .An anti-skip mechanism prevents skipping caused when play speed changes due to swinging of the unit. .A recovery system immediately returns the laser pickup to its original position if it is knocked off the track by a strong shock. .The 40-second anti-skip memory fills in interruptions caused by bumps and vibrations. The anti-skip system works automatically while the system is on and cannot be canceled. When bumps continue repeatedly The elapsed playing time disappears and sound is interrupted. Note! S-XBS .The anti-skip memory compresses digital signals. .The anti-skip memory holds up to 100 seconds of data when playing MP3 files created with a compression rate of 128kbps. (see pages 4 to 6). “*” indication This indication appears for about 10 minutes when the cover is opened. (However, the indication does not appear when the unit is powered off.) Removing discs 1 Press [.,OPR OFF] to stop play and disc rotation. 2 Slide [OPEN 1] to open the lid. 3 Press [PUSH] to release the disc. Do not stop the disc by hand or try to remove it before it stops rotating. This can damage CDs. PUSH PUSH Note! Never insert foreign objects into the unit. Auto power off function If the unit is left in stop mode for approximately 10 minutes, the unit powers itself off automatically in order to prevent the batteries from running down. (If no disc is loaded in the unit it powers itself off in about 30 seconds.) Note on CD-R and CD-RW This unit can play CD-DA format audio CD-R and CD-RW that have been finalized§ upon completion of recording. It may not be able to play some CD-R or CD-RW due to the condition of the recording. §Finalizing is a process that enables CD-R/CD-RW players to play audio CD-R and CD-RW. Other Play Methods The letters such as A in the various illustrations refer to the descriptions in the “Location of Controls” section (see page 2). . To program the same track in the se- Skip play quence more than once Repeat function . After step 3, press [MEMORY/RECALL] desired number of The disc plays from the specified track through to the end, then times. Press during play or stop mode. play stops automatically. . If “'” is displayed Preparation: Put unit in stop mode. . No more tracks can be programmed. . To confirm the contents of the program RANDOM D . Press [MEMORY/RECALL] while the disc is playing. (The NOR RESUME N number of the programmed tracks appear on the display in sequence.) . To delete the entire programmed se-The setting switches as shown below each time you 2 Select the desired track. quence press the button. . Press [.,OPR OFF]. 1-track repeat (1 `)( ----------------] G Random play One track is repeated. | v| All-track repeat (`) | All the tracks on the disc are repeated. | | 1 NOR RESUME RANDOM N v Program play Up to 20 tracks can be entered in the programmed sequence. Preparation: Put unit in stop mode. 1 2 Select the desired track. 3 Register in sequence. (The indication “M” and the programmed sequence appear on the display.) 4 Repeat steps 2 and 3 to program all the desired tracks. 5 2 For your reference: .It is also possible to press [9] while the unit is in stop mode to change the first track to be played. (All tracks are played eventually, regardless of which is played first.) .Program play is not possible in the random mode. Resume play This function allows you to listen from the beginning of the track where play stopped because...