Votos - 3, Puntuación media: 4.7
(
)
)
|
Resumen del manual
Using dry cell batteries Using the AC adaptor Battery indicator (not included) (not included) Use only the recommended AC adaptor. Use of other Insert two “LR6, AA, UM-3” alkaline bat- AC adaptors can damage the unit. Battery indicator teries. S-XBS TRAIN ALL RANDOM SORRY 1 M C Removing batteries Push up on the battery in the direction indicated by the arrow. Then lift it out. If the battery lid comes loose Slide the lid back into place horizontally. 1 + - 2 3 Note! The dry cell batteries should be changed when the unit is off. Using rechargeable batteries (not included) .If rechargeable batteries are to be used, rechargeable batteries manufactured by Panasonic are recommended. .This unit cannot recharge batteries. The battery indicator will not function correctly when using rechargeable batteries. To order the optional AC adaptor RP-AC46 contact 1800- 332-5368 or web site (Connect the AC adaptor. DC IN jack (DC IN 4.5 V K) Back panel of the unit Household AC outlet AC adaptor Conserving power To save power when the unit is not to be used for a long time, unplug the AC adaptor from the household AC outlet. Reprogram tracks if necessary before use. Note! Turn the unit off before connecting or disconnecting the AC adaptor. If the unit malfunctions or freezes during use, disconnect the power source (the AC adaptor or batteries). Re-connect the power source and continue operation. This indicator flashes when the batteries are almost out of power. Power is cut off completely a short while later. Replace batteries with new ones. Note! The length of time the unit will continue to operate between when the battery indicator starts flashing and when the power is cut off differs depending on the type of batteries used. Using the car adaptor (not included) Use only the recommended car adaptor. Use of other car adaptors can damage the unit. Be sure to obtain the car adaptor (SH-CDC9) available as an optional accessory. CAUTION: Use only car adaptor, Model: SH-CDC9 manufactured by Matsushita Electric Industrial Co.,Ltd. Location of Controls I A D E F H B C C GG NM .... KJ L Back panel of the unit A Display B Memory/recall button (MEMORY/RECALL) C Headphone volume control buttons (VOL i,j) D EQ button (EQ) E Mode button (MODE) F Play/pause button (1;) G Skip/search buttons (:, 96 , 5) H Stop/operation off button (.,OPR OFF) I Hold switch (HOLD) J Headphone jack (E) K CD release button (PUSH) L Open switch (OPEN 1) M Hole for car mounting base N DC IN jack (DC IN 4.5 V K) HOLD Function HOLD HOLD mode This function causes the unit to ignore short, accidental button presses. (The disc lid can still be opened and closed.) The HOLD function prevents the following: .The unit is powered on accidentally when not in use, causing the batteries to run down. .A button is accidentally pressed during play, interrupting the operation. To use the HOLD function Set [HOLD] to the HOLD position. “(” indication When the unit is in HOLD mode, pressing any button causes the indication “(” to appear on the display. When the unit is powered off The “(” indication appears only when [1;] is pressed. Before operating the buttons Be sure to move [HOLD] to release the unit from the HOLD mode. Sequential Play Basic Play 23 1 5 4 LR OPEN HOLD VOL VOL S-XBS VOL TRAIN ALL RANDOM SORRY 1 M C S-XBS VOL TRAIN ALL RANDOM SORRY 1 M C OPROFF Label must face upward. Track number in play Elapsed playing time of each track Plug type: 3.5 mm (1/8 in.) stereo Increase Decrease Close the lid. Follow steps 1–5. In step 2: Connect the stereo headphones to the headphone jack [E].(Plug in firmly.) In step 5: The volume range is 0-25. Press and hold to change the volume successively. The volume changes when pressed while the level is displayed. If any other display is shown, it changes to show the current level. (The volume returns to 10 when you disconnect the power source.) .Play stops automatically when all the tracks have been played. .If the unit has been connected to the car audio system, set this unit’s volume to 10, then adjust the volume level on the system. For your reference: “)” indication This indication appears for about 30 seconds if [1;] is pressed when no disc is loaded in the unit or if the disc is not properly secured. “*” indication This indication appears for about 10 minutes when the cover is opened. (However, the indication does not ap- Button Display/referenceOperation To pause play To stop play To turn off the unit Skip forward/ backward (skip function) Rapid forward/ backward (search function) Off mode Stop mode .During program play (page 4), these buttons are used to skip forward or backward through the programmed sequence of tracks. .You cannot skip to tracks that have been played in random or random repeat play (page 4). .During program play, 1-track repeat play, random play and random repeat play (page 4), search operation is limited to the current track only. Press during play. Press during play. Press during stop...
Otros modelos de este manual:Jugadores - SL-SX293 (245.17 kb)