Votos - 3, Puntuación media: 3.3
(
)
)
|
Fotos y especificaciones Hyundai H-CD7011 |
Resumen del manual
In case of breakdown please contact servicing personnel. • This product will be automatically powered off if input voltage is less than required one, which cannot be solved by restarting. In this case, please check if the input voltage meets the requirement. • Remove power supply including AC adaptor and batteries when the player will be left unused for a long time. • AC adaptor will power the player automatically when the adaptor and dry batteries are used at the same time. • Don’t use AC adaptor that is supplied not by our company because it may cause damage. • Do not connect the player to the power supply if you have just moved it from a cold to a warm environment. 3 This can result in condensation inside the system and cause serious damage to the machine. Wait around two hours to allow it to reach room temperature. Function • Battery Energy Saving Function: Video Output is automatically shut off when playing VCD disc with batteries. You can keep pressing ESP button for 3 seconds to output video. • Super Energy saving Design for Playing MP3 • 4 Audio Output Modes • Compatible with MP3/VCD/DVCD/CD/CD-R/CD-RW • Long time anti-shock function: - MP3 120 seconds - CD 60 seconds - VCD 0 seconds • Wireless Remote Control Function • Wired Control Function • LCD with blue backlight • PBC Play Function • Channels R/L and stereo changeable • Repeat Mode Selectable • Dynamic zoom function • External-Battery box function 4 Accessories Please check if the following accessories are accompanied with: 1. Unit 1 pc 2. AC Adaptor 1 pc 3. A/V Cable 1 pc 4. Wireless remote control 1 pc 5. Earphones 1 pc 6. Manual 1 pc 7. Wired control 1 pc 8. Extra-Battery block 1 pc 9. Rechargeable battery 2 pcs Preparation The unit is shipped with a dummy CD “transit card” inside the CD compartment. The purpose of it is to prevent the laser from moving during shipment of the product. This card must be removed before using the player. Slide the OPEN switch to the right to open the upper cover, remove the transit card from the player and discard it. 5 1. How To Connect Connect one terminal of Audio cable with “PHONE” jack on the unit and the other with Jack of CD/AUX INPUT or Audio Jack of TV set. When playing VCD, connect one terminal of Video cable with “VIDEO” Jack on the unit and the other with “VIDEO” Jack of TV set or one of any type of monitor. If wired control is needed, connect the terminals of wired control with PHONE” jack on the unit, then connect the terminal of earphone with “PHONE” jack on the wired control. If wired control with LCD is needed, connect the terminals of wired control with “PHONE” Jack, then connect the terminal of earphone with “PHONE” jack on the wired control. 6 2. Power supply The player needs to be powered by 2 Ni-MH batteries or AC adaptor. 3. Inserting the batteries into the unit • Open the upper cover of the player, press the cover of battery compartment marking “OPEN”, push it up and open the cover of battery compartment. • Insert 2 Ni-MH batteries according to the polarity being marked on battery cover or in battery compartment. • Close the cover of battery compartment. Note: • If the batteries cannot power the player, please replace 2 new batteries or recharge them (if the batteries are rechargeable) for several hours to get enough power. Cautions of dry battery • Please adopt heavy-duty alkaline battery. • DON’T recharge a dry battery. • DON’T use rechargeable battery and dry battery at the same time. • DON’T use a new battery and a used one at the same time. • DON’T use different type of batteries at the same time. 7 • Remove all the batteries when the player will be left unused for a long time. • In case of leakage of batteries, clean battery compartment before inserting new batteries. • Always observe local environmental laws on waste batteries. 4. How to recharge rechargeable batteries • Insert rechargeable batteries into battery compartment. • Connect AC adapter with the product. • Place a disc in the player and press PLAY/PAUSE button to playback the disc. • When the disc is playing, keep press the PLAY/PAUSE button over 3 second, “C ON” will show on LCD. It means beginning to recharge batteries. • If you don’t want to enjoy the disc while recharge batteries, you can press STOP button to stop playing. • If you want to stop recharge batteries, keep pressing PLAY/PAUSE button for 3 seconds again, “C OFF” will show on LCD, the unit will stop recharging. • The player will turn power off automatically when recharging batteries over 12 hours. • Don’t recharge dry batteries! 8 5. How to use AC adaptor The player has AC adaptor, which is for indoor use. Please connect AC adaptor with the player and then put AC adaptor in AC socket to use AC adaptor. The output power and polarity of the AC adaptor is shown as below: Output: 4.5V DC, 600mA Positive + — Negative Note: • If batteries and AC adaptor are both used, the player wi...