Votos - 4, Puntuación media: 4.3
(
)
)
|
Resumen del manual
– When Auto scroll is set to off and the disc/ track name is changed, the disc/track name does not scroll. P/M (Play Mode) • LOCAL-ON/OFF (Local seek mode) (page 13) – Select “ON” to only tune into stations with stronger signals. • MONO-ON/OFF (Monaural mode) (page 13) – Select “ON” to hear FM stereo broadcast in monaural. Select “OFF” to return to normal mode. • IF AUTO/WIDE (page 13) 1 Press (MENU). To set A.SCRL, press (MENU) during CD/ MD Playback. 2 Press either side of (DISC/PRESET) repeatedly until the desired item appears. 3 Press the (+) side of (SEEK) to select the desired setting (Example: ON or OFF). 4 Press (ENTER). After the mode setting is completed, the display returns to normal play mode. Note The displayed item will differ depending on the source. Tip You can easily switch among categories (“SET,” “DSPL,” “P/M,” and “EDIT”) by pressing either side of (DISC/PRESET) for 2 seconds. Selecting the sound position — My Best sound Position (MBP) When you drive without passengers, you can enjoy the most comfortable sound environment with “My Best sound Position.” “My Best sound Position” has two presets, which adjust the sound level of balance and fader. You can select one very easily with the MBP button. Display Balance Level Fader Level window Right Left Front Rear MBP-A – 4dB 0 0 – 4dB MBP-B 0 – 4dB 0 – 4dB MBP-OFF 0 0 0 0 Press (MBP) repeatedly for the desired listening position. The mode of “My Best sound Position” is shown in the display in order of the table. After one second, the display goes back to the normal playback mode. If you want to adjust the sound level of balance and fader more precisely, you can do it using the (SOUND) button (see “Adjusting the sound characteristics” on page 17). Notes • When the BAL (balance) or FAD (fader) in “Adjusting the sound characteristics” (page 17) is adjusted, the MBP setting returns to OFF. • When MBP is set to OFF, the BAL and FAD setting is activated. Boosting the bass sound — D-bass You can enjoy a clear and powerful bass sound. The D-bass function boosts the low frequency signal and high frequency signal with a sharper curve than conventional bass boost. You can hear the bass line more clearly even while the vocal volume remains the same. You can emphasize and adjust the bass sound easily with the D-BASS button. 0dB D.BASS-3 D.BASS-2 D.BASS-1 D.BASS-3 D.BASS-2 D.BASS-1 Level Frequency (Hz) Adjusting the bass curve Press (D-BASS) repeatedly to select the desired bass curve. As the D-BASS number increases so does the effect. Note The bass sound may distort at same volume. If the bass sound distorts, select less effective bass curve. TV/Video (optional) You can control an optional TV tuner and TV monitor with this unit. Watching the TV 1 Press (SOURCE) repeatedly until “TV” or “AUX” appears. 2 Press (MODE) repeatedly to select the desired TV band. TV1 t TV2 t AUX t TV1 Watching a video 1 Press (SOURCE) repeatedly until “TV” or “AUX” appears. 2 Press (MODE) repeatedly to select “AUX.” Play the video. Note The indication automatically switches to “VIDEO 1” soon after “AUX” is displayed. Storing TV channels automatically The unit selects the TV channels with the strongest signals and assigns them to number buttons in order of their frequency. Caution If tuning in a station while driving, use AUTO MEM (Automatic Memory) to prevent accidents. 1 Select “TV” (see “Watching the TV” on page 20). 2 Press (MENU), then press either side of (DISC/PRESET) repeatedly until “AUTO MEM” appears. 3 Press (ENTER). The unit assigns TV channels to the number buttons in order of their frequency. A beep sounds when the setting is stored. Notes • The unit does not assign TV channels with weak signals. If only a few TV channels with strong signals can be received, some number buttons will remain empty. • When a preset number is indicated on the display, the unit starts assigning TV channels to buttons from the one currently displayed. Storing only the desired TV channels You can assign up to 12 channels (6 each for TV1 and TV2) to the number buttons in the order of your choice. 1 Select “TV” (see “Watching the TV” on page 20). 2 Press either side of (SEEK) to tune in the TV channel you want to assign to each number button. 3 Press and hold the desired number button ((1) to (6)) until you hear a small beep. The number button indication and “MEM” appear in the display. Note If you try to assign another channel to the same number button, the previously assigned channel will be erased. Storing the TV channel names Follow the steps in “Storing station names” (page 14). Displaying the TV or radio station names Press (LIST) during TV or radio reception. Example: When receiving the FM1 band FM 1 2 3 4 5 6 W W W C B K 1 1 B T 0 0 S U 2 SWR K I S 1 S L 1.9 .7 2 1 3 1 Preset numbers 2 Stored station names 3 Frequencies* * If the name of a station is not assigned to number buttons, the frequency of that station will be displayed instead. To turn off the list display on the TV monitor,...