Iniciar sesión:
Votos - 5, Puntuación media: 4.8 ( )

Manual de usuario Edirol, modelo R-09HR

Fabricar: Edirol
Tamaño del archivo: 7.42 mb
Nombre del archivo: R-09HR_OM.pdf
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


“Playing back songs” (p. 52) Starts recording Stops recording Play 41 Recording The R-09HR can use a dynamic microphone or a condenser microphone, such as the type that are connected to the microphone jack of a PC. fig.conmic-LR-e.eps_80 • If a cable is connected to the [LINE IN Jack], then the input from the [MIC Input Jack] is ignored. Do not connect anything to the [LINE IN Jack]. • To prevent feedback when recording with a microphone, do not use speakers. • To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections. fig.power-onoff-e.eps_80 1. Turn on power to the R-09HR. Turn on power to the R-09HR. See “Turning power on/off” (p. 20) 2. Set the sampling frequency. “Configuring recording” (p. 34) fig.open-set-e.eps_80 1. Show the

. Press the [MENU Button] to show the . fig.recoedersetting-e.eps_80 2. Select “Recorder Setup.” Use the [PLAY Button ] and [STOP Button ] to select “Recorder Setup,” then press the [REC Button]. Using external microphones Stereo microphone L R Hold down Show Move the cursor up or down Enter Recording Recording Use the [PREV button ] and [NEXT button ] to change the Sample Rate value. Sampling frequency values 44.1 kHz 48 kHz 88.2 kHz 96 kHz Changes the value 3. Set the recording mode. “Configuring recording” (p. 34) 1. Select “Rec Mode.” Use the [PLAY Button ] and [STOP Button the cursor to the Rec Mode line. ] to move 2. Select the recording mode. Use the [PREV button ] and [NEXT button the Rec Mode value. ] to change Recording mode MP3 64 kbps MP3 96 kbps MP3 128 kbps MP3 160 kbps MP3 192 kbps MP3 224 kbps MP3 320 kbps WAV 16 bit WAV 24 bit Move the cursor up or down Change the value MP3 cannot be selected when the sampling frequency is 88.2 kHz or 96 kHz. 4. Press the [MENU Button] twice to return to the
. Press twice Show
Recording Recording Set the type of microphone being used. Dynamic microphone Switch OFF the [PLUG-IN POWER Switch] on the back.Condenser microphone powered by self-contained battery Plug-in powered condenser microphone Switch ON the [PLUG-IN POWER Switch] on the back. Set the [PLUG-IN POWER Switch] to the type of microphone connected to the [MIC Input Jack]. • When connecting a dynamic microphone or a battery-powered microphone, be sure to use the [PLUG-IN POWER Switch] to set to off. Damage may result if the wrong setting is used. • If a cable is connected to the [LINE IN Jack], then no sound is input through the [MIC Input Jack]. Dynamic microphone The durable dynamic microphone is suitable for vocal or instrumental recordings. It does not require a power supply. Condenser microphone The sensitive condenser microphone is suitable for recording quiet sounds such as live instrumentals or meetings. It requires a power supply from either batteries or plug-in power. Stereo Use the to set the external microphone type to stereo (p. 101). Monaural Use the to set the external microphone type to monaural (p. 101). Only the L channel is recorded if a monaural microphone is used when the external microphone type is set to stereo. When set to monaural, the same sound (stereo) is recorded to the L and R channels. 6. Connect the microphone. Connect a microphone to the [MIC Input Jack] on the R-09HR. To monitor the sound while recording, connect headphones to the [HEADPHONE jack]. Feedback may occur when external speakers are connected, so please do not use speakers. 7. Adjust the input level. Adjust the volume for the recorded sound. Follow the procedures in “Adjusting recording levels” (p. 45) to adjust the level. Recording Recording Press the [REC Button]. Press the [REC Button] while in recording-standby mode (while the [REC Indicator] is blinking). The [REC Indicator] lights up, and recording begins. • Recording can also be started by pressing the [PLAY/PAUSE Button ]. • If you slide the HOLD switch to the ON position after starting a recording, the recording will not stop nor will the recording level change even if a button is accidentally pressed. • When the [SPLIT Button] is pressed during recording, the file is split at that location and saved (p. 51). • If the [Input Level Button] is used during recording, the input level will change. Be careful to not mistakenly use the [Input Level Button]. • Power cannot be turned off during recording. First stop the recording, then turn off the power. 9. Press the [STOP Button ] to stop recording. The [REC Indicator] goes out. Press the [PLAY/PAUSE Button ] to pause. Press the [PLAY/PAUSE Button ] again to cancel the pause and restart recording. The display shows the recorded song. • The song name is automatically created, e.g., R09_0001.WAV. The four-digit number forming the latter part of the name is arrived at by adding one to highest-numbered existing song. • When File Name is set to “Date,” the date and time of the reco...

Otros modelos de este manual:
Jugadores - R-09HR (7.42 mb)
Instrumentos Musicales - R-09HR (7.42 mb)

Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría