Votos - 2, Puntuación media: 5
(
)
)
|
Resumen del manual
Search function Keep depressed during play. Operation Button To pause play To stop play To turn off the unit (Off mode) • During Random Play, the skip buttons cannot be used to skip back to tracks that were played previously in the random sequence. Press during play. Press again to restart play. If passed for 2 minutes, the power will automatically shut off. Display/Reference or Blinks Press the 3/8 button again to restart play (Resume Play). The current track will be played from the beginning (see “Resume Play”). If stopped for 45 seconds, the power will automatically shut off. When all the music is played, the MD player automatically stops. or Display/Reference Repeat Play and Random Play You can select either Repeat Play or Random Play. In Repeat Play, you can repeat all the tracks, or an individual track, as many times as you like. In Random Play, you can play all the tracks in random order. Selecting Repeat Play and Random Play in Stop mode In Stop mode, press the P.MODE button. Each time you press the button, the play mode changes as follows: P1 = P = RND = P1 RND = P RND = Original display = (back to the beginning) P1 : Repeats 1 track. P : Repeats all the tracks. RND : Random play P1 RND : Repeats one track randomly selected. P RND : Repeats all the tracks in random order. After selecting one of the above modes, press the 3/8 button. To exit Repeat Play or Random Play, stop the MD and then press the P.MODE button until the display returns to its original setting. Repeat Play during Playback During Normal Play: Each time you press the P.MODE button, the play mode changes as follows: P1 = P = Original display = (back to the beginning) Select “P1” to repeatedly play the current track. Select “P” to repeat all the tracks. During Random Play: Each time you press the P.MODE button, the play mode changes as follows: P1 RND = P RND = Original display = (back to the beginning) Select “P1 RND” to repeatedly play a randomly selected track. Select “P RND” to repeat all the tracks in random order. To exit Repeat Play or Random Play, stop the MD and then press the P.MODE button until the display returns to its original setting. Selecting the Operational Options of Remote Control Notes: • Since the insertion direction of the car audio cassette adaptor is limited, be sure that it can be inserted into the cassette slot of your car audio system. • Depending on the vehicle used, noise may occur. In this case, it is recommended to connect a noise filter (available on the market) between the remote control and the car audio cassette adaptor. • If your car audio system is equipped with a LINE IN or AUX IN jack, you can connect the output of the remote control to the jack using a stereo mini plug signal cord (not supplied). In this case, you do not need the optional car audio cassette adaptor. Troubleshooting Guide Before requesting service for this minidisc player, check the chart below for a possible cause of the problem you are experiencing. Some simple checks, or a minor adjustment on your part, may eliminate the problem and restore proper operation. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, refer to the directory of Authorized Service Centers (enclosed with this minidisc player), or consult your dealer for instructions. Problem Does not operate. Cannot play the MD. Tracks on MD do not play in order, starting with the first track. Cannot hear music—too noisy. TV picture is distorted. Radio reception is noisy. Power is not turned on. Charging indicator does not light during charging. E Check this Is the MD loaded? If unloaded, “No Disc” will appear on the display. • Is the HOLD switch released? • Is the battery low? • Is there moisture condensation on the lens? (Wait for about an hour and then try again.) • Is the Repeat Play or Random Play selected? • You stopped or turned off the power while playing. It changed to Resume Play. • Is the headphone plug inserted all the way? • Is the plug dirty? (Wipe away dirt on the plug.) • Is music recorded on the MD? If not, “BLANK” will appear on the display. • Is the unit too near a TV or tuner? (If the TV or tuner is connected to a simple indoor antenna, connect it to an outdoor antenna.) • With both HOLD switches activated, the battery was changed during playback. (Release both HOLD switches and try to operate again.) • Is the charger too hot? (If so, disconnect the AC adaptor and leave the charger for a while.) Maintenance Unit: Wipe the unit and remote control with a soft cloth. Remove stubborn dirt using a cloth which has been dipped in water (or soapy water) and wrung out. Then wipe them dry. • If you intend to use a chemically treated cleaning cloth, read its directions first. • Do not use alcohol or paint thinners. MDs: If the MD cartridge is dirty wipe it with a damp cloth and then wipe dry. When storing MDs, avoid locations which are • Exposed to direct sunlight. • Susceptible to high levels o...