• Do not bend discs. Storage • After removing a disc from the unit, be sure to put it back in its case. • Do not expose discs to direct sunlight, high temperatures from a heater, etc., high humidity or dust. Cleaning discs Before loading a disc, wipe off any dust, dirt or fingerprints with a soft, dry cloth. Discs should be cleaned by wiping radially, from the center to edge. Never use thinner, benzine, record cleaner or antistatic spray. • Removing the disc from its storage case and replacing it Press the center and lift out. Press to secure the disc. • Handling Incorrect • Cleaning Correct Incorrect PLAYING COMPACT DISC 2 314 34 RANDOM MUTING EQ 1 2 3 4 5 6 7 8 9 0 VOL REMOTE CONTROL UNIT TAPE TUNER/ BANDCD USB REPEAT SLEEP MENU/ FM MODE STOP/ ENTER PROGRAM/ PRESET STANDBY/ ON / 1 Press PUSH OPEN/CLOSE to open the disc door. 2 Load a disc with the label side facing up and close the disc door. • 8-cm CD can be played on the unit without an adapter. The following indications are displayed. Track number CD: 001 00:00 Total 12 56:03 Total number of tracks Track number MP3: Total playing time WMA 001 00:00 Total 141 Total number of tracks 3 Press CD to start playback. You can start playback by pressing CD on the remote control unit. CD: CD DA Elapsed playing time 001 00:13 (Track information scroll) Track number Sampling frequency MP3: WMA 00:13001 MP 3 44 KHZ 128 KBPS Bit rate (File information scroll) File format Elapsed playing time 4 Adjust the volume. Notes: • When an MP3 or WMA file is loaded, it may take more than 30 seconds to be read in, depending on the amount of information compiled in the disc. • The following indication may be displayed when the disc is loaded upside down. Reload the disc correctly. CD SCANNED NO DISC • Mistracking may occur if a strong shock is applied to the unit or if it is used in a place subject to vibrations (e.g. in a car travelling on a rough road). To stop playback Press STOP/ENTER. You can press STOP/ENTER on the remote control unit to stop playback. STOP/ STOP/ ENTER ENTER Main unit Remote Caution: Stop playback before opening the disc door. Check that the disc has completely stopped rotating before unloading the disc. To pause playback Press CD during playback. To resume playback, press the button again. CD CD Main unit Remote Selecting a desired track directly Use the number buttons on the remote control unit. Example: • To select track 8, press 8. • When the total number of tracks is double-digits: To select track 21, press 0 , 2 , then 1. • When the total number of tracks is triple-digits: To select track 21, press 0 , 0 , 2 , then 1. To select track 115, press 0 , 1 , 1 , then 5. Search – locating a desired position on the disc (audio CD only) Press and hold 4 or . during playback. Monitor the sound and release the button when the desired position is located. Main unit Remote PLAYING USB Playing a USB Operate in the order shown 42 1 2 24 RANDOM MUTING EQ 1 2 3 4 5 6 7 8 9 0 VOL REMOTE CONTROL UNIT TAPE TUNER/ BANDCD USB REPEAT SLEEP MENU/ FM MODE STOP/ ENTER PROGRAM/ PRESET STANDBY/ ON / 1 Open the USB terminal cover. 2 Insert a USB. • Press the USB 6 button to start play. 3 The track number is displayed. Elapsed playing time Track number 00:02 MP 3 44 KHZ 128 KBPS USB MY HEART WILL GO ON.MP3 001 4 Adjust the sound. Skipping • To skip back to the previous track During playback, press 4 once to return to the beginning of the current track, press twice to skip back to the beginning of the previous track. • To skip to the next track During playback, press . to skip to the beginning of the next track. Main unit Remote To stop play During playback, press the 7 button to stop play. STOP/ STOP/ ENTER ENTER Main unit Remote • To stop a USB temporarily Press the USB PLAY/PAUSE 6 button to stop play temporarily. When pressed again, play resumes from the point where it was paused. USB USB Main unit Remote IMPORTANT: • Always set volume to “VOLUME MIN” when connecting or disconnecting the other equipment. • Connect the USB Memory or DAP directly to the top cabinet of the unit. Connecting via a USB hub may result in malfunction. • USB Memory and DAPs compatible with the USB mass storage class specifications are connectable. • Some DAPs are not compatible with the unit. • Copyrighted tracks (WMA-DRM* tracks) cannot be played on the unit. • Coded or encrypted tracks in a special method cannot be played on the unit. * DRM (Digital Rights Management): Any of several technical methods used to control or restrict the use of digital media content on electronic devices with such technologies installed. Repeat/Random playback (for CD mode or USB mode) REPEAT REPEAT Repeat playback Press REPEAT during playback. REPEAT/ PRESET REPEAT Main unit Remote Each time you press the button, the repeat mode changes in the following order: In case of an audio CD or USB mode: Repeat playback of a single track 1 Repeat playback of all tracks on the disc ALL Repeat playback is canceled. RAN DOM RANDOM ...