Votos - 4, Puntuación media: 4
(
)
)
|
Resumen del manual
In such a case, enter at least one charac-ter for the disc name or the track names. You can trans- fer information once you record the TOC. Operation of the MiniDisc for stamping 6 Load a MiniDisc for stamping. 7 Press the ENTER/SYNC button. l The unit will finish recording the character infor-mation and enter the stop mode. **05-ADVANCED FEATURES 02.07.2000, 10:04 AM35 35 Advanced features**05-ADVANCED FEATURES Editing a recorded To erase tracks one at a time To erase all of the tracks at once 1 Start playing the track to be erased, and press the 06 0606060606 button. 2 Press the EDIT button to select “ERASE”. 3 Press the ENTER/SYNC button. l To cancel the operation, press the • n /:OFF button. 4 Press the ENTER/SYNC button again. l The track will be erased. 5 To erase other tracks, repeat steps 1 - 4. 1 Whilst in the stop mode, press the EDIT button to select “ALL ERASE”. 2 Press the ENTER/SYNC button. l To cancel the operation, press the • n /:OFF button. 3 Press the ENTER/SYNC button again. l All of the tracks will be erased. Caution: Once a track has been erased, it can not be recovered. Check the track number before erasing it. 36 02.07.2000, 10:04 AM Advanced features **05-ADVANCED FEATURES To divide a track To combine tracks 1 Start playing the track to be divided into two. Press the 06 0606060606 button at the point where you want to divide the track. 2 Press the EDIT button to select “DIVIDE”. 3 Press the ENTER/SYNC button. l To cancel the operation, press the • n /:OFF button. 4 Press the ENTER/SYNC button again. l The track will be divided into two tracks, and the unit will pause at the beginning of the second of the two new tracks. 1 Start playing the last of the two tracks to be combined, and press the 06 0606060606 button. 2 Press the EDIT button to select “COMBINE”. 3 Press the ENTER/SYNC button. l To cancel the operation, press the • n /:OFF button. 4 Press the ENTER/SYNC button again. l The two tracks will be combined, and the unit will be paused at the beginning of the combined track. 36 37 02.07.2000, 10:04 AM 37 Advanced features**05-ADVANCED FEATURES Editing a recorded MiniDisc To move a track 1 Play the track to be moved, and press the 06 0606060606 button. 2 Press the EDIT button to select “MOVE”. 3 Press the ENTER/SYNC button. l To cancel the operation, press the • n /:OFF button. 4 Press the 5 55555 or 4 44444 button to select the direction. 5 Press the ENTER/SYNC button again. l The track will be moved, and the unit will be paused at the beginning of the track. 38 When a track has a name before dividing: . The two new tracks will have the same name. However, in the TOC FULL condition, the second track may not be named. Total number of tracks that can be divided: . Each disc can hold up to 255 tracks. However, even if the number of assigned tracks has not reached 254, it might not be possible to make any further divisions of tracks. To combine two non-adjacent tracks: . First, put the two tracks next to each other in the order you want using the MOVE function. Then combine them using the COMBINE function. When one or both tracks to be combined have a name: . The first track name will be used. However, when the first track does not have a name, the second track name will be used. In the following cases, tracks may not be combined. . Digital recorded track and analogue recorded track. . Long play recorded track and stereo recorded track. . Tracks whose recording time is less than 12 seconds. 02.07.2000, 10:04 AM Advanced features **05-ADVANCED FEATURES Changing default Beep sound You can eliminate the confirmation sound that beeps when you press a button. Auto play You can make the unit not play automatically when you insert a playback-only MiniDisc or an accidental erasure protected MiniDisc. Auto power save When the unit is used in a place exposed to much vibration, sound skipping can be decreased by cancelling the auto power save function. (Battery will drain faster.) What is auto power save function? Auto power save function automatically adjusts the sound skip memory storage to be from 5 to10 seconds depending on playback conditions, this saves battery power. If the MiniDisc unit is used in areas of much vibration it may be necessary to fix the sound skip memory to 10 seconds “Psave OFF” this will improve performance under difficult conditions but uses more power. (When the AC/car adaptor is used the 10 second mode is always used) Whilst in the stop mode ... 1 With a MiniDisc inserted, press the MODE button for 2 seconds or more. “SET UP” will appear. . When you release the button, “BEEP ON” or “BEEP OFF” will appear. 2 Press the 5 or 4 button to display the menu. Then press the MODE button to switch items. [BEEP ON] [ AUTO Psave] [ A-PLAY ON] [BEEP ON] (*) [BEEP OFF] [A-PLAY ON] (*) [ A-PLAY OFF] [ AUTO Psave] (*) [Psave OFF] Beep sound Auto play Auto power save (*) indicates default setting. 3 Press the • n /:OFF button. 38 39 02.07.2000, 10:04 AM 39 References **06-REFERENCES...