Votos - 2, Puntuación media: 3.5 ( )

Fabricar: DCS Tamaño del archivo: 827.36 kb Nombre del archivo: Idioma del manual:

Read the installation, operating and maintenance instructions thoroughly before installing, using or servicing this equipment. WARNING! If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury or death. Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. DANGER If You Smell Gas: 1. Do not try to light any appliance. 2. Do not touch any electrical switch; do not use any phone in your building. 3. Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions. 4. If you cannot reach your gas supplier, call the fire department. 5. Installation and service must be performed by a qualified installer, service agency or the gas supplier. WARNING! To reduce the risk of injury to persons in the event of a cooktop grease fire, observe the following: Turn burner off first. Smother flames with a close-fitting lid, cookie sheet, metal tray, baking soda or use a dry chemical or foam- type fire extinguisher. Be careful to prevent burns. If the flames do not go out immediately evacuate and call the fire department. Never pick up a flaming pan - You may be burned. DO NOT USE WATER ON GREASE FIRES, including wet dishcloths or towels - a violent steam explosion will result. Use an extinguisher ONLY if: 1. You know you have a Class ABC extinguisher, and you already know how to operate it. 2. The fire is small and contained in the area where it started. 3. The fire department is being called. 4. You can fight the fire with your back to an exit. WARNING! Do not place items of interest to children on racks or appliance. Children could be seriously injured if they should climb onto or into the appliance to reach these items. WARNING! Do not place combustible material (paper, cloth, plastic, etc.) on the rack. PLEASE RETAIN THIS MANUAL FOR FUTURE REFERENCE. 1 TABLE OF CONTENTS SPECIFICATIONS 3 WALL MOUNT LOW BACKGUARD INSTALLATION 3 WALL MOUNT FULL BACKGUARD INSTALLATION 4-5 SPECIFICATIONS B A 8-3/4 " 12 " B A 1-5/16 " 1-5/16 " MODEL A BGS-1230 BGS-3030 B BGS-1236 BGS-3036 BGS-1248 BGS-3048 29-7/8" -- - - - 2 - - - 2 2 1 RACK (16-5/8") QTY. RACK (13-5/8") QTY. 29-7/8" 35-7/8" 35-7/8" 47-7/8" 47-7/8" 10-1/8" 10-1/8" 28-1/8" 28-1/8" 10-1/8" 28-1/8" WALL MOUNT LOW BACKGUARD INSTALLATION 1. Locate and level range per installation instructions. 2. After unpacking all backguard system parts, locate the Back Section 1/8” above and centered over the Island Trim attached to the range.* Secure Back Section to wall with the appropriate fasteners (not supplied)(fig. 01). *After 1/8” is located, slots in back section may be used to adjust spacing between range island trim and backguard for a flush fit. 3. Secure Front Section of backguard to Back Section with #8 self-tapping sheet metal screws supplied (fig. 02). Back Section Island Trim Slots to choose desired spacing between Range Island Trim and Backguard. 16”f...

Descargar ahora

Introduzca dos números de la imagen: