Votos - 2, Puntuación media: 3.5
(
)
)
|
Fotos y especificaciones Electrolux EHL 6645 X |
Resumen del manual
However, they do not impair the function of the hob. Hob Frame Important! Do not put vinegar, lemon-juice or scale removers on the 1 hob frame, otherwise dull spots will appear. 1. Wipe the frame with a damp cloth and a little washing up liquid. 2. Soften dried dirt with a wet cloth. Then wipe off and rub dry. What to do if ... Rectifying faults It is possible that faults have been caused by a minor error, which you can correct yourself with the help of the following instructions. Do not attempt any further repairs if the following instructions do not help in each specific case. Warning! Repairs to the appliance are only to be carried out by approved service engineers. Improperly effected repairs may result in considerable risk to the user. If your appliance needs repairing, please contact your specialist dealer or customer service. What to do when … .... the cooking zone does not function? Check whether – the fuses in the house installation (fuse box) are intact. If the fuses switch off, or blow, several times, please call an authorized electrical technician. – the corresponding cooking zone is switched ON and the desired degree of heat has been set. – for cooking zones with several rings, whether the heating circle has been switched On. If it is desired to contact the customer services because of incorrect operation, then the visit of the customer service technician during the guarantee time will not be free of charge. Installation Instructions Important! The new appliance may only be installed and connected by qualified personnel. Please observe this instruction, otherwise the warranty will not cover any damage that may occur. Technical Data Appliance dimensions Width Depth Height 572 mm 502 mm 49 mm Worktop cut-out dimensions Width Depth Corner radius 560 mm 490 mm R5 Power consumption Front left dual-ring cooking zone o 120/210 mm Rear left cooking zone o 145 mm Rear right multipurpose cooking zone o 170/265 mm Front right cooking zone o 180 mm 1000/2200 W 1200 W 1500/2400 W 1800 W Heating element voltage 230 V ~50 Hz Total load 7,6 kW Regulations, Standards, Directives This appliance meets the following standards: • EN 60 335-1 and EN 60 335-2-6 relating to the safety of electrical appliances for household use and similar purposes and • EN 60350, or DIN 44546 / 44547 / 44548 relating to the operating features of electric cookers, hobs, ovens, and grills for household use. • EN 55014-2 / VDE 0875 part 14-2 • EN 55014 / VDE 0875 part 14/1999-10 • EN 61000-3-2 / VDE 0838 part 2 • EN 61000-3-3 / VDE 0838 part 3 relating to basic requirements for electro-magnetic compatibility protection (EMC). ; This appliance complies with the following EU Directives: • 93/68/EWG CE Labelling Directive • 73/23/EWG dated 19.02.1973 (Low Voltage Directive) including Amending Directive 90/683/EWG • 89/336/EWG dated 03./05.1989 (EMC Directive including Amending Directive 92/31/EWG). 1 Safety Instructions for the Installer • A device must be provided in the electrical installation which allows the appliance to be disconnected from the mains at all poles with a contact opening width of at least 3 mm. Suitable isolation devices include line protecting cut-outs, fuses (screw type fuses are to be removed from the holder), earth leakage trips and contactors. • In respect of fire protection, this appliance corresponds to type Y (EN 60 335-2-6). Only this type of appliance may be installed with a high cupboard or wall on one side. • Drawers may not be fitted underneath the hob. • The installation must guarantee shock protection. • The kitchen unit in which the appliance is fitted must satisfy the stability requirements of DIN 68930. • For protection against moisture, all cut surfaces are to be sealed with a suitable sealant. • On tiled work surfaces, the joints in the area where the hob sits must be completely filled with grout. • On natural, artificial stone, or ceramic tops, the snap action springs must be bonded in place with a suitable artificial resin or mixed adhesive. • Ensure that the seal is correctly seated in the frame and that it is seated against the work surface without leaving any gaps. Additional silicon sealant must not be applied; this will make removal more difficult when servicing. • The hob must be pressed out from below when removed. Electrical Connection • Before connection, check whether the nominal voltage of the appliance, the voltage stamped on the nameplate, is in agreement with the available supply voltage and the nominal voltage of the combination appliance. The nameplate is situated on the under-covering of the cooking surface. • Bring the connection plug of the cooking unit together with the corresponding parts of the built-in stove or switchbox and connect them tightly. Press the connection cable into the side of the oven door. • Following connection to the mains supply, all cooking zones must be switched on, at the maximum setting, one after the other for approx. 30 seconds to check that they functi...
Otros modelos de este manual:Placa - EHL 6645X (1 mb)