Votos - 2, Puntuación media: 4.5 ( )

Fabricar: Candy Tamaño del archivo: 1.33 mb Nombre del archivo: Idioma del manual:

the cooking of domestic food. * While the front door is open do not put a heavy object on it, and allow children to sit on it. I In Models with grill; Grilling must not be undertaken with the oven door closed. ' Half open the oven door and use knob heat shield when in use. * If the oven door is accidentally closed during grilling or if you fail to open the oven door fully when you are using the grill, your appliance will be damaged (*} and you will invalidate your guarantee. (*) If the oven door is not opened, the surfaces of the appliance and the interior of the grill compartment will get very hot resulting in heat damage to the door, the control panel, control knobs, side panels and the grill tray. QThe mains lead must not come in contact with any part of the appliance during operation. * Always use oven gloves when g ^ removing the grill rack and dishes from inside the oven when in use. * During operation of this appliance the door and outer surfaces will get hot. Take care not to touch hot surfaces during use. *The surfaces of the inox model appliances which are nearer to the burners may change colour because of the excessive heat in the course of time. a*lmmediately switch off the appliance from the mains if a crack is detected on the ceramic glass surface. a* Always switch off the appliance from the mains when the appliance is not in use, before cleaning or in the unlikely event of a product failure becoming apparent. □ *Before your appliance is connected to the gas supply, check the ensure that the gas category and pressure specifications shown In the data plate corresponds with your gas supply. If necessary call authorized service for adjusting to gas category. * Please change the plastics hose just before its changing time as stoted. 2 Part 2: Installation and preparation Installation of gas cookers ^Before your appliance is connected to the gas supply, check the ensure that the gas category and pressure specifications shown in the data plate corresponds with your gas supply. If necessary call authorized service for adjusting to gas category. *This appliance shall be installed in accordance with the regulations in force and only used in a well ventilated space. Read the Instructions before installing or using this appliances. In the interest of safety this appliances must be installed and/or serviced by a competent person as stated in the gas safety regulations current editions. * Please refer to the data plate for details about gas supply and pressures. * The appliance must not be installed in a room without a window or other controllable opening. If is installed In a room without a door which opens directly to tohe outside, a permanent opening Is required. The air circulation should be 2 m3/h per kW of burners. Connection of the gas hose to the oven Convenient position is selected by interchanging the hose nozzle and plug according to the location of the main gas inlet valve. If you make a connection with a flexible metal hose, locate a seal between the main gas pipe, The inner diameter of the flexible hose, which the butane hose nozzle is connected, should be 6mm for the house-type gas tubes. The inner diameter of the flexible hose, which the natural hose nozzle is connected, should be 15mm. The hose should tightly be fitted to the hose nozzle by squeezing with a clamp.The plastic hose end is soaked in hot water for one minute to soften and inserted fully into the hose nozzle. The clamp is fastened securely by a screw driver. The other end of the hose is connected to the gas valve with the same operation. The hose should be replaced before Its last expiry date. plug Hose nozzle Caution! Make the oven connection to the gas inlet valve, the hose length must be short and be sure that there is no leakage. The hose used should not be longer than 125 cm for safety. Connection of the gas hose to the oven Convenient position is selected by interchanging the hose nozzle and plug according to the location of the main gas inlet valve. The plastic hose end is soaked in hot water for one minute to soften and inserted fully into the hose nozzle. The clamp is fastened securely by a screw driver. The other end of the hose is connected to the gas valve with the same operation. Gas leakage control During control, be sure that the control knobs are closed and the gas inlet valve is open. Apply soap bubbles to the connections for leakage control. In case leakage exists, buble will appear. In such case, check the gas connection immediately. Do not control gas leaks by using fire. Caution! Never use lighter or match flame, for controlling the gas lackage. Hose nozzle and elbow types for Natural gas and Butane/propane In models with “ covered type-terminal block If there is no supply cord attached to your oven, it is necessary to select the type indicated on below and follow the instructions Disconnect the appliance from the network. 1 .open terminal cover with screwdriwer 2.ope...

Descargar ahora

Introduzca dos números de la imagen: