Iniciar sesión:
Votos - , Puntuación media: ( )

Manual de usuario Bosch, modelo HGN10G050/01

Fabricar: Bosch
Tamaño del archivo: 2.15 mb
Nombre del archivo:

Idioma del manual:en

El documento se está cargando, por favor, espere
El documento se está cargando, por favor, espere


Otros manuales para este modelo:
Placa - HGN10G050/01 (762.08 kb)en

Resumen del manual


Before using the oven for the first time In this section, you can find out what you must do before using your appliance to prepare food for the first time. Read the Safety information section beforehand. Remove the appliance packaging and dispose of it appropriately. Baking out the oven Precleaning the oven 1. Remove accessories and hook-in racks from the cooking compartment. 2. Fully remove any remaining packaging, such as small pieces of polystyrene, from the cooking compartment. 3. Some parts are covered with a protective film. Remove the protective film. 4. Clean the outside of the appliance with a soft, damp cloth. 5. Clean the cooking compartment with hot soapy water. Heating up the oven To remove the new cooker smell, heat up the oven when it is empty and closed. 1. Turn the temperature selector to the maximum temperature. 2. Switch off the oven after 45 minutes. Recleaning the oven 1. Clean the cooking compartment with hot soapy water. 2. Fit the hook-in racks. Cleaning the accessories Before using the accessories, clean them thoroughly using a cloth and warm soapy water. How to operate your oven Oven lighting Switching on the oven lighting Turn the control knob to the ^ position. The oven lighting switches on when the timer is switched on or the oven door is opened. Switching off the oven lighting Turn the control knob to the U position. The oven lighting switches off. Operating modes The following operating modes are available. Operating mode Application t Oven gas burner 150250 ° C For cakes and pastries, bakes, poultry, lean joints of meat, e. g. beef, veal and game. G Gas grill For steaks, sausages, fish and toast. Operating the oven Switching on the oven gas burner 1. Open the appliance door. 2. Press the control knob for the oven and turn it to the 250 ° C position. 3. Press and hold the control knob for a few seconds until the flame stabilises. 4. Close the appliance door carefully. 5. Turn the control knob to set the desired temperature. Do not turn the knob beyond the " Min" position. If the flame goes out Switch off the control knob. Wait one minute and switch the burner on again. : Risk of fire! If the flame goes out, gas will escape. Never leave the gas burner unattended during operation. Ensure that there are no draughts. Switching off the oven gas burner Turn the control knob to the U position. Press and hold the control knob. Operating the grill The appliance door must be closed when grilling. Notes ¦ It is not possible to use the oven gas burner and the grill at the same time. ¦ When using the grill, a cooking time of 60 minutes must not be exceeded. ¦ When switching on the grill, the drive for the rotary spit is automatically activated. Switching on the grill gas burner 1. Open the appliance door. 2. Press the control knob for the oven and turn it to the G position. 3. Press and hold the control knob for a few seconds until the flame stabilises. 4. Close the appliance door carefully. Switching off the grill Turn the control knob to the U position. Operating the rotary spit The rotary spit can be used with excellent results to cook joints, such as rolled roasting joints and poultry. The meat is roasted thoroughly and evenly. The drive for the rotary spit is automatically activated as soon as you switch on the grill. Preparing roasts 1. Place the joint as centrally as possible on the rotary spit and secure it at both ends with the retaining clips. You can also secure the joint using kitchen twine. 2. With poultry, bind the ends of the wings underneath the back and the thighs against the body. This prevents them from overbrowning. 3. Pierce the skin on the underside of the wings to allow the fat to escape. Inserting the rotary spit : Risk of burns! Never touch the hot surfaces of the cooking compartment or the heating elements. Children must be kept at a safe distance from the appliance at all times. Open the appliance door carefully. Hot steam may escape. 1. Insert the rotary spit shelf at level 2 as far as it will go. 2. Slide the rotary spit into the motor mount in the back wall of the cooking compartment (a) . 3. Place the rotary spit on the rotary spit shelf (b) . Note: The rotary spit must engage correctly in the rotary spit shelf. 4. Unscrew the handle (c) . 5. Pour water into a baking tray and slide the baking tray into shelf position 1 to collect the drips of fat. 6. Close the appliance door. Switching on the rotary spit Turn the control knob for the oven to the G position. Switching off the rotary spit Turn the control knob for the oven to the U position. Removing the rotary spit : Risk of burns! Never touch the hot surfaces of the cooking compartment or the heating elements. Children must be kept at a safe distance from the appliance at all times. Open the appliance door carefully. Hot steam may escape. : Risk of burns! Never touch the rotary spit or other accessories directly when they are hot. Always wear oven gloves or heat-resistant gloves when handling hot accessories...

Otros modelos de este manual:
Placa - HGN10G050/02 (2.15 mb)
Placa - HGN10G060/01 (2.15 mb)
Placa - HGN10G060/02 (2.15 mb)

Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría