Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
¦ Never use extension cables or multiple plugs. ¦ For safety reasons, this appliance must only be connected to an earthed connection. If the safety earth terminal does not comply with regulations, safety against electrical hazards is not guaranteed. ¦ You must use a H 05 W-F type cable or equivalent for the appliance connection. Levelling the cooker Always place the cooker directly on the floor. 1. Pull out the plinth drawer and lift it up and out. There are adjustable feet at the front and rear on the inside of the plinth. 2. Use an Allen key to raise or lower the adjustable feet as necessary until the cooker is level (picture A). 3. Push the plinth drawer back in (picture B). Setting up the appliance .................... ¦ The appliance must be set up directly on the kitchen floor and in line with the specified dimensions. The appliance must not be set up on any other object. ¦ The distance between the top edge of the oven and the bottom edge of the extractor hood must meet the requirements of the extractor hood manufacturer. ¦ Ensure that the appliance is not moved again after set up. The distance from the high output burner or wok burner to the fronts of the adjacent units or the wall must be at least 50 mm. Measures to be noted during transport Secure all mobile parts in and on the appliance using an adhesive tape that can be removed without leaving any traces. Push all accessories (e.g. baking tray) into the corresponding slots with cardboard at the edges, in order to avoid damaging the appliance. Place cardboard or similar between the front and rear side to prevent knocks against the inside of the glass door. Secure the door and, if available, the top cover to the appliance sides using adhesive tape. Keep the original appliance packaging. Only transport the appliance in the original packaging. Observe the transport arrows on the packaging. If the original packaging is no longer available pack the appliance in protective packaging to guarantee sufficient protection against any transport damage. Transport the appliance in an upright position. Do not hold the appliance by the door handle or the connections on the rear, as these could be damaged. Do not place any heavy objects on the appliance. .. .. Your new cooker Here you will learn about your new cooker. We will explain the General information control panel, the hob and the individual operating controls. You will find information on the cooking compartment and the The design depends on the respective appliance model. accessories. ......................W ................ ................................ ................................ .......................... ........................W ....................O ............................ ........................U Control panel Here you can see an overview of the control panel. The design depends on the respective appliance model. ................U .............. .................. .......................... ............................Q ................V ................U Explanations 1 Switch for the gas burner (function selector) 2 Multi-function button 3 Ignition button 4 Cooker switch 5 Operating switches and display panel ............ Cooking area Here is an overview of the control panel. The design depends on the respective appliance model. .. Explanations 1 Steam outlet Caution! During oven operation, hot steam escapes at this point Standard burner Standard burner High output burner Economy burner Burner Pot or pan diameter Economy burner 1 kW 12- 18 cm Standard burner 1.7 kW 18- 24 cm High output burner 3 kW 24- 28 cm Only use pots or pans with an even base. Place the pot or pan centrally over the burner. This will optimise transfer of the heat from the burner flame to the pot or ban base. The handle does not become damaged, and greater energy savings are guaranteed. Burner knob You can adjust the heat setting of the hotplates using the four burner knobs. Positions Function/gas oven U Zero position The oven is switched off. • – Settings area Large flame = highest setting Economy flame = lowest setting Ignition button This button activates the electronic ignition system. When you press the button, all igniters ignite at the same time. Oven Function selector If you turn the function selector anti-clockwise, the oven is heated; if you turn it clockwise, the grill function is switched on. Positions Function u Zero position Oven not hot. 170-270 Temperature range Temperature range in .C for baking cakes in baking tins, pizza on the baking sheet, biscuits etc. # Grill setting Setting for the grill burner for grilling at maximum temperature. Heat setting for the lower burner: 3 kW Heat setting of the oven gas grill: 2,1 kW Light button This button switches on the oven light. To switch it off, press the multi-function button again. Buttons and display The buttons are used to select the various additional functions. In the display, you can read the values that you have set. Button Function 0 Clock butt...