Votos - 3, Puntuación media: 3.3
(
)
)
|
Resumen del manual
This device combines precise time keeping with monitoring and displaying the wind speed information and temperature/ humidity data from up to five remote locations. In this package you will find: • One main unit (receiver) TE852W • One three-channel remote temperature and humidity sensor (transmitter) TS33C • One Wind Speed Meter (transmitter) TS815 • Mounting Hardware with wrench tool for Wind Speed Meter • One User Manual Please keep this manual handy as you use your new item. It contains practical step-by- step instructions, as well as technical specifications and precautions you should know. STANDARD PACKAGE CONTENTS Picture Components Main Unit (receiver) Thermo Hygrometer Sensor (transmitter) Wind Speed Meter (transmitter) Consist of: Meter Arm, Meter Base and Wind Cups 4 screws and small wrench tool Mounting hardware INSTALLATION The Honeywell Weather Forecaster with Wind Speed TE852W operates at 433MHz radio frequency, so no wire installation is required between the main unit (receiver) and the remote weather sensors (transmitters) . The remote weather sensors include a temperature and humidity sensor and wind speed sensor. All data measured by these remote sensors is transmitted to the main unit wirelessly, with the operating range in the open area from 100 feet ( 30 meters) for wind speed meter up to 328 feet (100 meters) for temperature and humidity sensor. Remote wind speed meter must be placed outdoors to measure and transmit a wind speed data. Remote thermo-hygrometer( s) can be placed indoors or outdoors, depending on the area where the temperature and humidity are intended to be measured. If you intend measuring outdoor temperature and humidity, place the remote sensor outdoors. NOTE: It is critical to assemble and power up all remote weather sensors BEFORE setting up the main unit. NOTE: It is critical to power up and test communication between the weather sensors and the main unit BEFORE permanently mounting them outside. 3 4 3 BEFORE YOU BEGIN • We recommend using alkaline batteries for the remote weather sensors and the main unit when temperatures are above 32°F (0° C). We recommend using lithium batteries for the remote weather sensors when temperatures are below 32°F (0° C) • Avoid using rechargeable batteries. (Rechargeable batteries cannot maintain correct power requirements) • ALWAYS install batteries in the remote weather sensors before the main unit • Insert batteries before first use, matching the polarity in the battery compartment • Remove protective plastic screen from LCD display (if any) • During an initial setup, place the remote weather sensors close to the main unit • After reception is established (all remote readings will appear on the main unit’s display), position the remote sensors and the main unit within the effective transmission range: 328 feet (100 meters) for temperature/humidity sensors and 100 feet (30 meters) for wind speed meter. Ideally they should be placed within the line of sight from the main unit. See placement tips in the user manual for each remote weather sensor. • Transmission/reception range may be affected by trees, metal structures and electronic appliances, by surrounding building materials and the way how the receiver (main unit) and transmitters (remote weather sensors) are positioned. • The main unit must be placed indoors. • Place the remote sensor so that it faces the main unit (receiver), minimizing obstructions such as doors, walls and furniture. 5 NOTE: When the temperature falls below freezing, the batteries in the outdoor remote sensor may have reduced voltage supply and a shorter effective range. We recommend using lithium batteries at temperatures of 32°F (0°C) and below. IMPORTANT: Make sure that remote weather sensors are easily accessible for cleaning and maintenance. We recommend cleaning the remote weather sensors periodically, as the dirt and debris may affect sensors accuracy. REMOTE TEMPERATURE & HUMIDITY SENSOR FEATURES • Remote data transmission to the main unit via 433 MHz frequency • LCD displays temperature, humidity and channel • Selection of the temperature display in Celsius or Fahrenheit • Three (3) transmission channels selection • Case can be wall mounted using built-in hanger A. LED INDICATOR • Flashes once when the remote sensor transmits a reading to the main unit. • Flashes twice when battery power is low. 6 5 B. BATTERY COMPARTMENT • Holds two AA-size batteries C. RESET • Resets all previous settings D. CHANNEL SWITCH • Selects the desired channel -1,2 or 3 E. WALL-MOUNT RECESSED OPENING • Keeps the remote sensor on the wall F. °C/ ° F SWITCH • Selects the temperature display in Fahrenheit or Celsius NOTE: Install the batteries; select the channel and temperature in ° C or ° F before mounting the sensor. BATTERY INSTALLATION • Remove the screws from the battery compartment with a small Phillips screwdriver. • Set the channel 1 through 3. The switch is located in the battery compartment. Channel 1 is typicall...
Otros modelos de este manual:Estación meteorológica - TE852ELW (369.66 kb)
Estación meteorológica - TS815 (369.66 kb)