Iniciar sesión:
Votos - 4, Puntuación media: 3.5 ( )

Manual de usuario Bush Hog, modelo 2427

Fabricar: Bush Hog
Tamaño del archivo: 1.37 mb
Nombre del archivo: 9ee57b11-1466-403c-8efe-e2ce92e52f91.pdf
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


2. Become familiar with all the machine’s controls and all the caution, warning and danger decals affixed to the machine before attempting to start or operate. 3. Improper use of a loader can cause serious injury or death. 4. Do not lift or carry anybody on the loader or in the bucket or attachment. 5. Never allow anyone to get under the loader bucket or reach through the booms when the bucket is raised. 6. Do not walk or work under a raised loader bucket or attachment unless it is is securely blocked or held in position 7. Avoid overhead wires and obstacles when loader is raised. Contacting electrical lines can cause electrocution. 8. Make sure all parked loaders on stands are on a hard, level surface. 9. Use a piece of cardboard or wood rather than hands and wear eye protection when searching for hydraulic leaks. Escaping hydraulic oil under pressure can penetrate skin. If oil is injected into skin, it must be surgically removed within a few hours by a doctor or gangrene may result. 5 SAFETY PRECAUTIONS CONTINUED 10. Before disconnecting hydraulic lines, relieve all hydraulic pressure. 11. Do not tamper with the relief valve setting. The relief valve is pre-set at the factory. Changing the setting can cause overloading the loader and tractor and serious operator injury may result. 12. Always wear safety goggles when repairing or servicing machine. 13. When servicing or replacing pins in cylinder ends, buckets, etc., always use a brass drift and hammer. Failure to do so could result in injury from flying fragments. 14. Replace damaged or illegible safety decals. See decal page for required decals. 15. Do not modify or alter or permit anyone else to modify or alter the loader, any of its components or any loader function without first consulting your local dealer. OPERATING THE LOADER 1. It is the loader owner’s responsibility to instruct and have a person read operator’s manual, safety decals and become familiar with machine controls before allowing them to operate loader. 2. Do not allow children to operate the loader. 3. Before starting or operating the equipment, make a walk around inspection and check for loose or damaged components. Correct any deficiency before starting. 4. Keep the area of operation clear of all persons, particularly small children. The operator should cease operation whenever anyone comes within the operating area. 5. Operate the loader from the “Operator’s Seat Only.” 6. Exercise caution when operating the loader with a raised loaded bucket, fork, or large round hay bale handling attachments. 7. Avoid loose fill, rocks and holes. They can be dangerous for loader operation or movement. 8. Be extra careful when working on inclines. 9. Allow for the loader length when making turns. 10. Stop the loader arms gradually when lowering or lifting. 11. Use caution when handling loose or shiftable loads. 12. Carry loader arms at a low position during transport. 13. Lower loader arms, stop engine, and lock brakes before leaving the tractor seat. 14. Operate the loader controls only when properly seated at the controls. 15. Do not use loader for handling large, heavy objects such as logs, oil drums, etc. 16. Handling large, heavy objects is dangerous due to: *Possibility of rolling the tractor over. *Possibility of upending the tractor. *Possibility of the object rolling or sliding down the loader arms onto the operator. 17. Use large round hay bale handler attachment with bale retaining devices (grapples, bale spears, clamps, etc.) to handle large round hay bales. Failure to use retaining devices could allow round hay bales to roll or fall down loader boom arms onto the operator causing serious injury or death and equipment damage. 6 IMPORTANT FEDERAL LAWS AND REGULATIONS* CONCERNING EMPLOYERS, EMPLOYEES AND OPERATIONS. *(This section is intended to explain in broad terms the concept and effect of the following federal laws and regulations. It is not intended as a legal interpretation of the laws and should not be considered as such). U.S. Public Law 91-596 (The Williams-Steiger Occupational and Health Act of 1970) OSHA This Act Seeks: “...to assure so far as possible every working man and woman in the nation safe and healthful working conditions and to preserve our human resources...” DUTIES Sec. 5 (a) Each employer— (1) shall furnish to each of his employees employment and a place of employment which are free from recognized hazards that are causing or are likely to cause death or serious physical harm to his employees; (2) shall comply with occupational safety and health standards promulgated under this Act. (b) Each employee shall comply with occupational safety and health standards and all rules, regulations and orders issued pursuant to this Act which are applicable to his own actions and conduct. OSHA Regulations Current OSHA regulations state in part: “At the time of initial assignment and at least annually thereafter, the employer shall instruct every employee in the safe operation a...

Otros modelos de este manual:
Cargadoras - 2847 (1.37 mb)
Cargadoras - 3227 QT (1.37 mb)

Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría