Votos - 5, Puntuación media: 4
(
)
)
|
Resumen del manual
2 3 Your dishwasher cleans by spraying a mixture of hot water and detergent through the spray arms against soiled surfaces. Each cycle begins with a pre-drain. Next, the dishwasher fills with water covering the filter area. Water is then pumped through the filter and spray arms. Soil particles go down the drain as the water is pumped out and replaced with clean water. The number of water fills will vary with the cycle being used. Dishwasher Features Serial Label (located on right side of tub) Bottom Rack page 8 Heating Element page 11 Glass Trap page 11 Self-Cleaning Filter page 11 Tub Gasket page 11 Lower Spray Arm pages 8,13 Overfill Protector page 11 Top Rack page 7 Middle Spray Arm pages 7,13 Detergent Dispenser page 9 Nozzle and Upper Spray (some models) Prewash Detergent Cup page 9 Rinse Aid Dispenser page 10 Vent pages 4,6,14 Funnel pages 7,13 Operating Instructions Vent Latch Very Important Information—Read Before Operating Your Dishwasher! Normal Operating Sounds This dishwasher does not sound like most dishwashers—IT’S QUIETER. Your Precision Wash System® dishwasher uses energy efficient motors for the wash and drain portions of the cycle you select. Each cycle has a series of water fills and drains for washing and rinsing dishes. As each cycle begins, you may–or may not– hear the drain motor. The next sound you will hear is the splashing water as it enters the tub. Then the lower arm rotates and circulates water. This is followed by a pause and a slightly different sound as the middle arm sprays water. If you listen closely, you will hear the change in sound as the wash action switches from one arm to the other. PLEASE BE ADVISED: If you compare this dishwasher to previous models, you may be surprised at what you DON’T hear! Getting Started 1. Load dishwasher (See Preparing and Loading Dishes). Appearance may vary from your model. 2. Add detergent (See Dishwasher Dispenser & Detergents). 3. Add rinse aid, if needed (See Rinse Aid). 4. Turn dial clockwise to select cycle (See Cycle Chart) or number of hours for delay start. 5. Select desired energy OPTIONS (See Energy Options). The indicator will show red when selected. 6. If using DELAY START, go to step number 9. 7. For instructions on connecting the portable dishwasher, see “Connecting and Disconnecting the Portable/Convertible Dishwasher.” 8. Run hot water faucet nearest dishwasher until water is hot. Turn water off. 9. To start, close door to latch. Delay Start Allows you to delay starting the POTS & PANS cycle. • Turn dial to select number of hours. • Select HI-TEMP WASH ON option and other desired options. • Close door to latch. The DELAY START light (available select models) will come on. Plate Warmer (available select models) For warming dishes and serving plates before serving hot foods: • Load clean plates and dishes to be warmed. • Turn dial to PLATE WARMER. • Select HEAT DRY ON option. 4 Operating Instructions (continued) Wash Cycle Selections Note: Cycle times are approximate and will vary with options selected. Not all cycles available on all models. Cycle Chart Cycle Description To Select Cycle Water (approx.) Time* (approx.) Washes/ Rinses Pots & Pans For pots, pans, casseroles, and dinnerware with dried- on or baked-on soils. • Turn dial to POTS & PANS/HEAVY WASH. • Select HI-TEMP WASH ON option. • Select other desired OPTIONS. gal. imp. gal. liters 7.2 6.0 27.3 82 min. 2 washes 4 rinses Heavy Wash For heavily soiled dishes and silverware. • Turn dial to POTS & PANS/HEAVY WASH. • Select desired OPTIONS. gal. imp. gal. liters 7.2 6.0 27.3 82 min. 2 washes 4 rinses Normal Wash For regularly soiled dishes and silverware. • Turn dial to NORMAL WASH. • Select desired OPTIONS. gal. imp. gal. liters 6.0 5.0 22.7 76 min. 2 washes 3 rinses Light Wash For lightly soiled or pre-rinsed dishes and silverware. • Turn dial to LIGHT WASH. • Select desired OPTIONS. gal. imp. gal. liters 4.8 4.0 18.2 69 min. 1 wash 3 rinses Rinse/ Hold For rinsing dishes that will be washed later. • DO NOT USE detergent. • Turn dial to RINSE/HOLD. (Models with SANITIZE option, select SANITIZE OFF and HEAT DRY OFF.) gal. imp. gal. liters 1.2 1.0 4.5 4-12 min. 1 rinse Energy Options Hi-Temp Wash Option When HI-TEMP WASH ON option is selected, the dishwasher heats the water in the main wash to approximately 140°F (60°C). Wash action will continue but timer will not advance until proper temperature is reached. The hotter water provided by this option helps activate dishwasher detergent to clean food grease and soil from dishes. HI-TEMP WASH ON option can be used with any cycle except RINSE/HOLD. To turn off option, select HI-TEMP WASH OFF. Sanitize Option (available select models) To sanitize your dishes and glassware, select the SANITIZE ON option. The water temperature in the final rinse will be raised to 155°F (68°C) and will maintain that temperature for 9 minutes. This option is available in Pots & Pans, Heavy, Normal and Light cycles. The cycle time will be exte...
Otros modelos de este manual:Lavavajillas - 650 Series (1.01 mb)
Lavavajillas - 650 Series (1.01 mb)
Lavavajillas - 650 Series (1.01 mb)
Lavavajillas - 650 Series (1.01 mb)