Votos - 2, Puntuación media: 3.5
(
)
)
|
Resumen del manual
If water remains inside the dishwasher, check that: • the drain hose is not kinked; • the drain siphon is not obstructed; • the dishwasher filters are not clogged. If the dishes are not being cleaned properly, check that: • the correct amount of detergent has been added; • there is regenerating salt inside the special container; • the dishes are being loaded correctly; • the selected program is suitable for the dish types and their degree of soiling; • all the filters are clean and positioned correctly; • the spray arm nozzles are not obstructed; • there is no object obstructing the rotation of the spray arms. 49 User instructions If the dishes fail to dry or remain dull, check that: • there is rinse aid inside the special container; • the rinse aid dispenser setting is correct; • the detergent used is of good quality and has not lost its effectiveness (for example, through incorrect storage, with the box left open). If the dishes show signs of streaking, staining, etc., check that: • the rinse aid dispenser setting is not too high. If there are visible traces of rust inside the tank: • the tank is made of steel, and therefore any rust marks are due to external elements (fragments of rust from the water pipes, pots, cutlery, etc.). Special products are commercially available to remove such marks; • check that the amount of detergent being used is correct. Certain detergents can be more corrosive than others. • check that the cap of the salt container is securely closed, and that the water softening setting is correct. If after following the above troubleshooting instructions the problem persists, call the nearest After-Sales Centre. WARNING: any operations performed on the appliance by unauthorised persons are not covered by the warranty and shall be paid for by the user. TECHNICAL DATA Width 597 . 599 mm Depth measured flush with the outer edge of the control panel Free standing: 600 mm Semi-integrated: 570mm- Fully integrated: 550mm Height Free standing from 850 mm to 870 mm Semi-integrated and fully integrated: from 820 mm to 870 mm Capacity 12 Standard place settings Water supply pressure min. 0,05 - max. 0,9 MPa (min. 0.5 – max. 9 bar) Electrical characteristics See rating plate 50 User instructions User instructions .... 1. Description of the controls 1.1 Upper panel All the dishwasher controls are grouped on the upper panel. Switch-on, programming, switch-off etc. procedures are only possible when the door is open. 1 ON/OFF BUTTON Pressing this button energises the appliance. 2 SELECTED PROGRAM INDICATOR LIGHTS Illumination of this light denotes the program selected and the occurrence of a fault (troubleshooting). 3 PROGRAM SELECTION BUTTON By pressing this button in sequence it is possible to select the desired program. 4 SALT WARNING LIGHT (certain models only) Illumination of this light signals that salt container is empty. 5 RINSE AID WARNING LIGHT (certain models only) Illumination of this light signals that rinse aid dispenser is empty. 6 EXTRA PROGRAM BUTTON This button gives access to the one of the five extra programs (see table). 7 EXTRA PROGRAM LIGHT Illuminates to indicate that one of the five extra programs (see table) is going to be executed. 2 3 4 5 11 10 7 6 9 8 13 12 1 User instructions .... 8 "3/1" OPTION BUTTON (on some models only) Press this button to activate the option for use of 3/1 products. 9 "3/1" OPTION LIGHT (on some models only) Illuminates to indicate that the function is activated. 10 HALF LOAD BUTTON (on some models only) Press this button to activate the half load wash option. 11 HALF LOAD LIGHT (on some models only) One of the two buttons illuminates to indicate that the half load wash option in the top or bottom basket has been selected. 12 PROGRAM DELAY BUTTON (on some models only) Press this button to delay the start of the program by up to 9 hours. 13 INFORMATION DISPLAY (on some models only) User instructions .... SETTING THE WASHING PROGRAM AND SWITCHING ON To select the most suitable program for the dishes to be washed refer to the table below, which indicates the most appropriate program according to dish type and degree of soiling. After using the table to identify the most appropriate washing program: • press the ON/OFF button (1) and wait for the PROGRAM INDICATOR LIGHT (2) to illuminate; • keep pressing the PROGRAM SELECTION button (3) until the indicator light corresponding to the desired program illuminates; • close the door; after about 2" the program will start. While it is in progress, the relative LIGHT will flash (indicating that the program is being executed). 2 3 4 5 11 10 7 6 9 8 13 12 1 DURATION CONSUMPTION MINUTES (2) WATER LITRES (1) POWER KWh (2) 1 RINSE 45' 9 0,9 2 DELICATE 75' 16 1,15 3 AUTO 60-70 (**) (**) (**) 4 BIO 180' 15 1,10 Cold rinse Rinse at68°C Dry Cold prewash Wash at 45°C Cold rinse Rinse at68°C Dry Cold prewash Wash at 55°C Cold rinse Rinse at68°C Dry Dishes with normal dirt Normally soiled dishes, including dried-on residue ...
Otros modelos de este manual:Lavavajillas - FULLY INTEGRATED VW80 (1.37 mb)
Lavavajillas - FULLY INTEGRATED VW80 (1.37 mb)