Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
mixed utensils and cutlery part dried, common household food remnants a Eco 50° Prerinse Clean 50° Intermediate rinse Final rinse 65° Dry sensitive utensils, cutlery, temperature- sensitive plastic and glasses slightly adhesive, fresh food remnants e Gentle 40° Reduce Time Half load Prerinse Clean 40° Intermediate rinse Final rinse 55° Dry o Quick 45° none Clean 45° Intermediate rinse Final rinse 55° all types of utensils cold rinsing, intermediate cleaning u Prerinse none Prerinse Programme selection You can select a suitable programme according to the type of utensils and degree of soiling. Information for test institutes Test institutes can request the conditions for running comparison tests by sending an e-mail to dishwasher@test-appliances.com. Quote the appliance number (ENr.) and the production date (FD) which you can find on the rating plate 9: on the appliance door. en Additional options * depending on model Additional options can be set with the buttons H. Y Express Wash * The >>Express Wash<< function can reduce the running time by approx. 20% to 50% depending on the selected rinse programme. The change in the running time is indicated on the digital display @. To obtain optimum cleaning results at a reduced running time, water and energy consumption are increased. §Half load * If you have only a few items to wash (e.g. glasses, cups, plates), you can switch to “half load”. This will save water, energy and time. It is recommended to put a little less detergent in the detergent dispenser than for a full load. Basic functions Programme data The programme data (consumption values) can be found in the summary of instructions. They refer to normal conditions and the water hardness set value …. Different influencing factors such as water temperature or line pressure may result in deviations. Aqua sensor * * depending on model The Aqua sensor is an optical measuring device (light barrier) which measures the turbidity of the rinsing water. The Aqua sensor is used according to the programme. If the Aqua sensor is active, “clean” rinsing water can be transferred to the next rinse bath and water consumption can be reduced by 2–4 litres. If the turbidity is greater, the water is drained and is replaced with fresh water. In the automatic programmes the temperature and running time can also be adjusted to the degree of soiling. Switching on the appliance – Turn on the tap fully. – Open the door. – Switch on the main switch (. The display of the last selected programme flashes. This programme runs if no other programme button h is pressed. The expected programme duration is indicated on the numerical display @. – Close the door. The programme starts running. en Optical display while the programme is running * * depending on model While the programme is running, a light spot shines on the floor under the appliance door. Do not open the dishwasher door until the light point is no longer visible on the floor. If the appliance is installed at eye-level, with flush furniture front, the light point is not visible. Remaining running time display When the programme is selected, the remaining running time of the programme is indicated on the digital display @. The running time is determined during the programme by the water temperature, the number of utensils as well as the degree of soiling and may vary (depending on the selected programme). Timer programming * * depending on model You can delay the start of the programme in 1 hour steps up to 19 hours. – Switch on the main switch (. – Press the timer programming button 8 until the digital display @ jumps to ‚oe. – Keep pressing the timer programming button 8 until the required time is displayed. – To delete the preselected starting time, press the button 8 until ‹oe is indicated on the digital display @. You can change your programme selection at any time until the programme starts. End of programme The programme has ended when the value ‹ is indicated on the numerical display @. The end of the programme is also indicated by an acoustic signal. This function can be changed as follows: – Open the door. – Hold down programme button 3 and switch on the main switch (. – Release both buttons. The programme button 3 flashes and the factory-set value . (half-loud) lights up on the numerical display @. To change the setting: – Press programme button 3. Each time the button is pressed, the set value increases by one level; when the value of „ has been reached, the display jumps back to ‹ (off). – Switch off main switch (, the set value is saved. – Close the door. Switching off the appliance Short time after the end of the programme: – Switch off the main switch (. – Open the door. – Turn off the tap (not applicable if Aqua- Stop fitted). – Remove the utensils when they have cooled down. a=Warning At the end of the programme please open the door fully and not partially when emptying the dishwasher. Any escaping water vapour could damage sensitive worktops. en Interrupting the p...
Otros modelos de este manual:Lavavajillas - SE64M351GB/14 (3.58 mb)