Votos - 2, Puntuación media: 4
(
)
)
|
Resumen del manual
SAFETY AND WARNINGS WARNING! Electrical hazard Before installing the DishDrawer®, remove the house fuse or open the circuit breaker. If permanently connecting the DishDrawer®, be sure the power is isolated and the DishDrawer® unplugged. GROUNDING INSTRUCTIONS This appliance must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment- grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is installed and grounded in accordance with all local codes and ordinances. WARNING - Improper connection of the equipment- grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service representative if you are in doubt as to whether the appliance is properly grounded. If the DishDrawer is installed as a permanently connected appliance: GROUNDING INSTRUCTIONS - This appliance must be connected to a grounded metal, permanent wiring system, or an equipment- groounding conductor must be run with the circuit conductors and connected to the equipment- grounding terminal or lead on the appliance. Do not modify the power supply plug provided with the appliance - if it will not fit the outlet, have a proper outlet installed by a qualified electrician. Do not use an extension cord, adapter plug or multiple outlet box. Failure to follow this advice may result in electrical shock or death. WARNING! Cut hazard Take care - panel edges are sharp. Failure to use caution could result in injury or cuts. Important safety instructions! Installation of this DishDrawer® requires basic mechanical and electrical skills. Be sure to leave these Instructions with the Customer. Installation must comply with your local building and electricity regulations. At the completion of the DishDrawer® installation, the Installer must perform Final Check List. Remove all packaging materials supplied with the DishDrawer®. This DishDrawer® is manufactured for indoor use only. Ensure all water connections are turned OFF. It is the responsibility of the plumber and electrician to ensure that each installation complies with all Codes and Regulations. The DishDrawer® MUST be installed to allow for future removal from the enclosure if service is required. The switched power outlet must be outside the DishDrawer® cavity so that it is accessible after installation. Care should be taken when the appliance is installed or removed to reduce the likelihood of damage to the power supply cord. If the DishDrawer® is to be relocated from one installation to another it must be kept upright to avoid damage from water spillage. Make sure only new hoses are used for connection (supplied with DishDrawer®). Old hoses should not be reused. Failure to install the DishDrawer® correctly could invalidate any warranty or liability claims. If the product is installed in a motor vehicle, boat or similar mobile facility, you must bring the vehicle, boat or mobile facility containing the product to the service shop at your expense or pay the service technician’s travel to the location of the product. Product dimensions (inches (mm)) Prefi nished LCD DD24DT Prefi nished Flat door DD24DT Integrated DD24DT A overall height* of product 34 - 36 3.8” (863.5- 923.5) 34 - 36 3.8” (863.5- 923.5) 34 - 36 3.8” (863.5- 923.5) B overall width of product 23 9.16”(599) 23 9.16”(599) 23 9.16”(599) C overall depth of product (excl. curvature/handle) 22 7.16” (570) 22 7.16” (570) 22 7.16” (570) D depth of drawer (open) (excl. curvature/handle) 21 3.16” (538) 21 3.16” (538) 21 3.16” (538) E height* of chassis 33 9.16” (853) 33 9.16” (853) 33 9.16” (853) F height range of levelling feet 2 3.8” (60) 2 3.8” (60) 2 3.8” (60) G depth of chassis (incl. trimseal) 21 . ” (552) 21 . ” (552) 21 . ” (552) H depth of drawer front panel (excl. curvature/handle) 11.16” (18) 11.16” (18) 11.16” (18) I depth of curvature or handle 7.16” (11) 1 5.8” (41) n/a J depth of toekick 2 - 4 5.16” (50 - 110) 2 - 4 5.16” (50 - 110) 2 5.8 - 5”(67 - 127)** K height of upper drawer front 17 . ” (438) 17 3.8” (442) 17 3.8” (442) min L height of lower drawer front 12 5.16” (312) 12 5.16” (312) 12 5.16” (312) min M height of installation bracket slots (on top of chassis) 1.16” (2) 1.16” (2) 1.16” (2) N height of drawer fronts 29 9.16” (751) 30 1.16” (764) 30” (762) min * Chassis heights include bracket slots ** less the Toekick Panel thickness (Minimum Panel thickness using the supplied screws is 3.8” (9 mm)). Note: for Prefi nished Flat door models, height from top of handle to top of drawer - 2 . ” (64 mm). Cabinetry dimensions (inches (mm)) Prefi nished LCD DD24DT Prefi nished Flat door DD24DT Integrated DD24DT A inside height of cavity 34 - 36 . ” (864 - 926.5) 34 - 36 . ” (864 - 926.5) 34 - 36 . ” (864 - 926.5) B inside width of cavity 23 5.8” (600) 23 5.8” (600) 23 5.8” (600) C insi...