Votos - 0, Puntuación media: 5
(
)
)
|
Resumen del manual
it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features. Save these instructions and make sure that they remain with the appliance if it is moved or sold, so that everyone using it through its life will be properly informed on appliance use and safety. Correct use This dishwasher is only intended for washing household utensils suitable for machine washing. Do not put any solvents in the dishwasher. This could cause an explosion. Knives and other items with sharp points must be loaded in the cutlery basket with their points down or placed in a horizontal position in the upper basket. Only use products (detergent, salt and rinse aid) suitable for dishwashers. Avoid opening the door whilst the appliance is in operation, hot steam may escape. Do not take any dishes out of the dishwasher before the end of the dishwashing cycle. After use, isolate the appliance from the power supply and turn off the water supply. This product should be serviced only by an authorised service engineer, and only genuine spare parts should be used. General safety Dishwasher detergents can cause chemical burns to eyes, mouth and throat. Could endanger life! Comply with the safety instructions of the dishwasher detergent manufacturer. The water in your dishwasher is not for drinking. Detergent residues may still be present in your machine. Ensure that the door of the dishwasher is always closed when it is not being loaded or unloaded. In this way you will avoid anybody tripping over the open door and hurting themselves. Do not sit or stand on the open door. Child safety This appliance is designed to be operated by adults. Don’t allow children to use the dishwasher unsupervised. Keep all packaging well away from children. There is risk of suffocation. Keep all detergents in a safe place out of children’s reach. Keep children well away from the dishwasher when the door is open. Installation Check your dishwasher for any transport damage. Never connect a damaged machine. If your dishwasher is damaged contact your supplier. All packaging must be removed before use. Any electrical and plumbing work required to install this appliance must be carried out by a qualified and competent person. For safety reasons it is dangerous to alter the specifications or attempt to modify this product in any way. Never use the dishwasher if the electrical supply cable and water hoses are damaged; or if the control panel, work top or plinth area are damaged such that the inside of the appliance is freely accessible. Contact your local Service Force centre, in order to avoid hazard. All sides of the dishwasher must never be drilled to prevent damage to hydraulic and electric components. WARNING! For electrical and water connection carefully follow the instructions given in specific paragraphs. Control panel and functions In this fully integrated appliance the controls are located on the top of the door. When selecting a washing programme, the door needs to be slightly open. On-Off button End light Programme/Cancel button IMPORTANT! Always remember that when performing operations as: -selecting a washing programme, -deactivation/activation of the audible signals, -setting the water softener, the appliance MUST be in setting mode: Press On-Off button, no programme lights are illuminated and End light flashes = appliance in setting mode. Press On-Off button, a programme light is illuminated and End light is illuminated with fixed light = last performed programme still set. In this case the programme has to be cancelled (see instructions “Cancel a washing programme in progress”). Programme/Cancel button Starting the washing programme: 1. Press the On-Off button. 2. Press the Programme/Cancel once, the light of the last performed washing programme illuminates and the End light flashes. 3. Press the Programme/Cancel as many times as necessary to illuminate the light corresponding to the desired programme. 4. Close the dishwasher’s door, the programme will start automatically. IMPORTANT! Once the programme has started, if you want to change the selection made you must cancel the washing programme in progress. Cancel the washing programme in progress: 1. Open the door. 2. Press and hold the Programme/Cancel button until the light of the running programme turns off and the End light is flashing. 3. Release the Programme/Cancel button. 4. Switch off the machine by pressing the On-Off button or select a new washing programme (check that there is detergent in the detergent dispenser. Programme/Cancel button Starting the washing programme: 1. Press the On-Off button. 2. Press the Programme/Cancel once, the light of the last performed washing programme illuminates and the End light flashes. 3. Press the Programme/Cancel as many times as necessary to illuminate the light corresponding to the desired programme. 4. Close the dishwasher’s door, the programme will start automatically....