Iniciar sesión:
Votos - 2, Puntuación media: 3.5 ( )

Manual de usuario GE, modelo 165D4700P381

Fabricar: GE
Tamaño del archivo: 2.43 mb
Nombre del archivo: e245a9a2-6b69-4a3f-b9da-11a3ae4d32c9.pdf
Idioma del manual:enfr
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


¦ Do not abuse, sit on or stand on the door or dish rack of the dishwasher. ¦ Do not allow children to play around dishwasher when opening or closing door due to the possibility of small fingers being pinched in door. ¦ Do not discard a dishwasher without first removing the door of the washing compartment or the door latch. ¦ Do not store or use combustible materials, gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. ¦ Do not allow children to play with, on or inside this appliance or any discarded appliance. READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY. SAVE THESE INSTRUCTIONS 3 Operating Instructions Safety InstructionsConsumer Support Troubleshooting Tips About the dishwasher control panel. You can locate your model number on the tub wall just inside the door. Throughout this manual, features and appearance may vary from your model. 1 26 Front-Control Dishwashers * 3 45 5 62 43 1Top-Control Dishwashers Control Settings 1 Status Indicator Lights (Indicators vary by models) The Status display tells you what is happening while the dishwasher is in operation and may flash, indicating a malfunction. The lights will come ON indicating the sequence of the dishwasher operation. LOW DETERGENT Displayed when the SmartDispenseTM needs to be refilled with liquid or gel automatic dishwasher detergent. NOTE: If you are not using SmartDispenseTM and you want to turn the LOW DETERGENT LED light off, press the ADDED HEAT pad 5 times within 3 seconds. You will hear 3 beeps; then the light will go off. You can turn the light back on by pressing the ADDED HEAT pad 5 times within 3 seconds. SENSING Displayed while the Clean SensorTM is measuring the amount of soil and temperature of water. The dishwasher will adjust the selected cycle to achieve optimal performance. ADD-A-DISH Displayed during prewash, indicating that dishes added now will still be cleaned. WASHING Displayed during prewash, main wash and rinse periods. RINSING Displayed during rinse periods. DRYING Displayed during HEATED DRY. SANITIZED Displayed when cycle has met sanitization conditions. 2 3 CLEAN Displayed when a wash cycle is complete. Time Remaining Display (on some models) During operation, the display shows the minutes remaining until the cycle is complete. The display may adjust the remaining time while the Sensing light is on. The time displayed at the start of each cycle may change from the factory setting as the unit customizes itself to home use. During a delay start, the display will show hours of time remaining until the cycle starts. Wash Programs (Selections) Front-Control Dishwashers: Press the pad for the desired wash cycle. Top-Control Dishwashers: Use the arrow pads to scroll through the wash cycles. NOTE: All cycle times and water usage information contained in the following section are approximate values. Actual results will depend on several factors, including but not limited to inlet temperature, household water pressure and amount of soil in the wash water. The light above or next to the selected pad will be ON to indicate which WASH CYCLE has been selected. 4 ge.com 3 Wash Programs (Selections) (continued) ANTI-BACTERIA Heavy 8.8 gal., 105 min. Medium 7.5 gal., 95 min. Light 6.3 gal., 85 min. This cycle raises the water temperature in the final rinse to sanitize your dishware. The cycle length will vary depending on the temperature of your inlet water. NOTE: The Anti-Bacteria cycle is monitored for sanitization requirements. If the cycle is interrupted during or after the main wash portion or if the incoming water temperature is so low that adequate water heating cannot be achieved, the sanitizing conditions may not be met. In these cases, the sanitized light will not illuminate at the end of the cycle. NOTE: NSF-certified residential dishwashers are not intended for licensed food establishments. DEEP CLEAN 9.6 gal., 111 min. (on some models) This cycle is meant for heavily soiled dishes or cookware with dried-on or baked-on soils. This cycle may not remove burned-on foods. Everyday dishes are safe to be used in this cycle. NOTE: On some models, the STEAM PRE-WASH enhancement will be automatically selected when the DEEP CLEAN cycle is chosen, and cannot be de-selected. COOKWARE/ Heavy 10.0 gal., 80 min. POTS & PANS Medium 8.8 gal., 70 min. (on some models) Light 7.5 gal., 60 min. This cycle is meant for heavily soiled dishes or cookware with dried-on or baked-on soils. This cycle may not remove burned-on foods. Everyday dishes are safe to be used in this cycle. NORMAL WASH 5.0–8.8 gal., 47–90 min. This cycle is for medium/heavily soiled dishes and glassware. Cycle time and water usage are approximate values. Results will depend on several factors, including but not limited to inlet temperature, household water pressure and amount of soil in the wash water. SPEED CYCLE 7.5 gal., 35 min. (on some models) This cycle is for everyday dishes and glassware. HAND/GENTLE 7.5 gal., 35 min. (CH...


Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría