Votos - 4, Puntuación media: 4.3
(
)
)
|
Resumen del manual
The intelligent evaluation of these data allows the early detection of spreading fires. The detector complies with Class A1R and can be used up to a room height of 7.5m. Addressable conventional technology is used for alarm transmission to the fire detection control panel. The detector addressing can be achieved in 2 ways: • A detector with an Address Module NG58-1 can be individually identified by the suitable control panel. • An address, which has been stored in the detector Specifications Supply through the detector line voltage Current consumption typ. 80|jA (quiescent) Alarm temperature 58°C (maximum-heat component) Operating temperature max. +45°C Ambient temperature -30°C to +70°C Relative humidity 5 - 95% (no condensation) Dimensions 0 x H 102 x 43 (mm) Colour cream Weight 75g Approval VdS G202014 Order number 242040 Order name Thermal ROR Detector/Conv./300/SS 5351E by means of the Remote Programming and Test Unit, is displayed on the Zonal Display Unit S300ZDU. A test activation of the detector can be carried out using the Remote Test Unit ECO1000RTU. In addition to the test activation of the detector, the Remote Programming and Test Unit S300RPTU can also be used to set and display the following detector parameters: • the detector address, and • the date of the previous maintenance. The detector can be attached to various detector bases and it can be protected against theft. Building Safety. Building Security. © LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX. +43 1 52114-27 OFFICE@LST.AT • WWW.LST.AT • ALL RIGHTS RESERVED 5351E DBL LST EN 0804.PDF • PAGE 1...