Votos - 1, Puntuación media: 4
(
)
)
|
Resumen del manual
Therefore, immediate response to a fire is imperative. The main objective of fire detection control panel Series BC216 is to alarm and to react in time and, consequently, save lives and protect property. For decades LST have focused their aims to undertaking unrivaled efforts in order to realize new innovations in the security area. Research, development and production are loca- The fire detection control panel BC216–1S is designed to be used in small systems with only one ADM loop. It comprises an already completely mounted unit which includes all basic components that are needed for the operation of a 1-loop fire detection control panel. Slot 1 is by default equipped with a Loop Interface LIF64-1 for the connection of an ADM loop, slot 2 is inoperable. The ADM loop principle offers intelligent analogue ring- bus technology with bi-directional data transfer. The loop provides for the software-aided administration of up to 198 physical address points in a maximum of 128 detector zones. Conventional detectors can be integra ted within LST premises, thus guaranteeing flexible and reliable individual solutions. Using a 32-bit multiprocessor system, the fire detection control panel Series BC216 ensures topmost efficiency and speed – prerequisites for saving lives and minimizing damage to property. ted into the ADM loop, if required, by means of conventional zone modules. Depending on the respective system, a Fire Brigade Interface FWI2-1, a Fire Brigade Interface Additional Board FWZ2-1, an LED-Display Field LAB48 as well as further optional componentries can be installed in addition. Easy parameterisation on the control panel‘s display and operating unit, via a PC keyboard, or by means of a PC software enables you to tailor the control panel to your individual requirements. Building Safety. Building Security. A © LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27 BC216-1S_DBL_LST_EN_0804.PDF • PAGE 1 OFFICE@LST.AT • WWW.LST.AT • ALL RIGHTS RESERVED Clear Concept Clear Concept Being the smallest version of the fire detection control panel Series BC216, the BC216-1S is designed for use in small systems and provides the following features: • One Loop Interface LIF64-1 for the connection of detectors and modules in ADM loop technology is installed in the control panel by default. Depending on the parameterisation, either the Apollo/Discovery protocol or the System Sensor/200 protocol is used to achieve bi-directional data transfer. • The optional Fire Brigade Interface FWI2-1 serves for the connection of 2 independent transmitting devices for a direct interconnection to a designated alarm respondent (e.g., the fire brigade) as well as for the connection of a country–specific fire brigade control unit. By using the Fire Brigade Interface Additional Board FWZ2-1, a line supervision for both of the transmitting devices is accomplished. • The BC216-1S is able to control up to 126 detectors or modules, 128 detector zones, 128 actuations, 10 transmission devices and 99 alarming devices. • Customizable outputs and logical combinations of detectors and detector zones for the activation of external controls and alarming devices facilitate maximum flexibility. Thus, no additional expenses arise for external relays, logic gates or timers. Thanks to the wide range of parameterisation possibilities, individual requirements even under the most difficult ambient conditions can be combined into a reasonable fire protection strategy. • By integrating input and output modules on any position in the loop you can realize enablements or disablements as well as control tasks in your system without having to care for additional wires. • The free combination of detectors and modules into logic sectors allows for the joint operation of defined parts of the system. Up to 199 sectors can be controlled by the BC216-1S. • The use of unshielded loop cables allows for cost- saving and uncomplicated installation as well as for the possibility of reusing the existing cabling. • The LC text display shows events with the full information such as floor, room identification as well as date and time. This allows for quick and targeted reaction in the event of a fire as well as for easy maintenance. • An event memory allows for the display of the latest 500 events at any time, including all required information. Thus, all system conditions and user operations that occurred are documented in a clearly laid out way. • At a central processing board failure, the diversified redundancy concept ensures secure alarm recognition. • The processor-monitored power supply ensures permanent surveillance and charging of the batteries. This way, even during a power failure the untroubled and uninterrupted operation (for more than 72 hours depending on the design) is guaranteed. • Three hierarchized authorization levels for operation and parameterisation facilitate a high degree of security against unauth...