Votos - 3, Puntuación media: 3.3
(
)
)
|
Resumen del manual
Accessori BEAMLRK, BEAMMMK, BEAMSMK Suitable for Beam Smoke Detectors Series 6500 Three-part reflector set increases the detection range to 100m Multi-mount kit with three-dimensional angle adaptation Surface-mount kit fig. A cM fig. B fig. C Reflector BEAMLRK 1 The Reflector BEAMLRK (fig. A) increases the maximum range of the Beam Smoke Detector Series 6500 to 100m. The package contains 3 parts. These three Material parts and the reflector included with the detector are put together, thus resulting in one large reflector. Plastic Dimensions W x H x D 200 x 230 x 10 (mm), one piece Dimensions W x H 400 x 460 (mm), entire reflector area Order number 244024 Order name Reflector/6500/75-100M BEAMLRK 9i Multi-Mount Kit BEAMMMK The Multi-Mount Kit BEAMMMK (fig. B) is used for atta- sloped. If the reflector is installed by means of the multi-ching the Beam Smoke Detector Series 6500 or the mount kit, the range is limited to 70m. reflector under difficult conditions, e.g., if the ceiling is Specifications Order number 244025 Order name Multi-Mount Kit/6500 BEAMMMK Building Safety. Building Security. © LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX. +43 1 52114-27 OFFICE@LST.AT • WWW.LST.AT • ALL RIGHTS RESERVED BEAM-ZBH DBL LST EN 0804.PDF • PAGE 1 Surface-Mount Kit BEAMSMK The Surface-Mount Kit BEAMSMK (fig. C) is used for surface mounting of the Beam Smoke Detector Series 6500 or for the mounting of the detector in combination with the Multi-Mount Kit BEAMMMK. Specifications Material Plastic Dimensions W x H x D 178 x 230 x 51 (mm) Order number 244026 Order name Surface-Mount Kit/6500 BEAMSMK Building Safety. Building Security. © LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52H4-0 • FAX +43 1 52114-27 OFFICE@LST.AT • WWW.LST.AT • ALL RIGHTS RESERVED BEAM-ZBH DBL LST EN 0804.PDF • PAGE 2...