Votos - 4, Puntuación media: 3.3
(
)
)
|
Resumen del manual
AC/DC smoke alarms offer added protection in the event of a power failure or a drained battery. • Unique power connector prevents interconnection with incompatible smoke alarms or security systems. • This smoke alarm may be interconnected with as many as 11 addi- tional Firex model AD, ADC, PAD, FADC and FPAD smoke alarms, and/or as many as 6 Firex model ADH heat alarms for a total of not more than 18 interconnected devices. • Optional tamper-resist feature can serve as a safeguard against tampering. • Unique “battery missing” lockout. The smoke alarm battery door will not close if a battery is not in the battery pocket. • Separate green and red LEDs indicate that the smoke alarm is receiving AC power, working under normal operation, or in alarm. • Loud alarm horn—85 decibels at 10 feet—sounds to alert you to an emergency. • This alarm incorporates the internationally recognized horn signal for evacuation. During alarm mode, the horn produces three short beeps followed by a 2 second pause and then repeats. This pat- tern is somewhat different than the previous alarm sound, which continually beeped. • Test button checks smoke alarm operation. IMPORTANT SAFETY INFORMATION PLEASE READ AND SAVE THESE INSTRUCTIONS W ARNING ©2005 Invensys Controls Americas 120V AC Smoke Alarm with 9V Battery Back-up STATEOF CALIFORNIA STATEFIRE MARSHAL LIS T ING SER V ICE Photoelectric alarms are generally more effective at detecting slow, smoldering fires that smolder for hours before bursting into flame. Sources of these fires may include cigarettes burning in couches or bedding. Ionization alarms are generally more effec- tive at detecting fast, flaming fires that consume combustible materials rapidly and spread quickly. Sources of these fires may include flammable liquids or paper burning in a waste container. However, both types of alarms provide adequate detection of both types of fires. If you desire the earliest detection of both smoldering fires and fast flaming fires, you should install smoke alarms that combine both photoelectric and ionization sensing technologies in one unit. ! ©2005 Invensys Controls Americas 120V AC Smoke Alarm with 9V Battery Back-up STATEOF CALIFORNIA STATEFIRE MARSHAL LIS T ING SER V ICE Photoelectric alarms are generally more effective at detecting slow, smoldering fires that smolder for hours before bursting into flame. Sources of these fires may include cigarettes burning in couches or bedding. Ionization alarms are generally more effec- tive at detecting fast, flaming fires that consume combustible materials rapidly and spread quickly. Sources of these fires may include flammable liquids or paper burning in a waste container. However, both types of alarms provide adequate detection of both types of fires. If you desire the earliest detection of both smoldering fires and fast flaming fires, you should install smoke alarms that combine both photoelectric and ionization sensing technologies in one unit. ! 110-1074C PHOTOELECTRIC MODEL FPAD PLEASE READ AND SAVE THIS MANUAL Installer: Please leave this manual with the product. • This smoke alarm requires constant 120-volt, AC power AND a working 9-volt battery to operate properly. This smoke alarm WILL NOT work if AC power is not connected or has failed or been interrupted for any reason AND the battery is removed, drained or improperly connected. DO NOT use any other kind of battery except as specified in this manual. DO NOT connect this smoke alarm to any other type of smoke alarm or auxiliary device, except those listed in this manual. • DO NOT remove or disconnect battery or turn off AC power to quiet unwanted alarms. This will remove your protection. Open windows or fan the air around smoke alarm to silence it. • The Push-to-Test button accurately tests all smoke alarm functions. DO NOT use any other test method. Test smoke alarm weekly to ensure proper operation. • This smoke alarm should be installed only by a licensed, qualified electrician. Observe and follow all local and national electrical and building codes for installation. • This smoke alarm IS NOT designed to be the PRIMARY protection for buildings that require complete fire alarm systems. Buildings of this type include hotels, motels, dormitories, hospitals, nursing homes, and group homes. This is true even if they were once single family homes. However, this 1 smoke alarm MAY be used inside individual rooms as SUPPLEMENTAL protection. • Smoke alarms must not be used with detector guards unless the combination of alarm and guard has been evaluated and found suitable for that purpose. • Install a smoke alarm in every room and on every level of the home. Smoke may not reach the smoke alarm for many reasons. For example, if a fire starts in a remote part of the home, on another level, in a chimney, wall, roof, or on the other side of a closed door, smoke may not reach the smoke alarm in time to alert household members. A smoke alarm will not promptly detect a fire EXCEPT in the area...
Otros modelos de este manual:Detector de incendios - ADC (142.52 kb)
Detector de incendios - FPAD (142.52 kb)
Detector de incendios - PAD (142.52 kb)