Votos - 5, Puntuación media: 3.6
(
)
)
|
Resumen del manual
The monitors provide 0.5 Amp dry contract relay that is activated when the concentration of gas exceeds the factory-set (and user-adjustable) level. A TTL signal can be user configurable to interface with Sierra Monitor’s alarm panels. This signal may be used to activate a remote alarm, fan or process controller. The standard configuration has a normally operating open relay but a fail-safe normally operating closed relay is field selectable. A durable, cast aluminum explosion-proof enclosure houses the sensor electronics. The enclosure provides sealing for hazardous areas - Class I, Division 1, Groups C, D. The sensor with porous metal cover is assembled in an aluminum housing that screws directly into the electronics enclosure. The cover both protects the sensor and acts as a flame-arrestor. The monitor can be installed up to 500 feet from the power source. Semiconductor-Type Sensor A solid-state semiconductor-type sensor and associated electronic circuitry ensure trouble-free, long-term operation. There are no pumps, filters, or chemical cells to replace or maintain. Except periodic calibration to verify the alarm setting, no attention is required after installation. The user may adjust the alarm level by using calibration gas with concentration equal to the alarm level. Features Model 20X Series Gas Sensor Monitors Model 201 - Combustible Gas Model 203 - Hydrogen Sulfide Model 206 - Carbon Monoxide Remote Alarm Available If a remote alarm is desired (required for 20X-00), the Model 2102 Dual ChannelAlarm Panel can be connected up to 500 feet away from the monitors. Model 201 - Combustible Gas The Model 201 can detect a wide range of combustibles. Typical applications include combustible gas monitoring in manholes, tanks, natural gas fields, parking garages and vehicle maintenance facilities, sewage treatment plants, laboratories, chemical plants, and more. Benefits ■ Explosion-proof enclosure Can operate continuously in work areas where hazardous gases could be present ■ No chemical cells to replace, no periodic Maintenance free operation maintenance required other than routine calibration ■ All the electronic circuitry needed to operate Quick easy installation and connection to alarm panel the monitor contained in a compact unit Sierra Monitor Corporation 1991 Tarob Court Milpitas, California 95035 (408) 262-6611 (800) 727-4377 Fax: (408) 262-9042 Model 203 - Hydrogen Sulfide The Model 203 can be used in such typical applications as wastewater treatment plants, laboratories and chemical plants. Model 206 - Carbon Monoxide The Model 206 Carbon Monoxide Gas Sensor Module can be used to provide an early warning of Carbon Monoxide accumulation in tanks, laboratories, chemical plants, parking garages, vehicle test facilities and more. SPECIFICATIONS SENSOR TYPE: Solid-State Metal Oxide Semiconductor RANGE: Model 201 Model 203 Model 206 RESPONSE TIME: Model 201 Model 203 Model 206 PERIODIC MAINTENANCE: OPERATING TE...
Otros modelos de este manual:Detector de incendios - Gas Sensor Monitors 203 (150.44 kb)
Detector de incendios - Gas Sensor Monitors 206 (150.44 kb)
Detector de incendios - Gas Sensor Monitors 20X (150.44 kb)