Votos - 3, Puntuación media: 3.3
(
)
)
|
Resumen del manual
Supplied with locking plug and 2m of cable. Vibration Pad Socket: Locking socket (JST type VHR-2N) provided for vibration pad. Output 12V/200mA is pulsed in alarm for greater effect. Wiring is monitored - if vibration pad is not connected or if it is open circuit the strobe will flash. • Green mains indicator illuminates to show mains power is present • Red battery indicator flashes when mains power is off to show that the unit is running on battery only power. The red indicator goes off when the battery is fully depleted • The slide switch on the control panel disconnects the mains and battery power from the control panel and extinguishes both the red and green indicators • The Test button on the side of the control panel checks the operation of the strobe light and vibrating pad on all models. In addition, it activates the smoke alarm and any other RadioLINK control devices on Ei169RF and Ei176RF models • When any of the smoke alarms are activated the control panel will flash the strobe light once per second and also activate the vibrating pad • The Auxiliary socket allows the connection of an additional strobe, vibrating pad or to trigger a radio frequency pager Aux Socket: Locking socket for extra strobe (Ei178) or vibration pad etc. provides 12V/200mA in alarm. Smoke Alarm Wiring (Not Ei176RF & Ei169RF): Low voltage cable (10m) is supplied hard-wired to the panel for connection to the smoke alarm. Wiring is monitored - if it is not connected or if it is open/short circuited the strobe will flash and vibration pad will turn on. Clock Input: Used with alarm clocks, so only one vibration pad is needed under mattress/pillow. 5 to 24 volts (AC or DC mains isolated) will turn on vibrator pad only i.e. no strobe. Socket takes 3.5mm mono jack plug. Interconnection: Up to 12 smoke alarms can be interconnected. Control Devices: RadioLINK models Ei169RF and Ei176RF can be connected to RadioLINK Test & Hush Switch Ei411 and Remote Relay Module Ei428 for signalling to a Warden Call System. Extra Features Ei411 - Test & Locate Switch A completely wire-free, wall mounted switch designed for use with the Ei169RF and Ei176RF models. Allows easy control of false alarms without having to reach up to the smoke alarm. Ei428 - Remote Relay Module Ideal for use with the Ei169RF and Ei176RF models to signal an alarm to a Warden Call System. The module is wire-free except for a connection to the mains supply. Aico Ltd, Mile End Business Park, Maesbury Road, Oswestry, Shropshire SY10 8NN Tel: 0870 758 4000 • Fax: 0870 758 4010 • e-mail: enquiries@aico.co.uk • Customer Service Helpline: 0870 758 4000 Aico Ltd is a wholly owned E & OE As our policy is one of continuous development, we reserve the right to amend designs and specifications subsidiary of Ei Electronics without prior notice. Every care has been taken to ensure that the contents of this document are correct at the time of publication and we shall be under no liability whatsoever in respect of such contents. SASD 0306 Issue 1 ...
Otros modelos de este manual:Detector de incendios - Ei176RF (106.02 kb)