Votos - 5, Puntuación media: 4.6
(
)
)
|
Resumen del manual
IR REMOTE SILENCE Point and click any remote control to silence unwanted alarms. EZ VIEW BACKLIT DIGITAL DISPLAY TWO SILENCE FEATURES Silences low battery chirp for up to eight hours or silence nuisance alarm for several minutes. END OF LIFE TIMER Provides audible and visual notice when alarm needs to be replaced. CAT. GCO1B 120V AC Plug-in with 9V Battery Backup CO & EXPLOSIVE GAS COMBO ALARM First Alert Model GCO1 is a 120V AC plug-in with battery back-up single station carbon monoxide and explosive gas (propane and natural/methane) combination alarm specifically designed for residential and institutional applications including sleeping rooms of hospitals, hotels, motels, dormitories, and other multifamily dwellings as defined in standard NFPA 101. Model GCO1 has been fully tested and complies with, UL1484, UL2034 and other agencies that model their codes after the above agencies. It meets building codes where 120V AC plug-in digital display with battery back-up carbon monoxide and explosive gas combination alarms are required. First Alert Model GCO1 is a state of the art carbon monoxide and explosive gas combination alarm designed to provide early warning of a carbon monoxide, propane or methane gas danger. It features an advanced electrochemical CO sensor and a metal oxide explosive gas sensor with an EZ view backlit digital display. It plugs in easily into any standard 120V AC outlet. The line cord allows for convenient mounting options where methane requires unit to be mounted up high and propane should be mounted low. Carbon monoxide mounting location is not height sensitive as CO disperses evenly throughout the house. The peak level function allows for easy viewing of highest gas levels detected. It has a 9V alkaline battery backup and a single button test/silence button. This alarm has two silence features. Low Battery Silence: Temporarily silence the low battery chirp for up to eight hours. Alarm Silence: Silence alarm for several minutes. The alarm can also be silenced by using most Infrared (IR) remote controls. The End of Life timer provides audible and visual notice when alarm needs to be replaced. Battery installation and removal can occur while the unit is mounted to the wall or plugged into the electrical outlet via the swing up battery cover. Includes mounting anchors and screws. CO brkelectronics.com ARCHITECTURAL AND ENGINEERING SPEC INSTALLATION OF ALARM The explosive gas/CO combination alarm shall be a First Alert Model GCO1 and shall provide at a minimum the following features and functions: 1. An electrochemical CO sensor and a metal oxide explosive gas sensor. 2. The unit shall have a digital display with peak CO memory feature 3. The unit shall be capable of self restoring and provide an end of life timer. 4. 120V AC powered with a 9V alkaline battery backup and a solid state piezo horn rated at 85dB at 10 ft. 5. A visual green LED power-on indicator to confirm unit is receiving power. A visual red indicator to show unit is alarm. 6. A full function test button should check all alarm functions by simulating an explosive gas and CO condition, causing the unit to alarm. 7. Two Silence features - Low Battery Silence: Silence low battery chirp for up to 8 hours. Alarm Silence: Temporarily silence unwanted nuisance alarms. 8. An infrared remote (IR) feature to test and/or silence the alarm with most standard IR remote controls. 9. The unit shall be capable of operating between 40°F (4°C) and 100°F (38°C) and relative humidity between 10% and 95%. 10. The unit shall contain mounting hardware and shall be listed for wall mounting. 11. The unit shall at a minimum meet the requirements of UL1484, UL2034, NFPA 720, ICC. Installation of this alarm must conform to NFPA 720. Always check your local building codes. Follow all instructions for placement as outlined in the user’s manual. SHIPPING SPECS: TECHNICAL SPECS Individual Carton Dimensions 5.813 ”L x 2.938”W x 3.438”H Weight 0.69lbs. Cube 0.034 ft3 UPC 0 29054 00045 3 Master Carton Dimensions 9.125”L x 7.125”W x 6.313”H Master Pack 6 Weight 4.35lbs. Cube 0.238 ft3 UPC 600 29054 00045 5 Pallet Information Cases per Layer 27 Number of Layers 7 Cases per Pallet 189 Units per Pallet 1,134 Cube 55.2 ft3 Weight 887 lbs. ©2009 BRK Brands, Inc. a Jarden Corporation Company (NYSE: JAH) 3901 Liberty Street Road Aurora, IL 60504-8122 All rights reserved First Alert is a registered trademark of the First Alert Trust BRK is a registered trademark of BRK Brands, Inc. CM2914 THE PARTS OF THIS GAS/CO ALARM 1. Test/Silence button & remote control sensor 2. Power Light (GREEN) 3. Display 4. Alarm Horn (behind cover) 5. Display Button: Press to recall highest CO level recorded. 6. 9V Battery compartment 3.1" TOP VIEW SIDE VIEW BACK VIEW 2.5" Alarm Dimensions: 3.1”H x 5.7"L x 2.5"D Weight: 9.6 oz. Operating Voltage: 120V AC with 9V Alkaline Battery Backup Temperature Range: 40F (4C) to 100F (38C) Humidity Range: 10% to 95% relative humidity (RH) Audio Alarm: ...