Votos - , Puntuación media: ( )

Manual de usuario BRK electronic, modelo CSA6.19

Fabricar: BRK electronic
Tamaño del archivo: 97.43 kb
Nombre del archivo: 3912da49.pdf

Idioma del manual:

El documento se está cargando, por favor, espere

Descargar ahoraCerca

El documento se está cargando, por favor, espere

Descargar ahoraCerca

The RM4 Relay is intended for use with BRK and First Alert Smoke, Heat and Carbon Monoxide Alarms. The relay contacts will activate whenever any interconnected alarm sounds. The relay contacts will automatically deactivate a few seconds after the alarm stops sounding. The RM4 may be wired next to an AC alarm or from a remote location. This relay must be installed in a junction box. Interconnects smoke alarms, carbon monoxide alarms and heat alarms with: • Lights • Bells • Door Closers • Sirens • Exit Signals • Escape Lights • Exhaust Fans • Other Auxiliary Devices RM4 This accessory relay is designed to activate auxiliary devices such as bells, lights and door closers. The RM4 Relay is intended for use with BRK and First Alert Smoke, Heat, and Carbon Monoxide Alarms. Alarm AC Power Auxiliary Device AC Power ARCHITECTURAL AND ENGINEERING SPEC Dimensions: 3.5 L x 1.5 H Weight: 2.2 oz Operating Voltage: 120V AC 60Hz Operating Current: .02 amps (standby/alarm) Temperature Range: 40°F (4°C) to 100°F (38°C) Humidity Range: 10% to 90% relative humidity (RH) Interconnections: Up to 18 units of First Alert or BRK Smoke, CO and Heat Alarms. Maximum of 12 smoke alarms. See user's manual for details. Listing: Meets UL217, UL2034, UL539,ULC S-531, CSA6.19 and ULCS-530 for accessories. To install this relay to an alarm, connect the power wires as listed below. See diagram for connections. Note: If wiring the relay remote from the alarm, use a maximum of 1000 feet [300 meters] of #18AWG or larger wire rated at least 300V. ALARM CONNECTION RELAY BLACK WIRE (HOT) BLACK WIRE WHITE WIRE (NEUTRAL) WHITE WIRE ORANGE WIRE (INTERCONNECT) ORANGE WIRE Now connect the accessory to be activated by the relay to the relay's switch contact wires as listed below. (Use wiring appropriate to the auxiliary device being controlled.) NOTE: Since voltage is present on all relay contact wires at some time during operation, the installer must properly insulate any unused relay contact wire. BROWN WIRE: HOT CONTACT TO AUXILIARY DEVICE GRAY WIRE: NORMALLY CLOSED CONTACT BLUE WIRE: NORMALLY OPEN CONTACT SHIPPING SPECS Individual Bag Dim. (Approx.) 6.25"L x 1.50"W x 5.00"H Weight Cube UPC 0.16 lbs. 0.03 ft3 0 29054 00057 6 Master Carton Dimensions 10.25"L x 4.75"W x 6.38"H Master Pack 12 Weight 2.1 lbs. Cube: 0.19 ft3 I2of5: 100 29054 00057 3 Pallet Information Cases per Layer 35 Number of Layers: 6 Cases per Pallet: 210 Units per Pallet: 2,520 Cube: 54.7 ft3 Weight: 695 lbs. CONTACT RATINGS (MAXIMUM): VOLTAGE RESISTIVE MOTOR 120V AC 15 AMP 1/3 H.P. 30V DC 15 AMP After installation, test the interaction of the auxiliary device with the alarm by pressing the alarm test button. THE PROFESSIONAL STANDARD brkelectronics.com ©2009 BRK Brands, Inc. a Jarden Corporation Company (NYSE: JAH) 3901 Liberty Street Road Aurora, IL 60504-8122 All rights reserved First Alert is a registered trademark of the First Alert Trust BRK is a registered tra...