Bacharach, Inc. shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. No part of this document may be photocopied, reproduced, or translated to another language without the prior written consent of Bacharach, Inc. Copyright © 2003 . 2006, Bacharach, Inc., all rights reserved. BACHARACH® is a registered trademark of Bacharach, Inc. All other trademarks, trade names, service marks and logo

The default value is 100 feet. Note that setting this value to “0” causes the zone to be bypassed during normal operation, and the word “DISABLED” in appear in place of the zone’s PPM reading in the Zone Screen (Page 44). 1. Press the DISTANCE key to adjust the distance value. 2. Use the LEFT/RIGHT cursor keys to move across the entry field and the UP/DOWN cursor keys to modify the setting. 3. Press ENTER to accept the new entry or QUIT to revert to the previous setting. Instruction 3015-4275 Av

This steady state combustion analyzer is a room air CO test instrument, flue gas CO tester, dual channel digital thermometer (up to 999°F), digital manometer and is capable of measuring eight different fuels. Phone: 1-800-736-4666 Website: E-mail: help@mybacharach.com Specifications Product Features Five Tools in ONE! • Combustion and efficiency analyzer - (8) different fuels • Room air CO test instrument • Flue gas CO tester (CO air free) • Dual channel digital thermometer • Digital

All other trademarks, trade names, service marks and logos referenced herein belong to their respective companies. A Instruction 24-9448 Contents Contents 1 Introduction..................................1-1 1.1 PCA 2 General Description...............................1-1 1.2 Sales Combo & Model Configurations......................1-2 1.3 Features & Benefits....................................1-4 1.4 Operational Overview...................................1-5 1.5 Connector Descriptions..

(8.2 kg) Warranty Two year full warranty on instrument The H25-IR instrument, along with its probe type and hose length, is ordered by specifying 3 codes. The codes Ordering Information ProbesStandard Probe, LED & Button Contains a button that can be configured to either zero the unit or switch between the instrument’s search and measure modes. Also contains an LED that provides visual feedback. The LED can be configured to blink with increasing frequency as the measured leak rate increases or l

The instrument can be used to locate and quantify leaks as well as log and totalize the entire group of leaks in a system to ensure quality assurance compliance. The unit is capable of detecting 29 of the most commonly used refrigerants and halogen gas compounds. Additional gas-specific models are available for R-600a and SF6. Industrial Refrigerant Leak Detector Infrared Technology Fewer False Alarms Fast Response Time • Utilizes Infrared Technology for Detection ensures long sensor life and hi

2008 Product Leadership • Training • Service • Reliability F1 F2 F3 RUN ESC HOLD PWR W ARRANT Y Bacharach, Inc. warrants to Buyer that at the time of delivery this Product will be free from defects in mater ial and manufac ture and will conform substan tially to Bach arach Inc.’ s ap plicable spec i fi ca tions. Bacharach’s li a bil i ty and Buyer’s remedy under this warranty are lim it ed to the repair or replacement, at Ba charach’s option, of this Product or parts thereof returned to Seller a

OHMS=75.0 mW=450.0 5.4.5.4 DIGIPOT Adjustment 1. Press ESC twice to return to the Main menu. From the Main menu, select FACTORY > DIGIPOT to display the DIGIPOT screen. IMPORTANT! When performing the following Step, the instrument must be sampling fresh air (zero gas) when adjusting the DIGIPOT value. 2. Use the Up and Down buttons to adjust the DIGIPOT value until the IR VOLT reading is 4.2000 ±0.0500 volts. Press ENT to save the new DIGIPOT value. IMPORTANT! If adjusting the DIGIPOT does not r