Iniciar sesión:
Votos - 5, Puntuación media: 4.2 ( )

Manual de usuario Lumex Syatems, modelo 6486A

Fabricar: Lumex Syatems
Tamaño del archivo: 201.25 kb
Nombre del archivo: ProductAdditionalInfoItemOriginal2118.pdf
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


If the raised toilet seat is not properly assembled and installed, personal injury and damage to the raised toilet seat could result. WARNING: If components are damaged or missing, contact your dealer immediately. DO NOT use substitute parts. Use only Lumex replacement parts. Non-Lumex replacement parts could cause personal injury and damage to the raised toilet seat. WARNING: This product has a weight limit of 300 lb. WARNING: GF Health Products, Inc. assumes no responsibility for any damage or injury caused by improper assembly, installation or use of this product. 6487RA6486Aflangepaddleknob INSTALLATION 1. Remove toilet seat from carton and protective packaging. 2. If installing Model 6486A, proceed to step 3. If installing Model 6487RA, follow steps a-e to install arms, then proceed to step 3. a. Remove arms from box. b. Insert each end of arm into the raised toilet seat as shown in center picture above. c. Push arm downward until you hear it click into place. d. Pull arm upward slightly to secure proper installation. If loose, repeat step c. e. Repeat steps b-d for other arm. 3. Lift lid and seat of toilet. This raised toilet seat fits most current, standard toilets. 4. Place raised toilet seat on toilet bowl rim, hooking rear flanges under rear edge of bowl. Ensure paddle is back far enough to clear inner rim of bowl. If not, turn knob counterclockwise. 5. Ensure raised toilet seat rests flat on toilet bowl rim; straighten unit on bowl rim. 6. To tighten, rotate adjustment knob clockwise. Push unit back against rear of toilet rim while tightening knob. When you feel resistance, turn an additional 1/8 turn to snug. If top rear of unit hits the toilet seat or lid, you must remove the seat and lid for proper installation. Note: The adjustment knob head must be flush with the front of the toilet seat for proper fit. On smaller bowls, if paddle is moved to rear of its travel, the knob may pop out of its original position; the knob will automatically re-engage when you re-tighten. Note: Do not force the knob to turn. If necessary, jiggle the knob a little to start the threads. GF Health Products, Inc. is not responsible for typographical errors. Packaging, warranties, products and specifications are subject to change without notice. Graham-Field and Lumex are registered trademarks of GF Health Products, Inc. © February 2009 GF Health Products, Inc. • 2935 Northeast Parkway • Atlanta, GA 30360 • tel 800-347-5678 • fax 800-721-0601 • 2 GF0500058RevA09 7. The raised toilet seat should now be securely installed on the toilet bowl. To ensure that you have a proper fit, intentionally shake the raised toilet seat to ensure proper placement and fit. The raised toilet seat should not move; if it does, re-install. WARNING: Ensure that the raised toilet seat is installed as described. If the raised toilet seat is not properly assembled and installed, personal injury and damage to the raised toilet seat could result. REMOVAL 1. Rotate kn...

Otros modelos de este manual:
Baño - 6487RA (201.25 kb)

Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría