Votos - 3, Puntuación media: 4 ( )

Fabricar: American Standard Tamaño del archivo: 1.69 mb Nombre del archivo: Idioma del manual:

The cycle will start on white. • Turn off and on within 3 seconds; it will change to slow rainbow cycle and so on per the display color table shown above. 754532-100 Rev. A 40 Operation: Combination Tub with Lights (continued) EXITING THE BATH • Be sure to turn off the air blower before draining bath. • Open drain by rotating drain knob clockwise. DRYING CYCLE OPTIONS STANDARD DRYING CYCLE An automatic drying cycle will start 20 minutes after the blower is turned off. The blower LED blinks while waiting for the purge cycle. 24H PROGRAMMABLE DRYING CYCLE The system must be stopped prior to activation or deactivation. Activation: Determine at which time you wish to purge to activate. At that precise time, press and hold the second button on the keypad for 5 seconds, all LEDs will flash twice. The purge cycle will now start at the programmed time every 24 hrs. In the event of a power failure, the program will be automatically deactivated. Deactivation: Press and hold the second button on the keypad for 5 seconds, all LEDs will flash once to confirm deactivation. Your American Standard whirlpool is designed to give you many years of pleasure with reasonable care and maintenance. Your new acrylic bathtub is tough, durable and easy to care for. The colors have been formulated to match other American Standard fixtures and enhance your choice of bathroom decorations. The high gloss surface will retain its lasting luster with proper care and maintenance. CLEANING AND MAINTENANCE: • Always fill the tub with temperate water. Excessively hot water (greater than 130° F) may cause surface damage. • Remove bath mat after use and hang to dry. Allowing bath mat to dry in the tub may cause surface damage. • Clean after use with a mild liquid household detergent cleaner. Do not turn on jets when such cleaners are present. Do not use: Lestoil® Cleaner; Lysol® Disinfectant (spray or concentrate); or Lysol® Basin, Tub and Tile Cleaner; Windex® Cleaner; Mr. Clean® Cleaner; Dow® Disinfectant Bathroom Cleaner*; or other cleaning products in aerosol cans. HARSH CHEMICALS, SHARP AND ABRASIVE OBJECTS SHOULD NEVER BE USED ON ACRYLIC SURFACES • Do not use wire brushes, knives or sharp objects to remove stains or other surface blemishes. • Use of abrasive cleaners or powders will dull the surface. If the glossy surface looses its sheen, dulled areas can be partially restored by rubbing with a white automotive body polishing compound and waxing with a liquid wax. Do not wax surfaces where you walk or stand. • Do not allow nail polish remover, acetone, dry-cleaning fluid, paint remover, or other solvents to come into contact with the surface. • Clean the surrounding surface immediately after using caustic drain cleaners. Do not permit drain cleaner to enter circulation system. • Burning cigarettes will irreparably damage the surface of the whirlpool. CLEANING/PURGING THE CIRCULATION SYSTEM Once every month the circulating system must be purged and cleaned. Follow the steps outlined below: 1. Fill whirlpool with warm water and add two teaspoons of powdered automatic dishwasher (not laundry) detergent and one-half cup of household bleach to filled whirlpool. 2. Activate whirlpool system in accordance with operating instructions and run system for two minutes. 3. Drain and refill whirlpool with cold water. Circulate for five minutes. 4. Drain whirlpool completely after step 3 (above) is completed. For Troubleshooting and Repair Parts please log on to * Lestoil® is a registered trademark of The Clorox Company. Lysol® is a registered trademark of The Linden Company. Windex® is a registered trademark of S.C. Johnson and Son, Inc. Mr. Clean® is a registered trademark of The Proctor and Gamble Company. Dow® is a registered trademark of The Dow Chemical Company. AS America, Inc. Limited Lifetime W...

Descargar ahora

Introduzca dos números de la imagen: