Iniciar sesión:
Votos - 4, Puntuación media: 4.3 ( )

Manual de usuario Invacare, modelo 6316

Fabricar: Invacare
Tamaño del archivo: 101.78 kb
Nombre del archivo: 1070889.pdf
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


The internal leg extension, found on the Deluxe/Vinyl padded shower chair, removes in the same manner. Snap Button Leg Extension FIGURE 2 - REMOVING THE EXISTIING LEG EXTENSIONS 1 INSTALLING THE LEG EXTENSIONS W/3-INCH SUCTION CUPS WARNING Make sure that the snap buttons protrude through the same respective adjustment hole of each leg extension and an even height adjustment is achieved. Ensure that the leg extensions are securely locked in place. NOTE: Adjustability on the external leg extensions is obtained by the holes provided on the leg extension itself. Adjustability on the internal leg extensions is obtained by the holes provided on the legs of the Deluxe/ Vinyl padded shower chair. 1. Shower Chair: Install the NEW leg extensions w/3inch suction cups onto the existing shower chair where the four (4) existing legs were just removed. 2. Transfer Bench: Install the NEW leg extensions w/ 3-inch suction cups onto the Transfer Bench where the two (2) existing leg extensions were just removed. NOTE: Remember that some tub floors are higher than the bathroom floor. It may be necessary to make the leg extensions w/suction cups shorter than the legs on the bathroom floor to ensure theTransfer Bench sits level. USING THE LEG EXTENSIONS W/3-INCH SUCTION CUPS Shower Chair WARNING The shower chair can ONLY be used in an area where all four legs are in contact with the floor and the shower chair sits level. NEVER use the shower chair in a bathtub. 1. Place the shower chair in an area where all four legs with suction cups are in contact with the floor and the shower chair sits level. NEVER use the shower chair in a bathtub. Transfer Bench (FIGURE 3) WARNING Bathtub floor should be dry and free of dirt, oils etc. before installation. 1. Place the transfer bench into position over the bathtub with suction cups inside the bathtub and press down to adhere suction cups to the bathtub floor. 2. To release the suction cups from tub floor, grip the tabs on the suction cups and gently pull. The suction cups will release and transfer bench can be removed. Bathtub Transfer Bench Wall Leg Extension Bathtub Bathroom with Suction Cups Floor Floor FIGURE 3 - USING THE LEG EXTENSIONS W/ 3-INCH SUCTION CUPS - TRANSFER BENCH 2 1 4 5 6 7 Tab Tab 1 3 Tab Tab 2 1 4 5 6 7 Tab Tab 1 3 Tab Tab 2 Model No. 6312 Internal Leg Extension Model No. 6314 External Leg Extension Tab 2 3 2 Tab 1 1 3 Model No. 6316 Model No. 6318 External Leg Extension External Leg Extension FIGURE 1 - LEG EXTENSIONS W/ 3-INCH SUCTION CUPS PARTS LIST QUANTITY ITEM DESCRIPTION 6312 6314 6316 6318 1. 2. 3. 4. 5. 6. 7. SUCTION CUPEXTERNAL LEG EXTENSIONANTI-RATTLE INTERNAL LEG EXTENSIONRELEASE SPRINGSNAP BUTTONRETAINING SCREW 2 N/AN/A 2 2 2 2 2 2 2 N/A N/A N/A N/A 2 2 2 N/A N/AN/A N/A 2 2 2 N/A N/A N/A N/A 3 LIMITED WARRANTY PLEASE NOTE: THE WARRANTY BELOW HAS BEEN DRAFTED TO COMPLY WITH FEDERAL LAW APPLICABLE TO PRODUCTS MANUFACTURED AFTER JULY 4, 1975. This warranty is extended only to the original purchaser/...

Otros modelos de este manual:
Baño - 6312 (101.78 kb)
Baño - 6314 (101.78 kb)
Baño - 6318 (101.78 kb)

Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría