Votos - 6, Puntuación media: 4.5
(
)
)
|
Resumen del manual
11 1-4-2 Parallel & USB2.0 Interface........................................................................11 1-4-3 Auto Cutter Enable / Disable selection .......................................................12 1-5 Setting the Memory Switches .................................................................................13 1-6 Installing or Replacing the Paper Roll.....................................................................16 1-7 Adjustments and Settings.......................................................................................18 1-8 Using the Printer.....................................................................................................18 1-9 Connecting the computer........................................................................................19 1-10 Connecting the Power Supply ..............................................................................19 2. Self test.......................................................................................................................20 3. Hexadecimal Dumping ..............................................................................................21 4. Specification ..............................................................................................................22 5. Appendix ....................................................................................................................23 5-1 Cleaning Printer......................................................................................................23 5-2 Using Wall Mount....................................................................................................23 Rev. 1.00 - 6 - Rev. 1.00 - 7 - SRP-350/352plusIIA&C 1. Setting Up the Printer 1-1 Unpacking Your printer box should include these items. If any items are damaged or missing, please contact your dealer for assistance. SRP-350/352plusIIC SRP-350/352plusIIA Cover Cable Roll Paper Manual AC Adapter Power Cord CD USB A-A CABLE SRP-350/352plusIIA&C 1-2 Connecting the Cables You can connect up the three cables to the printer. They all connect to the connector panel on the back of the printer, which is shown below: . NOTE Before connecting any of the cables, make sure that both the printer and the host are turned off. 1-2-1 Serial Interface (RS-232C) Interface connector Power supply connector . When the Dip Switch is “ON” on the Serial Interface Board, DTR and RTS are connected each other. Drawer kick-out connector PRINTER SIDE (25P) HOST SIDE (25P) PRINTER SIDE (25P) HOST SIDE (9P) PRINTER SIDE (9P) HOST SIDE (9P) Pin No. Signal Name Signal Direction Function BODY Frame GND -Frame Ground 2 TXD Output Transmit Data 3 RXD Input Receive Data 6 DSR Input This signal indicates whether the host computer can receive data. (H/W flow control) 1) MARK(Logic1) : The host can receive a data. 2) SPACE(Logic0) : The host can not receive a data. 3) The printer transmits a data to the host, after confirming this signal. 4) When XON/XOFF flow control is selected, the printer does not check this signal. 7 Signal GND -Signal Ground 20 DTR Output This signal indicates whether the printer is busy. (H/W flow control) 1) MARK(Logic1) : The printer is busy. 2) SPACE(Logic0) : The printer is not busy. 3) The host transmits a data to the printer, after confirming this signal. 4) When XON/XOFF flow control is selected, the host does not check this signal. Shield Frame GND -Frame Ground Rev. 1.00 - 8 - SRP-350/352plusIIA&C 1-2-2 Parallel Interface (IEEE1284) Interface connector Drawer Power kick-out supply connector connector Pin No. Source Compatibility Mode Nibble Mode Byte Mode 1 Host nStrobe HostClk HostClk 2 Host / Printer Data 0 (LSB) -Data 0 (LSB) 3 Host / Printer Data 1 -Data 1 4 Host / Printer Data 2 -Data 2 5 Host / Printer Data 3 -Data 3 6 Host / Printer Data 4 -Data 4 7 Host / Printer Data 5 -Data 5 8 Host / Printer Data 6 -Data 6 9 Host / Printer Data 7 (MSB) -Data 7 (MSB) 10 Printer nAck PtrClk PtrClk 11 Printer Busy PtrBusy /Data3,7 PtrBusy 12 Printer Perror AckDataReq/Data2,6 AckDataReq 13 Printer Select Xflag /Data1,5 Xflag 14 Host nAutoFd HostBusy HostBusy 15 NC NC NC 16 GND GND GND 17 FG FG FG 18 Printer Logic-H Logic-H Logic-H 19~30 GND GND GND 31 Host nInit nInit nInit 32 Printer nFault nDataAvail /Data0,4 nDataAvail 33 GND ND ND 34 Printer DK_Status ND ND 35 Printer +5V ND ND 36 Host nSelectIn 1284-Active 1284-Active Rev. 1.00 - 9 - SRP-350/352plusIIA&C 1-2-3 USB2.0 Interface Drawer Power USB2.0 connector kick-out supply connector connector Pin No. Signal Name Assignment (Color) Function Shell Shield Drain Wire Frame Ground 1 VBUS Red Host Power : DC5[V] / 500[mA] 2 D-White Differential Data Line 3 D+ Green Differential Data Line 4 GND Black Signal Ground 1-3 Connecting the Drawer . WARNING Use a drawer that matches the printer specification. Using an improper drawer may damage the drawer as well as the printer. . CAUTION Do not connect a telephone line to the drawer ki...
Otros modelos de este manual:Impresoras - SRP-350 (949.65 kb)
Impresoras - SRP-352 (949.65 kb)
Impresoras - SRP-352 (949.65 kb)